Opel Zafira Tourer (2019 year). Instruction — part 5
70
Storage
Place the housing so that the upper
side is facing to the front and the part
with the handle points upwards.
Insert the load compartment cover
into the opening on the right side of
the storage (1) and turn it until the
handle rests flat on the housing (2).
Fasten the load compartment cover in
the storage with the Velcro tape.
Installing
Insert the left side of the load
compartment cover into the recess,
pull the release lever up and hold,
insert the right side of the load
compartment cover and engage.
Rear floor storage cover
Floor cover
On versions without third seat row,
there are storage boxes under the
floor cover. To open lift up the cover
and fold it upright behind rear seats.
Interior protection mat
Interior protection mat is a covering
and protection feature for the load
compartment, to be used when all or
single seats/backrests are folded
down.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Storage
71
By folding and expanding the mat
there are a range of individual
applications possible.
The interior protection mat is
available in two versions:
● Standard protection mat covers
the area between tailgate and
second seat row, when third row
is complete or if one seat is folded
down.
● Flex cover interior protection
mat is double size of standard
protection mat, connected by a
zipper. It covers the load
compartment fully, when all or
single seats of third and second
row are folded down.
Protection mat is foldable
longitudinally in 4 parts (standard) or
8 parts (Flex cover) with a central
zipper and transversely foldable in
4 parts.
Following only a few examples of
using the mats are described.
Before folding and expanding the
mat, all components must be
removed from the side rails and from
the lashing eyes. Lashing eyes must
be in stored position.
Covering the load compartment
between tailgate and second seat row
possible with both Standard
protection mat or Flex cover interior
protection mat being folded at the
zipper to half size (double layer).
Mat is located fourfold flapped behind
the raised up seats of the third row.
● Fold down third row seats.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
72
Storage
● Expand the parts of the folded
mat, so that first part is raised up
at second row backrest.
● When folding down second row
backrests, the mat expands
automatically and covers the
space between both seat rows.
● To allow one seat in the third row
to be raised up, fold mat in half
lengthways.
● Pull out the mat a little to protect
load compartment sill when
loading heavy objects. Raise up
the overlaying part of the mat
before closing the tailgate.
Covering the load compartment up to
the backrests of the front seats
Only possible with Flex cover interior
protection mat being folded at the
zipper to half size (double layer).
Mat is expanded up to the second row
seats, as described previously.
● Fold down second row backrests.
● Expand the upper parts of the
double layer mat, so that the load
compartment is fully covered.
The first part of the mat is now
raised up at the backrests of front
seats.
● Fold the overlaying rear part
under the mat before closing the
tailgate.
Covering the load compartment
partially
Only possible with Flex cover interior
protection mat being folded at the
zipper to half size (double layer).
Application example: left outer
backrest is not folded down
Mat is expanded up to the second row
seats, as described in first section.
● Fold down the backrests that
shall be covered.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Storage
73
● Open the zipper behind the
raised up backrest.
● Pull out the mat until the first part
is flat on the load compartment
floor.
● Raise up lengthways the part that
is opened by the zipper, and fold
it to the centre.
● Expand the upper part of double
layer mat over the folded
backrests.
● Fold the overlaying rear part
under the mat before closing the
tailgate.
Proceed in the same way when one
outer backrest and the centre
backrest are not folded down.
Application example: only centre
backrest is folded down
Mat is expanded up to the second row
seats, as described in first section.
● Fold down centre backrest to be
covered.
● Open the zipper from both sides
behind the left and right backrest.
● Pull out the mat until the first part
is flat on the load compartment
floor.
● Raise up lengthways both parts
that are opened by the zipper,
and fold them to the centre.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
74
Storage
● Then expand the small upper
part of double layer mat over the
centre backrest.
● Fold the overlaying rear part
under the mat before closing the
tailgate.
The following illustrations show some
further examples.
Example for long small objects, e.g.
skis.
Example for side cover protection.
Example for covering folded backrest
on second row and one folded seat on
third row.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Storage
75
Load rails and hooks
Install the hooks in the desired
position in the rails: insert the hook in
the upper groove on the rail and press
in the lower groove.
Lashing eyes
The lashing eyes are designed to
secure items against slippage, e.g.
using lashing straps or luggage net.
Cargo management system
The FlexOrganizer is a flexible
system for dividing up the load
compartment.
The system consists of:
● adapters
● mesh pockets
● hooks
● variable partition net
The components are fitted in rails on
both side panels using adapters and
hooks.
Installation of adapters in the rails
Fold open the handle plate, insert the
adapter into the upper and lower
groove of the rail and move to the
required position. Turn the handle
plate upwards to lock the adapter. To
remove, turn the handle plate down
and move out of the rail.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
76
Storage
Variable partition net
Insert adapters into the required
position in the rails. Stick together the
halves of the net rods.
To install, push rods together a little
and insert into the relevant openings
in the adapters.
To remove, press the net rods
together and remove from the
adapters.
Net pocket
Insert adapters into the required
position in the rails. The net pocket
can be suspended from the adapters.
Installation of hooks in the rails
Insert the hook in the desired position
first in the upper groove of the rail and
then press in the lower groove. To
remove, first pull out of the upper
groove.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Storage
77
Partitioning net in front of tailgate
Install directly in front of the tailgate.
Before installation push in the four
end pieces of the net rod by rotating
each end piece anticlockwise.
To install, push the net rods together
and insert into the openings of the
tailgate frame. The longer rod must
be inserted at the top.
To remove, push the net rods
together and remove.
Safety net
The safety net can be installed behind
the seats of the second row or the
front seats.
Passengers must not be transported
behind the safety net.
Installation behind second row
seats
● There are installation openings
on both sides in the roof frame
above second row seats:
suspend and engage rod of net at
one side, compress rod and
suspend and engage at the other
side.
● Attach hooks of safety net straps
to front lashing eyes on both
sides in the load compartment.
● Tension both straps by pulling at
the loose end.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
78
Storage
Installation behind front seats
● There are installation openings
on both sides in the roof frame
above the front seats: suspend
and engage rod of net at one
side, compress rod and suspend
and engage at the other side.
● Attach hooks of safety net straps
to the lashing eyes on both sides
in the floor in front of the seats.
● Tension both straps by pulling at
the loose end.
Removal
Push button on the tightener to
release the strap on both sides.
Detach hooks from the eyes. Unhook
the safety net rods from the brackets
in the roof frame. Roll up the net and
secure with a strap.
Stowing
Open the cover of the storage in the
load compartment floor in front of the
tailgate.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Storage
79
Insert the safety net in the storage
and close cover.
Folding tray
Located in the front seat backrests.
Open by pulling upwards until it
engages.
Fold away by pressing down past the
resistance point.
Do not place any heavy objects on the
folding tray.
Warning triangle
Stow the warning triangle in the
storage of the load compartment floor
in front of the tailgate.
First aid kit
Stow the first aid kit and the high
visibility vest under the driver's seat.
Use the straps to fix.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
80
Storage
On another version, first aid kit is
located in a storage box under the
driver's seat. Slide the rollo to open or
close the box.
Roof rack system
Roof rack
For safety reasons and to avoid
damage to the roof, the vehicle
approved roof rack system is
recommended. For further
information contact your workshop.
Follow the installation instructions
and remove the roof rack when not in
use.
Mounting roof rack
Vehicles with roof railing
Fasten the roof rack in the area of the
holes.
Vehicles without roof railing
To fasten a roof rack, open the caps
in the roof strips. Insert the mounting
provisions, as instructed, in the
retainer indicated in the illustration.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Storage
81
Loading information
● Heavy objects in the load
compartment should be placed
against the seat backrests.
Ensure the backrests are
securely engaged. If objects can
be stacked, the heavier objects
should be placed at the bottom.
● Prevent sliding of loose objects
by securing them with straps
attached to the lashing eyes
● Do not allow the load to protrude
above the upper edge of the
backrests.
● Do not place any objects on the
load compartment cover or the
instrument panel.
● The load must not obstruct the
operation of the pedals, parking
brake and gear selector lever, or
hinder the freedom of movement
of the driver. Do not place any
unsecured objects in the interior.
● Do not drive with an open load
compartment.
9 Warning
Always make sure that the load in
the vehicle is securely stowed.
Otherwise objects can be thrown
around inside the vehicle and
cause personal injury or damage
to the load or car.
● The payload is the difference
between the permitted gross
vehicle weight (see identification
weight.
To calculate the payload, enter
the data for your vehicle in the
weights table at the front of this
instruction.
The EC kerb weight includes
weights for the driver (68 kg),
luggage (7 kg) and all fluids (fuel
tank 90% full).
Optional equipment and
accessories increase the kerb
weight.
● Driving with a roof load increases
the sensitivity of the vehicle to
cross-winds and has a
detrimental effect on vehicle
handling due to the vehicle's
higher centre of gravity.
Distribute the load evenly and
secure it properly with retaining
straps. Adjust the tyre pressure
and vehicle speed according to
the load conditions. Check and
retighten the straps frequently.
Do not drive faster than
120 km/h.
The permissible roof load is
75 kg for vehicles without roof
railing and 100 kg for vehicles
with roof railing. The roof load is
the combined weight of the roof
rack and the load.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
82
Instruments and controls
Instruments and
controls
Controls . . . . . . . . . ... 83
Steering wheel adjustment . . 83
Steering wheel controls . . . . 83
Heated steering wheel . . . ... 83
Horn . . . . . . . . . . ... 84
Windscreen wiper and washer . . 84
Rear window wiper and
washer . . . . . . . . . .. 85
Outside temperature . . . . .. 86
Clock . . . . . . . . . . . 86
Power outlets . . . . . . . . 87
Cigarette lighter . . . . . . . 88
Ashtrays . . . . . . . . . 88
Warning lights, gauges and indi‐
cators . . . . . . . . . . ... 89
Instrument cluster . . . . . .. 89
Speedometer . . . . . . . . 89
Odometer . . . . . . . . .. 89
Trip odometer . . . . . . . 89
Tachometer . . . . . . . ... 90
Fuel gauge . . . . . . . . 90
Engine coolant temperature
gauge . . . . . . . . . ... 90
Service display . . . . . . .. 91
Control indicators . . . . . .. 92
Turn lights . . . . . . . . .. 94
Seat belt reminder . . . . . . 95
Airbag and belt tensioners . . . 95
Airbag deactivation . . . . . 96
Charging system . . . . . ... 96
Malfunction indicator light . . .. 96
Brake and clutch system . . ... 96
Operate pedal . . . . . . . 97
Electric parking brake . . . . 97
Electric parking brake fault . . 97
Antilock brake system (ABS) . . 97
Gear shifting . . . . . . . .. 98
Power steering . . . . . . .. 98
Following distance . . . . . . 98
Lane departure warning . . . 98
Electronic Stability Control off ... 98
Electronic Stability Control and
Traction Control system . . ... 98
Traction Control system off . ... 98
Preheating . . . . . . . . . 99
Exhaust filter . . . . . . . .. 99
AdBlue . . . . . . . . . ... 99
Tyre pressure monitoring
system . . . . . . . . . .. 99
Engine oil pressure . . . . . 99
Low fuel . . . . . . . . ... 100
Immobiliser . . . . . . . .. 100
Exterior light . . . . . . . 100
High beam . . . . . . . ... 100
High beam assist . . . . . . 100
LED headlights . . . . . . 100
Front fog lights . . . . . . . 100
Rear fog light . . . . . . ... 100
Cruise control . . . . . . .. 100
Adaptive cruise control . . . 101
Vehicle detected ahead . . ... 101
Speed limiter . . . . . . ... 101
Traffic sign assistant . . . . 101
Door open . . . . . . . . 101
Displays . . . . . . . . . . 101
Driver Information Centre . . 101
Info Display . . . . . . . .. 105
Vehicle messages . . . . . .. 106
Warning chimes . . . . . ... 107
Battery voltage . . . . . . 107
Vehicle personalisation . . . .. 108
Telematics service . . . . . . 109
OnStar . . . . . . . . . . 109
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
83
Controls
Steering wheel adjustment
Unlock lever, adjust steering wheel,
then engage lever and ensure it is
fully locked.
Do not adjust steering wheel unless
vehicle is stationary and steering
wheel lock has been released.
Steering wheel controls
The Infotainment system, some driver
assistance systems and a connected
mobile phone can be operated via the
controls on the steering wheel.
Further information is available in the
Infotainment instruction.
Driver assistance systems 3 203.
Heated steering wheel
Activate heating by pressing *.
Activation is indicated by the LED in
the button.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
84
Instruments and controls
The recommended grip areas of the
steering wheel are heated quicker
and to a higher temperature than the
other areas.
Heating is operational when the
engine is running and during an
Autostop.
Stop-start system 3 185.
Horn
Press j.
Windscreen wiper and
washer
Windscreen wiper
HI
: fast
LO : slow
INT : interval wiping or automatic
wiping with rain sensor
OFF : off
For a single wipe when the
windscreen wiper is off, press the
lever down to position 1x.
Do not use if the windscreen is frozen.
Switch off in car washes.
Adjustable wiper interval
Wiper lever in position INT.
Turn the adjuster wheel to adjust the
desired wipe interval:
short interval
: turn adjuster
wheel upwards
long interval
: turn adjuster
wheel downwards
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
85
Adjustable sensitivity of the rain
sensor
Wiper lever in position INT.
Turn the adjuster wheel to adjust the
sensitivity of the rain sensor.
The rain sensor detects the amount of
water on the windscreen and
automatically regulates the wiping
frequency and speed.
After 20 seconds without wiping
activity, the wiper arms move slightly
down to park position.
Keep the sensor free from dust, dirt
and ice.
Windscreen washer
Pull lever. Washer fluid is sprayed
onto the windscreen and the wiper
wipes a few times.
Washer fluid 3 244
Rear window wiper and
washer
Press the rocker switch to activate the
rear window wiper:
upper position : continuous
operation
lower position : intermittent
operation
middle position : off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст