Mercedes-Benz: engine M272, M273. Service manual — part 10
AR05.20-P-6010EW
Check basic position of camshafts
2.12.09
ENGINES 272, 273 in MODEL 212
1
Marking on belt pulley
2
positioning edge on timing case cover
3
Pulse wheel markings
P05.20-2163-06
Remove/install
1
Remove front engine cover
See Remove air filter housing.
AR09.10-P-1150EWS
2
Remove Hall sensors on camshafts
*BA15.10-P-1002-03E
Checking
3
Turn engine at crankshaft in direction of
The 305° marking (1) on belt pulley must
rotation of engine (arrow) to a 55° crank
be aligned with positioning edge (2) on
before ignition TDC (305° marking on belt
timing case cover and markings (3) on pulse
pulley) and check basic position of
wheels must be located in center of bores
camshafts
for Hall sensors. If necessary:
Set basic position of camshafts.
AR05.20-P-6020EW
*001589650900
4
Install in the reverse order
Risk of accident
Secure vehicle to prevent it from moving by
Danger!
caused by vehicle starting
AS00.00-Z-0005-01A
off by itself when engine is running. Risk of itself.
injury
Wear closed and snug-fitting work clothes.
caused by contusions and burns
during starting procedure or when working
Do not touch hot or rotating parts.
near the engine as it is running
5
Carry out an engine test run and check
engine for leaks
Position sensor
Number
Designation
Engine
Engine
272
273
BA15.10-P-1002-03E
Bolt, camshaft Hall sensor to front cover on cylinder head
Nm
8
8
Страница 1 из 2
© Daimler AG, 07.04.13, G/07/14, ar05.20-p-6010ew, Check basic position of camshafts
ENGINES 272, 273 in MODEL 212
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст