Opel Movano (2018 year). Instruction — part 3
Keys, doors and windows
39
Instruction windows
The door windows can be opened or
closed with the window cranks.
Power windows
9 Warning
Take care when operating the
power windows. Risk of injury,
particularly to children.
Keep a close watch on the
windows when closing them.
Ensure that nothing becomes
trapped in them as they move.
Switch on ignition to operate power
windows.
Operate the switch for the respective
window by pushing to open or pulling
to close.
For vehicles with automatic opening
feature for the driver's door window;
when opening, operate the switch
again to stop window movement.
In the event of closing difficulties due
to frost or the like, operate the switch
several times to close the window in
stages.
Overload
If the windows are repeatedly
operated within short intervals, the
window operation is disabled for
some time.
Rear windows
Sliding side windows
Press catch and slide window to
open. Ensure catch engages when
closing.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
40
Keys, doors and windows
Press catch and slide window to
open. Ensure catch engages when
closing.
Opening side windows
Pull handle to open window.
Note
Depending on vehicle, some
windows may not open fully.
Emergency exit
To provide an emergency exit from
the vehicle, use hammer 1 to strike
glass 2.
Depending on version, emergency
exit may be via the roof glass panel
Rear reversing lens
A rear reversing lens may be fitted to
the rear window.
The rear reversing lens assists the
driver when reversing by reducing
blind spots.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Keys, doors and windows
41
Heated rear window
Operated by pressing Ü on either
system. LED illuminates in button
during operation.
Heating works with the engine
running and is switched off
automatically after a short time.
Climate control system 3 117.
Electronic climate control system
Sun visors
The sun visors can be folded down or
swivelled to the side to prevent
dazzling.
If the sun visors have integral mirrors,
the mirror covers should be closed
when driving.
Sun visors may also feature a holder
for parking tickets etc.
Wide view mirror 3 38.
Roof
Glass panel
Depending on model variant, the load
compartment may incorporate a
single or a double glass roof panel.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
42
Keys, doors and windows
Emergency exit
In an emergency, the glass can be
broken. Use the hammer provided to
strike the glass panel.
Depending on version, emergency
exit may alternatively be via the side
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Seats, restraints
43
Seats, restraints
Head restraints . . . . . . . 43
Front seats . . . . . . . . ... 44
Seat position . . . . . . . .. 44
Seat adjustment . . . . . . 45
Armrest . . . . . . . . . .. 49
Heating . . . . . . . . . .. 50
Rear seats . . . . . . . . ... 50
Seat belts . . . . . . . . . . 53
Three-point seat belt . . . . . 54
Airbag system . . . . . . . .. 57
Front airbag system . . . . ... 60
Side airbag system . . . . . 61
Airbag deactivation . . . . . 61
Child restraints . . . . . . . . 63
Child restraint systems . . . .. 63
Child restraint installation
locations . . . . . . . . ... 66
Head restraints
Position
9 Warning
Only drive with the head restraint
set to the proper position.
The upper edge of the head restraint
should be at upper head level. If this
is not possible for extremely tall
people, set to highest position, and
set to lowest position for small people.
Adjustment
Pull up to raise or press button and
lower head restraint. Ensure the head
restraint engages.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
44
Seats, restraints
Depending on version, head
restraints can also be tilted forwards
or backwards. Push or pull the lower
part of the head restraint to adjust.
Note
Approved accessories may only be
attached to the front passenger seat
head restraint if the seat is not in use.
Removal
E.g. when using a child restraint
system 3 63.
First tilt the backrest forwards, then
pull up head restraint to uppermost
position. Press both release buttons
and pull the head restraint upwards to
remove.
Stow head restraints securely in load
compartment.
Do not drive with head restraints
removed if the seat is occupied.
Installation
First tilt the backrest forwards, then
insert the rods of the head restraint
into their holes.
Lower head restraint as far as
possible, then raise head restraint
(press both release buttons first, if
necessary) until it engages securely
in desired position.
Front seats
Seat position
9 Warning
Only drive with the seat correctly
adjusted.
9 Danger
Do not sit closer than 25 cm to the
steering wheel, to permit safe
airbag deployment.
9 Warning
Never adjust seats while driving as
they could move uncontrollably.
9 Warning
Never store any loose objects
under the seats.
Underseat storage, storage box
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Seats, restraints
45
● Sit with buttocks as far back
against the backrest as possible.
Adjust the distance between the
seat and the pedals so that legs
are slightly angled when pressing
the pedals. Slide the front
passenger seat as far back as
possible.
● Set seat height high enough to
have a clear field of vision on all
sides and of all display
instruments. There should be at
least one hand of clearance
between head and the roof
frame. Thighs should rest lightly
on the seat without pressing into
it.
● Sit with shoulders as far back
against the backrest as possible.
Set the backrest rake so that it is
possible to reach the steering
wheel with arms slightly bent.
Maintain contact between
shoulders and the backrest when
turning the steering wheel. Do
not angle the backrest too far
back. We recommend a
maximum rake of approx. 25°.
● Adjust seat and steering wheel in
a way that the wrist rests on top
of the steering wheel while the
arm is fully extended and
shoulders on the backrest.
● Adjust the steering wheel 3 85.
● Adjust the head restraint 3 43.
● Adjust the height of the seat belt
● Adjust the lumbar support so that
it supports the natural shape of
the spine 3 45.
Seat adjustment
Drive only with engaged seats and
backrests.
Longitudinal adjustment
Pull handle, slide seat, release
handle.
Try to move the seat back and forth to
ensure that the seat is locked in place.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
46
Seats, restraints
Suspension seat longitudinal
adjustment
Pull handle, slide seat, release
handle.
Try to move the seat back and forth to
ensure that the seat is locked in place.
Backrest inclination
Pull lever, adjust inclination and
release lever. Allow the seat to
engage audibly.
Suspension seat backrest inclination
Pull lever, adjust inclination and
release lever. Allow the seat to
engage audibly.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Seats, restraints
47
Seat height
Lever pumping motion
up
: seat higher
down : seat lower
Suspension seat height
Pull up front release lever up to adjust
height of front part of seat.
Pull up rear release lever to adjust
height of rear part of seat.
Lumbar support
Adjust lumbar support to suit personal
requirements.
Increasing and decreasing support:
turn the handwheel while relieving the
load on the backrest.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
48
Seats, restraints
Suspension seat lumbar support
Adjust lumbar support to suit personal
requirements.
Operate hand pump repeatedly
(located on underside of unit) to
increase firmness.
Press release button (located at front
of unit) to decrease firmness.
Suspension seat sensitivity
Rotate knob to adjust the sensitivity of
the suspension seat.
turn right : more stiff
turn left : less stiff
Swivel seat adjustment
Seat positioning
Move handle 2, slide seat, release
handle.
Try to move the seat back and forth to
ensure that the seat is locked in place.
Seat backrests
Pull lever 1, adjust inclination and
release lever. Allow the seat to
engage audibly.
Seat base angle
Move handle 3 to adjust angle of seat
base.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Seats, restraints
49
Lumbar support
Adjust lumbar support to suit personal
requirements.
Operate hand pump 8 repeatedly
(located on underside of unit) to
increase firmness.
Press release button 7 to decrease
firmness.
Seat base positioning
Lift handle 5, move seat base
backwards or forwards, release
handle.
Armrests
To adjust the height of the armrests,
turn control knob 4 or 9.
Swivelling the seat
The driver's seat can be swivelled up
to 180° from the forward-facing
position, e.g. for easier access to the
load compartment area when the
vehicle is stationary and the engine is
switched off.
Before swivelling the seat, make the
following preparations:
● Unfasten seat belt.
● Fold up the armrests.
● Slide seat as far back as
possible.
● Set seat base angle to its lowest
position.
● Adjust backrest inclination to
vertical position.
● Open the driver's door.
Lift handle 6, swivel seat from the
forward-facing position, release
handle.
Always return the seat to the forward-
facing position before driving and
ensure the seat is locked in place
before starting off.
Armrest
Armrests can be folded up when not
required.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
50
Seats, restraints
Heating
Press ß for the respective seat; LED
in switch illuminates. Press other end
of rocker switch to turn seat heating
off.
Vehicles with suspension seat: switch
ß
is located below the backrest
release lever on the outboard side of
the seat.
Seat heating is thermostatically
controlled and switches off
automatically when seat temperature
is sufficient. LED also illuminates
when the system is on, not just when
heating is active.
Prolonged use for people with
sensitive skin is not recommended.
Seat heating is operational when the
engine is running.
Rear seats
Rear seat access
To facilitate access to the 3rd row
seats (where fitted), open sliding side
door and pull release lever on folding
access seat in the 2nd row and fold
the seat backrest forwards. If
necessary, unfasten seat belts from
their buckles.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Seats, restraints
51
9 Warning
Ensure that the backrest returns to
its correct position and the seat
belt buckles are fastened
securely.
Fastening and unfastening seat belt
Sliding door 3 28.
Removable rear seats
9 Warning
When rear seats are being
removed, keep hands and feet
away from the moving area.
Never remove seats while driving
as they could move uncontrollably.
Ensure that the rear seats and
backrests are fully engaged before
occupying the rear seats.
Removal
On some variants, the load
compartment area can be increased
by removing the rear seats.
9
Warning
Removable rear seats are heavy!
Do not attempt to remove without
assistance.
● Pull up lever 1 on both sides of
the seat; the pins 2 visibly
protrude to indicate that the seat
is unlocked.
● Move the seat towards the rear to
release from the floor anchor
points.
● Lift seat to remove.
Installation
When re-installing seats, always
ensure that the row with the folding
access seat B is positioned correctly
in front of the fixed seat row A.
Caution
The 2nd and 3rd row seats are not
interchangeable and must be fitted
back into their original position.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
52
Seats, restraints
Note
Make sure that the anchor points are
clean before installing the seat. They
should be free from grit or any other
item which may prevent the seat
from locking securely.
Position the seat guides immediately
behind the front floor anchor points,
and slide forwards to engage.
The seat locks automatically and the
pins 3 will no longer be visible, to
indicate that the seat is locked.
Caution
When installing the rear seats,
ensure they are properly located
on the floor anchor points and that
the locking catches are fully
engaged.
Consult a workshop if the seats
cannot be locked securely in position.
Bus
Removal
9 Warning
Removable rear seats are heavy!
Do not attempt to remove without
assistance.
Using the tool from the tool kit located
in the glovebox, turn levers to unlock
the seat:
1. Release the outboard fixing.
2. Release the inboard fixing
(located at the base of the seat).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Seats, restraints
53
3. Lift the seat from the rear.
4. Pull the seat towards the centre of
the vehicle to release the seat
completely from its anchor points.
Installation
Note
Make sure that the anchor points are
clean before installing the seat. They
should be free from grit or any other
item which may prevent the seat
from locking securely.
1. Position the seat over the anchor
points.
2. Lower the seat until it audibly
engages in the anchor points.
3. Ensure the seat is locked securely
in position by trying to move the
seat back and forth and from left
to right.
Repeat installation procedure if
necessary.
Consult a workshop if the seat cannot
be locked securely in position.
Seat belts
The seat belts are locked during
heavy acceleration or deceleration of
the vehicle, holding the occupants in
the sitting position. Therefore, the risk
of injury is considerably reduced.
9 Warning
Fasten seat belt before each trip.
In the event of an accident, people
not wearing seat belts endanger
their fellow occupants and
themselves.
Seat belts are designed to be used by
only one person at a time. Child
restraint system 3 63.
Periodically check all parts of the belt
system for damage and proper
functionality.
Have damaged components
replaced. After an accident, have the
belts and triggered belt pretensioners
replaced by a workshop.
Note
Make sure that the belts are not
damaged by shoes or sharp-edged
objects or trapped. Prevent dirt from
getting into the belt retractors.
Seat belt reminder
Depending on version, both front
seats may be equipped with a seat
belt reminder, indicated by control
indicator X in the instrument panel
Belt force limiters
On the front seats, stress on the body
is reduced by the gradual release of
the belt during a collision.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
54
Seats, restraints
Belt pretensioners
In the event of a head-on or rear-end
collision of a certain severity, the front
seat belts are tightened.
9 Warning
Incorrect handling (e.g. removal or
fitting of belts) can trigger the belt
pretensioners.
Deployment of the belt pretensioners
is indicated by continuous illumination
of control indicator v 3 97.
Triggered belt pretensioners must be
replaced by a workshop. Belt
pretensioners can only be triggered
once.
Note
Do not affix or install accessories or
other objects that may interfere with
the operation of the belt
pretensioners. Do not make any
modifications to belt pretensioner
components as this will invalidate
the operating permit of your vehicle.
Three-point seat belt
Seat belts on the front seats
Fasten
Withdraw the belt from the retractor,
guide it untwisted across the body
and insert the latch plate into the
buckle.
Tighten the lap belt regularly whilst
driving by pulling the shoulder belt.
Loose or bulky clothing prevents the
belt from fitting snugly. Do not place
objects such as handbags or mobile
phones between the belt and your
body.
9 Warning
The belt must not rest against hard
or fragile objects in the pockets of
your clothing.
Seat belt reminder X 3 97.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст