Opel Cascada (2017 year). Instruction — part 6
86
Instruments and controls
Engine coolant temperature
gauge
Displays the coolant temperature.
left area : engine operating
temperature not yet
reached
central
area
: normal operating
temperature
right area : temperature too high
Caution
If engine coolant temperature is
too high, stop vehicle, switch off
engine. Danger to engine. Check
coolant level.
Service display
The engine oil life system lets you
know when to change the engine oil
and filter. Based on driving
conditions, the interval at which an
engine oil and filter change will be
indicated can vary considerably.
To display the remaining engine oil
life duration use turn signal lever
buttons:
Press MENU to select the Vehicle
Information Menu X.
Turn the adjuster wheel to select
Remaining Oil Life.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
87
The remaining engine oil life duration
is displayed in percent in the Driver
Information Centre.
Reset
Press SET/CLR on turn signal lever
for several seconds to reset. The
remaining engine oil life duration
page must be active. Switch on
ignition, but not the engine.
The system must be reset every time
the engine oil is changed, to ensure
proper functionality. Seek the
assistance of a workshop.
Next service
When the system has calculated that
engine oil life has diminished, a
warning message appears in the
Driver Information Centre. Have
engine oil and filter changed by a
workshop within one week or
500 km (whichever occurs first).
Driver Information Centre 3 96.
Service information 3 233.
Control indicators
The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. Depending on the
equipment, the position of the control
indicators may vary. When the
ignition is switched on, most control
indicators will illuminate briefly as a
functionality test.
The control indicator colours mean:
red
: danger, important reminder
yellow : warning, information, fault
green : confirmation of activation
blue
: confirmation of activation
white : confirmation of activation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
88
Instruments and controls
Control indicators in the instrument cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
89
Control indicators in the centre
console
Overview
O
X
v
Airbag and belt tensioners and
roll bars 3 90
V
Airbag deactivation 3 90
p
Charging system 3 90
Z
Malfunction indicator light
R
Brake and clutch system 3 91
-
m
j
Electric parking brake fault
u
Antilock brake system (ABS)
R
Upshift 3 92
c
Power steering 3 92
)
a
Electronic Stability Control off
b
Electronic Stability Control and
k
Traction Control system off
!
Preheating 3 93
%
Diesel particle filter 3 93
Y
w
Tyre pressure monitoring
I
i
Low fuel 3 94
d
8
C
High beam 3 95
l
High beam assist 3 95
f
Adaptive forward lighting 3 95
>
r
Rear fog light 3 95
m
Cruise control 3 95
A
Vehicle detected ahead 3 95
h
Turn signal
O
illuminates or flashes green.
Illuminates briefly
The parking lights are switched on.
Flashes
A turn signal or the hazard warning
flashers are activated.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
90
Instruments and controls
Rapid flashing: failure of a turn signal
light or associated fuse, failure of turn
signal light on trailer.
Bulb replacement 3 196, Fuses
204.
Seat belt reminder
Seat belt reminder on front seats
X
for driver's seat illuminates or
flashes red.
k for front passenger seat illuminates
or flashes red, when seat is occupied.
Illuminates
After the ignition has been switched
on until the seat belt has been
fastened.
Flashes
After having started the engine for a
maximum of 100 seconds until the
seat belt has been fastened.
Airbag, belt tensioners and
roll bars
v
illuminates red.
When the ignition is switched on, the
control indicator illuminates for
approx. 4 seconds. If it does not
illuminate, does not extinguish after
4 seconds or illuminates whilst
driving, there is a fault in the airbag
system, in the belt tensioner or the
deployable roll bars. The airbags, belt
pretensioners and roll bars may fail to
trigger in the event of an accident.
Deployment of the belt tensioners,
airbags or deployable roll bars is
indicated by continuous illumination
of v.
9 Warning
Have the cause of the fault
remedied immediately by a
workshop.
Airbag system, belt tensioners 3 58,
Rollover protection system 3 45.
Airbag deactivation
V
illuminates yellow.
The front passenger airbag is
activated.
* illuminates yellow.
The front passenger airbag is
9 Danger
Risk of fatal injury for a child using
a child restraint system together
with activated front passenger
airbag.
Risk of fatal injury for an adult
person with deactivated front
passenger airbag.
Charging system
p
illuminates red.
Illuminates when the ignition is
switched on and extinguishes shortly
after the engine starts.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
91
Illuminates when the engine is
running
Stop, switch off engine. Vehicle
battery is not charging. Engine
cooling may be interrupted. The
brake servo unit may cease to be
effective. Seek the assistance of a
workshop.
Malfunction indicator light
Z
illuminates or flashes yellow.
Illuminates when the ignition is
switched on and extinguishes shortly
after the engine starts.
Illuminates when the engine is
running
Fault in the emission control system.
The permitted emission limits may be
exceeded. Seek the assistance of a
workshop immediately.
Flashes when the engine is
running
Fault that could lead to catalytic
converter damage. Ease up on the
accelerator until the flashing stops.
Seek the assistance of a workshop
immediately.
Brake and clutch system
R
illuminates red.
The brake and clutch fluid level is too
low 3 193.
9 Warning
Stop. Do not continue your
journey. Consult a workshop.
Illuminates after the ignition is
switched on if the instruction parking
brake is applied 3 152.
Operate pedal
-
illuminates or flashes yellow.
Illuminates
Brake pedal must be depressed to
release the electric parking brake
Clutch pedal must be depressed to
start the engine in Autostop mode.
Flashes
Clutch pedal must be depressed for a
main start of the engine 3 18, 3 138.
On some versions, the operate pedal
message is indicated in the Driver
Electric parking brake
m
illuminates or flashes red.
Illuminates
Electric parking brake is applied
-------------------------------------------------------------------------------------------------------------------------------------------------------------
92
Instruments and controls
Flashes
Electric parking brake is not fully
applied or released. Switch on
ignition, depress brake pedal and
attempt to reset the system by first
releasing and then applying the
electric parking brake. If m remains
flashing, do not drive and seek the
assistance of a workshop.
Electric parking brake fault
j
illuminates or flashes yellow.
Illuminates
Electric parking brake is operating
with degraded performance 3 152.
Flashes
Electric parking brake is in service
mode. Stop vehicle, apply and
release the electric parking brake to
reset.
9 Warning
Have the cause of the fault
remedied immediately by a
workshop.
Antilock brake system
(ABS)
u
illuminates yellow.
Illuminates for a few seconds after the
ignition is switched on. The system is
ready for operation when the control
indicator extinguishes.
If the control indicator does not
extinguish after a few seconds, or if it
illuminates while driving, there is a
fault in the ABS. The brake system
remains operational but without ABS
regulation.
Antilock brake system 3 151.
Upshift
R
with the number of the next higher
gear is indicated or is popped up as
full page in the Driver Information
Centre when upshifting is
recommended for fuel saving
reasons.
EcoFlex drive assistant 3 96.
Power steering
c
illuminates yellow.
Illuminates with power steering
reduced
Power steering is reduced due to
overheating of the system. Control
indicator extinguishes when the
system has cooled down.
Stop-start system 3 139.
Illuminates with power steering
disabled
Failure in the power steering system.
Consult a workshop.
Lane departure warning
)
illuminates green or flashes yellow.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
93
Illuminates green
System is switched on and ready to
operate.
Flashes yellow
System recognises an unintended
lane change.
Electronic Stability Control
off
n
illuminates yellow.
The system is deactivated.
Electronic Stability Control
and Traction Control system
b
illuminates or flashes yellow.
Flashes
The system is actively engaged.
Engine output may be reduced and
the vehicle may be braked
automatically to a small degree.
Illuminates
A fault in the system is present. A
warning message appears in the
Driver Information Centre. Continued
driving is possible. The system is not
operational. Driving stability,
however, may deteriorate depending
on road surface conditions.
Have the cause of the fault remedied
by a workshop.
Electronic Stability Control (ESC)
155, Traction Control system (TC)
Traction Control system off
k
illuminates yellow.
The system is deactivated.
Preheating
!
illuminates yellow.
Preheating is activated. Only
activates when outside temperature
is low.
Diesel particle filter
%
illuminates or flashes yellow.
The diesel particle filter requires
cleaning.
Continue driving until %
extinguishes. If possible, do not allow
engine speed to drop below
2000 rpm.
Illuminates
The diesel particle filter is full. Start
cleaning process as soon as
possible.
Flashes
The maximum filling level of the filter
is reached. Start cleaning process
immediately to avoid damage to the
engine.
Diesel particle filter 3 143, Stop-start
AdBlue
Y
flashes yellow.
AdBlue level is low. Refill AdBlue
soon to avoid prevention of the
engine start.
AdBlue 3 144.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
94
Instruments and controls
Tyre pressure monitoring
system
w illuminates or flashes yellow.
Illuminates
Tyre pressure loss. Stop immediately
and check tyre pressure.
Flashes
Fault in system or tyre without
pressure sensor mounted (e.g. spare
wheel). After 60-90 seconds the
control indicator illuminates
continuously. Consult a workshop.
Tyre pressure monitoring system
211.
Engine oil pressure
I
illuminates red.
Illuminates when the ignition is
switched on and extinguishes shortly
after the engine starts.
Illuminates when the engine is
running
Caution
Engine lubrication may be
interrupted. This may result in
damage to the engine and/or
locking of the drive wheels.
1. Depress clutch.
2. Select neutral gear, set selector
lever to N.
3. Move out of the flow of traffic as
quickly as possible without
impeding other vehicles.
4. Switch off ignition.
9 Warning
When the engine is off,
considerably more force is needed
to brake and steer. During an
Autostop the brake servo unit will
still be operational.
Do not remove key until vehicle is
stationary, otherwise the steering
wheel lock could engage
unexpectedly.
Check oil level before seeking the
assistance of a workshop 3 191.
Low fuel
i
illuminates or flashes yellow.
Illuminates
Level in fuel tank is too low.
Flashes
Fuel used up. Refuel immediately.
Never run the tank dry.
Catalytic converter 3 144.
Bleeding the diesel fuel system
Immobiliser
d
flashes yellow.
Fault in the immobiliser system. The
engine cannot be started.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
95
Exterior light
8
illuminates green.
The exterior lights are on 3 113.
High beam
C illuminates blue.
Illuminates when high beam is on or
during headlight flash 3 115, or when
high beam is on with high beam assist
or intelligent light range 3 117.
High beam assist
l
illuminates green.
The high beam assist or intelligent
light range is activated 3 115,
Adaptive forward lighting
f
illuminates or flashes yellow.
Illuminates
Fault in system.
Seek the assistance of a workshop.
Flashes
System switched to symmetrical low
beam.
Control indicator f flashes for approx.
4 seconds after the ignition is
switched on as a reminder that the
system has been activated 3 116.
Automatic light control 3 114.
Fog light
>
illuminates green.
The front fog lights are on 3 121.
Rear fog light
r
illuminates yellow.
The rear fog light is on 3 121.
Cruise control
m
illuminates white or green.
Illuminates white
The system is on.
Illuminates green
Cruise control is active.
Cruise control 3 158.
Vehicle detected ahead
A
illuminates green.
A vehicle ahead is detected in the
same lane.
Forward collision alert 3 161.
Door open
h
is indicated as symbol in the Driver
Information Centre when a door or the
boot lid is open.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
96
Instruments and controls
Information displays
Driver Information Centre
The Driver Information Centre is
located in the instrument cluster
between speedometer and
tachometer.
The following main menus can be
indicated in the display and selected
by pushing MENU on the turn signal
lever. Menu symbols are indicated in
the top line of the display:
● Vehicle Information Menu X
● Trip/Fuel Information MenuW
● ECO Information Menu s
Some of the displayed functions differ
when the vehicle is being driven or at
a standstill. Some functions are only
available when the vehicle is being
driven.
Vehicle personalisation 3 104.
Selecting menus and functions
The menus and functions can be
selected via the buttons on the turn
signal lever.
Press MENU to switch between the
menus or to return from a submenu to
the next higher menu level.
Turn the adjuster wheel to highlight a
menu option or set a numeric value.
Press SET/CLR to select a function or
confirm a message.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
97
Vehicle Information Menu X
Press MENU to select X.
Turn the adjuster wheel to select a
submenu. Press SET/CLR to confirm.
Follow the instructions given in the
submenus.
Depending on the version, the
possible submenus may include:
● Unit: displayed units can be
changed
● Tyre Pressure: checks tyre
pressure of all wheels during
driving 3 211
● Tyre Load: select tyre pressure
category according to the
actually inflated tyre pressure
● Remaining Oil Life: indicates
when to change the engine oil
and filter 3 86
● Speed Warning: if exceeding the
preset speed, a warning chime
will be activated
● Traffic Sign Assistant: displays
detected traffic signs for the
current route section 3 174
● Following Dist.: displays the
distance to a preceding moving
vehicle 3 163
Trip/Fuel Information Menu W
Press MENU to select W.
Turn the adjuster wheel to select a
page:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
98
Instruments and controls
Page 1:
● trip odometer 1
● average consumption 1
● average speed 1
Page 2:
● trip odometer 2
● average consumption 2
● average speed 2
Page 3:
● digital speed
● range
● instantaneous consumption
The information of page 1 and
page 2 can be reset separately for
odometer, average consumption and
average speed, making it possible to
display different trip information.
Select pages by turning the adjuster
wheel on the turn signal lever.
Trip odometer 1 or 2
Trip odometer displays the recorded
distance since a certain reset.
Trip odometer counts up to a distance
of 2000 kmand then restarts at 0.
Reset trip odometer by pressing
SET/CLR on the turn signal lever for
a few seconds or by pressing the
reset knob near the speedometer
separately for selected page 1 or 2.
Average consumption 1 or 2
Display of average consumption. The
measurement can be reset at any
time and starts with a default value.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
99
To reset, press SET/CLR for a few
seconds separately for selected
page 1 or 2.
Average speed 1 or 2
Display of average speed. The
measurement can be reset at any
time.
To reset, press SET/CLR for a few
seconds separately for selected
page 1 or 2.
Digital speed
Digital display of the instantaneous
speed.
Range
Range is calculated from current fuel
tank content and current
consumption. The display shows
average values.
After refuelling, the range is updated
automatically after a brief delay.
When the fuel level in the tank is low,
a message appears in the display.
When the tank must be refuelled
immediately, a warning message is
displayed.
Additionally, the control indicator i
in the fuel gauge illuminates or
Instantaneous consumption
Displays the instantaneous
consumption.
ECO Information Menu s
Press MENU to select s.
Turn the adjuster wheel to select a
page:
● Shift indication: Current gear is
indicated inside an arrow. The
digit above recommends
upshifting for fuel saving
reasons.
Eco index display: The current
fuel consumption is indicated on
a segment display. For
economical driving adapt your
driving style to keep the filled
segments within the Eco area.
The more segments are filled, the
higher the fuel consumption.
Simultaneously the current
consumption value is indicated.
● Top Consumers: List of top
comfort consumers currently
switched on is displayed in
descending order. Fuel saving
potential is indicated. A switched-
-------------------------------------------------------------------------------------------------------------------------------------------------------------
100
Instruments and controls
off consumer disappears from
the list and the consumption
value will be updated.
During sporadic driving
conditions, the heated rear
window is activated automatically
to increase engine load. In this
event, the heated rear window is
indicated as one of the top
consumers, without activation by
the driver.
● Economy Trend: Displays the
average consumption
development over a distance of
50 km. Filled segments display
the consumption in 5 km steps
and shows the effect of
topography or driving behaviour
on fuel consumption.
Graphic-Info-Display,
Colour-Info-Display
Depending on the vehicle
configuration the vehicle has a
Graphic-Info-Display or a Colour-
Info-Display.
The Info-Display is located in the
instrument panel above the
Infotainment system.
Graphic-Info-Display
Depending on the Infotainment
system, the Graphic-Info-Display is
available in two versions.
Graphic-Info-Display indicates:
● time 3 81
● outside temperature 3 81
● date 3 81
● electronic climate control settings
● Infotainment system, see
description in the Infotainment
manual
● settings for vehicle
personalisation 3 104
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
101
Colour-Info-Display
The Colour-Info-Display indicates in
colour:
● time 3 81
● outside temperature 3 81
● date 3 81
● electronic climate control settings
● rear view camera 3 172
● Infotainment system, see
description in the Infotainment
manual
● navigation, see description in the
Infotainment manual
● system settings
● vehicle messages 3 102
● settings for vehicle
personalisation 3 104
The type of information and how it is
displayed depends on the equipment
of the vehicle and the settings made.
Selecting menus and settings
Menus and settings are accessed via
the display.
Press CONFIG: Menu page Settings
is displayed.
Turn multifunction knob to:
● Select a setting or value.
● Display a menu option.
Press multifunction knob to:
● Confirm a setting or value.
● Select or activate the marked
option.
● Switch a system function on/off.
Press BACK to:
● Exit a menu or setting without
changing.
● Return from a submenu to a
higher menu level.
● Delete the last character in a
character sequence. Press and
hold BACK for a few seconds to
delete the entire entry.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст