Opel Frontera UBS. Service manual — part 974
REAR SUSPENSION; COIL SPRING 3D – 1
SECTION 3D
REAR SUSPENSION;
COIL SPRING
CONTENTS
PAGE
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . 3D – 2
On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . . . . . .. 3D – 3
Coil Spring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3D – 3
Shock Absorber . . . . . . . . . . . . . . . . . . . . . . . . . . .. 3D – 6
Trailing Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3D – 8
Center Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 3D – 10
Lateral Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 3D – 12
Stabilizer Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 3D – 15
3D – 2 REAR SUSPENSION; COIL SPRING
GENERAL DESCRIPTION
Stabilizer Bar
Center Link
Shock Absorber
Trailing Link
Lateral Rod
The rear suspension is a 4-link, coil spring type
suspension with a stabilizer, consisting of two
trailing links, center link, lateral rod, shock
absorber, and stabilizer. In this suspension, the
links are specially arranged to enable the rear axle
to move freely, thereby expanding suspension
stroke, reducing friction, and improving lateral
rigidity and roll control. All these result in
improved stability, riding comfort, and rough road
maneuverability.
Each link connects the axle housing with the frame
through a rubber bushing. The axle housing is
supported by the trailing links and center link
longitudinally and by the lateral rod latitudinally.
C03RW003
REAR SUSPENSION; COIL SPRING 3D – 3
ON-VEHICLE SERVICE
COIL SPRING
5
2
4
5
3
1
1
Removal Steps
1.
Parking brake cable bracket
2.
Stabilizer bar
3.
Shock absorber
4.
Insulator
5.
Coil spring
Installation Steps
5.
Coil spring
4.
Insulator
3.
Shock absorber
2.
Stabilizer bar
1.
Parking brake cable bracket
460RW024
3D – 4 REAR SUSPENSION; COIL SPRING
INSTALLATION
5. Coil Spring
Make sure that the coil spring is installed in the proper
position.
REMOVAL
Preparation:
1)
Raise the vehicle and support the frame with suitable
safety stands.
2)
Support the rear axle case with a jack.
1. Parking Brake Cable Bracket
Remove the parking brake cable from the trailing link.
2. Stabilizer Bar
Disconnect the stabilizer bar at the stabilizer link.
3. Shock Absorber
Remove the shock absorber from the axle case.
4. Insulator
5. Coil Spring
Remove the insulator and coil spring while lowering
the rear axle case.
CAUTION:
Be sure not to let the brake hose, parking brake cable,
and breather hose extend to their full length.
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
•
Coil spring
•
Insulator
Fit the end of the coil spring to the coil spring seat and
mount the coil spring on the rear axle case.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст