Mercedes-Benz ML320. Service manual — part 116
291
Technical data
Warranty coverage
왔
Warranty coverage
Your vehicle is covered under the terms of
the “warranties” printed in the Service and
Warranty Information booklet. Your
authorized Mercedes-Benz Light Truck
Center will exchange or repair any defec-
tive parts originally installed on the vehicle
in accordance with the terms of the follow-
ing warranties:
앫
New Vehicle Limited Warranty
앫
Emission System Warranty
앫
Emission Performance Warranty
앫
California, Maine, Massachusetts, and
Vermont Emission Control Systems
Warranty
Replacement parts and accessories are
covered by the Mercedes-Benz Spare Parts
and Accessories warranties, copies of
which are available at any Mercedes-Benz
Center.
Loss of Service and Warranty
Information Booklet
Should you lose your Service and Warranty
Information booklet, have your authorized
Mercedes-Benz Center arrange for a
replacement. It will be mailed to you.
292
Technical data
Identification labels
왔
Identification labels
1 Certification label and Paintwork num-
ber
2 Engine number (engraved on engine)
3 VIN, visible (lower edge of windshield)
4 Emission control label
Vacuum line routing for emission con-
trol system
5 Information label, California version
i
When ordering spare parts, please
specify vehicle identification and en-
gine numbers.
293
Technical data
Layout of poly-V-belt drive
왔
Layout of poly-V-belt drive
1 Automatic belt tensioner
2 Power steering pump
3 Air conditioning compressor
4 Crankshaft
5 Coolant pump
6 Generator (alternator)
7 Idler pulley
294
Technical data
Engine
왔
Engine
Model
ML 350 (163.157
1
)
1
The quoted data apply only to the standard vehicle. See an authorized Mercedes-Benz Light Truck Center for the corresponding data of all special bodies and special
equipment.
ML 500 (163.175)
1
Engine
112
113
Mode of operation
4-stroke engine, gasoline injection
4-stroke engine, gasoline injection
No. of cylinders
6
8
Bore
3.81 in (97.00 mm)
3.81 in (97.00 mm)
Stroke
3.31 in (84.00 mm)
3.31 in (84.00 mm)
Total piston displacement
227 cu in (3724 cm
3
)
303 cu in (4966 cm
3
)
Compression ratio
10:1
10:1
Output acc. to SAE J 1349
232 hp/5750 rpm
(173 kW/5750 rpm)
288 hp/5600 rpm
(215 kW/5600 rpm)
Maximum torque acc. to SAE J 1349
254 lb-ft/3000-4500 rpm
(345 Nm/3000-4500 rpm)
325 lb-ft/2700 rpm
(440 Nm/2700 rpm)
Maximum engine speed
6000 rpm
6000 rpm
Firing order
1-4-3-6-2-5
1-5-4-2-6-3-7-8
Poly-V-belt
2 370 mm
2370 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст