Mercedes-Benz ML320. Service manual — part 667
Fig. 45: Identifying Blower Switch - Model 163 As Of 1.9.01 With Code (580a Automatic Air
Conditioning
AIR DISTRIBUTION SWITCH, FUNCTION - GF83.25-P-2101-01GH
Function
Turning the air distribution switch causes two wire cables to move the air distribution flaps, in order to route air
through the air distribution system to the air vents. The air vents are:
defroster vents for windshield/side windows
center air vents
lower air vents
There are 12 possible indented positions for air distribution.
AIR DISTRIBUTION SWITCH, FUNCTION - GF83.25-P-2101-01GI
Function
The air distribution can be set manually or automatically:
Manual
Turning the air distribution switch
Blower
switch,
location
The blower switch (1) is located on left in the AAC push-button control module (N22).
Blower
switch, task
The blower switch (1) activates several blower stages in fresh air and recirculating air
mode.
Blower
switch design
The blower switch (1) is equipped with a rotary ring with which the blower levels can be
set. The LEDs in the rotary ring display the set blower level.
Blower
switch,
function
The blower switch (1) sets the control voltage for the blower regulator in 6 stages and 5
intermediate settings via the push-button control module, depending on the setting. This
facilitates blower speed control of 0 -100 %.
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Automatic
Pressing the Auto button (
)
Turning the air distribution switch on the AAC push-button control module (N22) actuates the various air
distribution actuators via air conditioner bus.
The following basic settings for air distribution are provided:
Air flow from center and side vents
Air flow at center, side,
footwell and defroster vents
Air outlet at the center, side and defroster vents
Air flow at center, side and footwell vents
Apart from the 4 listed basic settings, a further 8 intermediate settings can be selected.
AIR DISTRIBUTION SWITCH, LOCATION - GF83.25-P-2101-02GH
Heater depiction
The air distribution switch (3) is located in the heater control unit (S98).
Fig. 46: Identifying Air Distribution Switch
AIR DISTRIBUTION SWITCH, LOCATION/TASK/DESIGN/FUNCTION - GF83.25-P-2101GH
MODEL 163 up to 31.8.01
Air distribution
switch, location
GF83.25-P-
2101-02GH
Air distribution
switch, task
The air distribution switch regulates the flow of air through the air
distribution system to the air vents for ventilation of the passenger
compartment.
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
AIR DISTRIBUTION SWITCH, LOCATION/TASK/DESIGN/FUNCTION - GF83.25-P-2101GI
MODEL 163 as of 1.9.01 with code (580a) Automatic air conditioning
Fig. 47: Identifying Air Distribution Switch - Model 163 As Of 1.9.01 With Code (580a) Automatic Air
Conditioning
TEMPERATURE SELECTOR WHEEL, FUNCTION - GF83.25-P-2102-01GH
Function
Heating
By rotating the temperature selector wheel, a cable is moved via a disk cam, thereby actuating the blending air
flaps.
Air conditioning
The air temperature is regulated by a rotary control with a variable resistor. Signals from the resistor and AAC
control module determine the desired interior temperature. If the temperature selector wheel is turned in an anti-
Air distribution
switch, design
The air distribution switch is designed as a rotary switch with 12
indented positions for air distribution.
Air distribution
switch, function
GF83.25-P-
2101-01GH
Air distribution
switch, location
The air distribution switch (3) is located on the right in the AAC
push-button control module (N22).
Air distribution
switch, task
The air distribution switch (3) controls the air flow to the air outlets
for ventilation of the passenger compartment.
Air distribution
switch, design
The air distribution switch (3) is equipped with a rotary ring, with
which the air distribution can be set. The LEDs in the rotary ring
display the air distribution level.
Air distribution
switch, function
GF83.25-P-
2101-01GI
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
clockwise direction to the final indented position (max. cooling), the recirculation switch is bypassed and thus
the fresh air flaps closed, in order to achieve the max. interior cooling (with A/C ON).
TEMPERATURE SELECTOR WHEEL, FUNCTION - GF83.25-P-2102-01GI
Function
The desired in-car temperature is set by turning the temperature selector wheel on the AAC push-button control
module (N22).
The AAC push-button control module (N22) compares the desired temperature with the temperature in the
passenger compartment. The passenger compartment temperature is determined by the in-car temperature
sensor on the AAC push-button control module (N22) and the temperature sensor for the vent air at the center
nozzle, front and rear footwells.
Using the comparison between specified and actual values, the AAC push-button control module (N22)
determines the correct setting of the blending air flaps and actuates these. The selected temperature is reached
and maintained as quickly as possible, if warming or cooling of the interior is necessary.
TEMPERATURE SELECTOR WHEEL, LOCATION - GF83.25-P-2102-02GH
Heater depiction
The temperature selector wheel (2) is located in the heater control unit.
Fig. 48: Identifying Temperature Selector Wheel On Heater Control Unit - Model 163
TEMPERATURE SELECTOR WHEEL, LOCATION/TASK/DESIGN/FUNCTION - GF83.25-P-2102GC
MODELS 163 up to 31.8.01, 168 up to 28.2.01
Temperature selector
wheel, location
Model 168
GF83.25-P-
2102-02GC
Model 163
GF83.25-P-
2102-02GH
Temperature selector The temperature selector wheel serves to preselect the
2001 Mercedes-Benz ML320
1998-2005 HVAC Climate Control - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст