Opel Frontera UBS. Service manual — part 968
3C – 4 FRONT SUSPENSION
INSTALLATION
5. Rubber Bushing and Washer
4. Shock Absorber
3. Rubber Bushing and Washer
2. Nut
Shock Absorber Nut Torque
N·m (kg·m/lb·ft)
20 (2.0 / 14)
1. Bolt, Nut and Washer
Shock Absorber Nut Torque
N·m (kg·m/lb·ft)
82 (8.4 / 61)
FRONT SUSPENSION 3C – 5
STABILIZER BAR
Removal Steps
1.
Nut and washer
2.
Link
3.
Bracket
4.
Stabilizer bar
5.
Rubber bushing
Installation Steps
5.
Rubber bushing
4.
Stabilizer bar
3.
Bracket
2.
Link
1.
Nut and washer
REMOVAL
Preparation:
1)
Raise the vehicle and support the frame with suitable
safety stands.
2)
Remove the stone guard.
3)
Remove wheel and tire assembly. Refer to “Wheels
and Tires” in section 3E.
1. Nut and Washer
CAUTION:
Be careful not to break the ball joint boot.
2. Link
3. Bracket
4. Stabilizer Bar
5. Rubber Bushing
3C – 6 FRONT SUSPENSION
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
•
Stabilizer bar
•
Rubber bushing
•
Link ball joint
INSTALLATION
5. Rubber Bushing
4. Stabilizer Bar
3. Bracket
Bracket Nut Torque
N·m (kg·m/lb·ft)
22 (2.2 / 16)
2. Link
1. Nut and Washer
Link Nut Torque
N·m (kg·m/lb·ft)
50 (5.1 / 37)
FRONT SUSPENSION 3C – 7
TORSION BAR
Removal Steps
1.
Adjust bolt, end piece and seat
2.
Height control arm
3.
Torsion bar
Installation Steps
3.
Torsion bar
2.
Height control arm
1.
Adjust bolt, end piece and seat
REMOVAL
Preparation:
Raise the vehicle and support the frame with suitable
safety stands.
1. Adjust Bolt, End Piece and Seat
Apply the setting marks to the adjust bolt and end
piece.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст