Opel Frontera UBS. Service manual — part 2560
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–103
248RY00010
247RY00004
247RY00005
247RY00006
16. Second coast brake band
Remove the second coast brake band from the case.
17. Front planetary ring gear
Remove the front planetary ring gear from the case.
18. Bearing and race
Remove the bearing and race.
19. Race
Remove the race.
7A–104
AUTOMATIC TRANSMISSION (AW30-40LE)
248RY00011
247RY00007
248RY00012
248RY00013
20. Snap ring
Using snap ring pliers, remove the snap ring.
21. Front planetary gear
Remove the front planetary gear from the case.
22. Drum and one-way clutch
Remove sun gear input drum and one-way clutch.
Check pack clearance of second brake
Using a feeler gauge, measure the clearance between the
snap ring and flange as shown in the figure.
If the values are nonstandard, replace the discs.
mm (in.)
Clearance
0.62–1.98
(0.0244–0.0780)
AUTOMATIC TRANSMISSION (AW30-40LE)
7A–105
248RY00014
248RY00015
248RY00016
248RY00017
23. Snap ring
Using two screwdrivers, remove the snap ring.
24. Flange, plate and disc
Remove the flange, five discs and five plates.
Check pack clearance of first and reverse brake
Using a feeler gauge, measure the clearance between the
plate and second brake drum as shown in the figure.
If the values are nonstandard, select another flange.
25. Snap ring
Using snap ring pliers, remove the snap ring.
mm (in.)
Clearance
0.7–1.0
(0.0276–0.0394)
Available flange sizes
mm (in.)
4.0 (0.158)
4.8 (0.189)
4.2 (0.165)
5.0 (0.197)
4.4 (0.173)
5.2 (0.205)
4.6 (0.181)
5.4 (0.213)
7A–106
AUTOMATIC TRANSMISSION (AW30-40LE)
247RY00009
248RY00018
26. Rear planetary gear, second brake drum and output
shaft
Remove the rear planetary gear, second brake drum and
output shaft as an assembly.
27. Bearing
Remove the assembled thrust bearing and race from the
case.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст