Opel Meriva (2017 year). Instruction — part 7
102
Instruments and controls
Selecting menus and functions
The menus and functions can be
selected via the buttons on the turn
signal lever.
Press MENU to switch between the
menus or to return from a submenu to
the next higher menu level.
Turn the adjuster wheel to highlight a
menu option or to set a numeric value.
Press SET/CLR to select a function or
to confirm a message.
Vehicle Information Menu
Press MENU to select the Vehicle
Information Menu, or on Uplevel-
Combi-Display select X.
Turn the adjuster wheel to select a
submenu. Press SET/CLR to confirm.
Follow the instructions given in the
submenus.
Possible submenus can be,
depending on the version:
● Unit: Displayed units can be
changed.
On vehicles with Midlevel-
Display following settings can be
selected:
● Unit1: Great Britain
● Unit2: United States
● Unit3: Europe
● Tyre Pressure System: Checks
tyre pressure of all wheels during
driving 3 198.
● Tyre Load: Select tyre pressure
category according to the
actually inflated tyre pressure
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
103
● Remaining Oil Life: Indicates
when to change the engine oil
and filter 3 91.
● Speed Warning: If exceeding the
preset speed, a warning chime
will be activated.
● Language: Displayed language
can be changed if the vehicle is
not equipped with a radio.
Selection and indication can be
different between Midlevel-, Uplevel-,
and Uplevel-Combi-Display.
Trip/Fuel Information Menu
Press MENU to select the Trip/Fuel
Information Menu, or select W on
Uplevel-Combi-Display.
Turn the adjuster wheel to select a
submenu. Press SET/CLR to confirm.
● trip odometer 1
● trip odometer 2
● digital speed
Trip odometer 2 and digital speed are
only available on vehicles with
Uplevel-Display or Uplevel-Combi-
Display.
Reset trip odometer by pressing
SET/CLR on the turn signal lever for
a few seconds or by pressing the
reset knob between speedometer
and Driver Information Centre with
the ignition on.
On vehicles with trip computer more
submenus are available.
Selection and indication can be
different between Midlevel-, Uplevel-,
and Uplevel-Combi-Display.
Trip/Fuel Information Menu, Trip
Computer 3 109.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
104
Instruments and controls
Graphic-Info-Display,
Colour-Info-Display
Depending on the vehicle
configuration the vehicle has a
● Graphic-Info-Display
or
● Colour-Info-Display
The Info-Display is located in the
instrument panel above the
Infotainment system.
Graphic-Info-Display
Depending on the Infotainment
system, the Graphic-Info-Display is
available in two versions.
Graphic-Info-Display indicates:
● time 3 86
● outside temperature 3 85
● date 3 86
● electronic climate control settings
● Infotainment system, see
description for Infotainment
system in the Infotainment
instruction
● settings for vehicle
personalisation 3 112
Colour-Info-Display
The Colour-Info-Display indicates in
colour:
● time 3 86
● outside temperature 3 85
● date 3 86
● electronic climate control settings
● rear view camera 3 158
● Infotainment system, see
description for Infotainment
system in the Infotainment
instruction
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
105
● navigation, see description for
Infotainment system in the
Infotainment instruction
● system settings
● vehicle messages 3 106
● settings for vehicle
personalisation 3 112
The type of information and how it is
displayed depends on the equipment
of the vehicle and the settings made.
Selecting menus and settings
Menus and settings are accessed via
the display.
Selections are made via:
● menus
● function buttons and
multifunction knob of the
Infotainment system
Selecting with the Infotainment
system
Select a function via the Infotainment
system buttons. The menu of the
selected function is displayed.
The multifunction knob is used to
select an item and to confirm.
Multifunction knob
The multifunction knob is the central
control element for the menus:
Turn
● to mark a menu option
● to set a numeric value or to
display a menu option
Press (the outer ring)
● to select or activate the marked
option
● to confirm a set value
● to switch a system function on/off
BACK
Press BACK to:
● exit a menu without changing
settings
● return from a submenu to a
higher menu level
● delete the last character in a
character sequence
Press and hold BACK for a few
seconds to delete the entire entry.
Vehicle personalisation 3 112,
-------------------------------------------------------------------------------------------------------------------------------------------------------------
106
Instruments and controls
Vehicle messages
Messages are indicated mainly in the
Driver Information Centre, in some
cases together with a warning and
signal buzzer.
Press SET/CLR, MENU or turn the
adjuster wheel to confirm a message.
Vehicle messages on the
Midlevel-Display
The vehicle messages are displayed
as code numbers.
No. Vehicle message
2
No radio remote control
detected, depress clutch pedal
for a restart
3
Engine coolant level low
4
Air conditioning off
5
Steering wheel is locked
No. Vehicle message
6
Depress brake pedal to release
electrical parking brake
7
Turn steering wheel, switch
ignition off and then on
9
Turn steering wheel, start
engine again
12 Vehicle overloaded
13 Compressor overheated
15 Centre high-mounted brake
light failure
16 Brake light failure
17 Headlight levelling malfunction
18 Left low beam failure
19 Rear fog light failure
20 Right low beam failure
21 Left sidelight failure
22 Right sidelight failure
23 Reversing light failure
24 Number plate light failure
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
107
No. Vehicle message
25 Left front turn signal failure
26 Left rear turn signal failure
27 Right front turn signal failure
28 Right rear turn signal failure
29 Check trailer brake light
30 Check trailer reversing light
31 Check left trailer turn signal
32 Check right trailer turn signal
33 Check trailer rear fog light
34 Check trailer rear light
35 Replace battery in radio remote
control
48 Clean side blind zone alert
system
53 Tighten gas cap
54 Water in diesel fuel filter
55 Diesel particle filter is full
No. Vehicle message
56 Tyre pressure imbalance on
front axle
57 Tyre pressure imbalance on
rear axle
58 Tyres without TPMS sensors
detected
59 Open and then close driver
window
60 Open and then close front
passenger window
61 Open and then close rear left
window
62 Open and then close rear right
window
65 Theft attempted
66 Service theft alarm system
67 Service steering wheel lock
68 Service power steering
69 Service suspension system
70 Service level control system
No. Vehicle message
71 Service rear axle
74 Service AFL
75 Service air conditioning
76 Service side blind zone alert
system
79 Top up engine oil
81 Service transmission
82 Change engine oil soon
83 Service adaptive cruise control
84 Engine power is reduced
89 Service vehicle soon
94 Shift to park before exiting
95 Service airbag
128 Bonnet open
134 Park assist fault, clean bumper
136 Service parking assist
-------------------------------------------------------------------------------------------------------------------------------------------------------------
108
Instruments and controls
No. Vehicle message
174 Low vehicle battery
258 Park assist off
Vehicle messages on the
Uplevel-Display or
Uplevel-Combi-Display
The vehicle messages are displayed
as text. Follow the instructions given
in the messages.
The system displays messages
regarding the following topics:
● fluid levels
● anti-theft alarm system
● brakes
● drive systems
● ride control systems
● cruise control
● object detection systems
● lighting, bulb replacement
● wiper/washer system
● doors, windows
● radio remote control
● seat belts
● airbag systems
● engine and transmission
● tyre pressure
● diesel particle filter
Vehicle messages on the
Colour-Info-Display
Some important messages appear
additionally in the
Colour-Info-Display. Press the
multifunction knob to confirm a
message. Some messages only pop-
up for a few seconds.
Warning chimes
Only one warning chime will sound at
a time.
The warning chime regarding
unfastened seat belts has priority
over any other warning chime.
When starting the engine or whilst
driving
● If seat belt is not fastened.
● If a door or the tailgate is not fully
closed when starting-off.
● If a certain speed is exceeded
with parking brake applied.
● If a programmed speed is
exceeded.
● If a warning message or a
warning code appears in the
Driver Information Centre.
● If the parking assist detects an
object.
● If reverse gear is engaged and
the rear end carrier is extended.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
109
● If a fault in the automatic locking
system is detected.
● If the diesel particle filter has
reached the maximum filling
level.
When the vehicle is parked and/or
the driver's door is opened
● With exterior lights on.
During an Autostop
● If the driver's door is opened.
Battery voltage
When the vehicle battery voltage is
running low, a warning message or
warning code 174 will appear in the
Driver Information Centre.
1. Switch off immediately any
electrical consumers which are
not required for a safe ride, e.g.
seat heating, heated rear window
or other main consumers.
2. Charge the vehicle battery by
driving continuously for a while or
by using a charging device.
The warning message or warning
code will disappear after the engine
has been started twice consecutively
without a voltage drop.
If the vehicle battery cannot be
recharged, have the cause of the fault
remedied by a workshop.
Trip computer
The menus and functions can be
selected via the buttons on the turn
signal lever 3 101.
Press MENU to select the Trip/Fuel
Information Menu, or select W on
the Uplevel-Combi-Display.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
110
Instruments and controls
Trip/Fuel Information Menu on
Uplevel-Display
Turn the adjuster wheel to select one
of the submenus:
● trip odometer 1
● trip odometer 2
● range
● average consumption
● instantaneous consumption
● average speed
● digital speed
Trip/Fuel Information Menu on
Uplevel-Combi-Display
Turn the adjuster wheel to select a
page:
Page 1:
● trip odometer 1
● average consumption 1
● average speed 1
Page 2:
● trip odometer 2
● average consumption 2
● average speed 2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
111
Page 3:
● digital speed
● range
● instantaneous consumption
Trip computer 1 and 2
The information of two trip computers
can be reset separately for odometer,
average consumption and average
speed by pressing SET/CLR, making
it possible to display different trip
information for different drivers.
Trip odometer
Trip odometer displays the recorded
distance since a certain reset.
Trip odometer counts up to a distance
of 2,000 km and then restarts at 0.
Reset trip odometer by pressing
SET/CLR on the turn signal lever for
a few seconds or, on vehicles with
reset knob, by pressing the reset
knob near the speedometer
separately for selected page 1 or 2.
Fuel range
Range is calculated from current fuel
tank level and current consumption.
The display shows average values.
After refuelling, the range is updated
automatically after a brief delay.
When the fuel level in the tank is low,
a message appears in the display.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
112
Instruments and controls
When the tank has to be refuelled
immediately, a warning message is
displayed.
Additionally the control indicator i in
the fuel gauge illuminates or flashes
Fuel range LPG version
Display of approximate fuel range
available with the remaining fuel in
each respective fuel tank of gasoline
and LPG fuel, along with a total range
of both fuel types together. Switch
between the mode by pressing
SET/CLR.
Average consumption
Display of average consumption. The
measurement can be reset at any
time and starts with a default value.
To reset, press SET/CLR for a few
seconds separately for selected page
1 or 2.
On vehicles with LPG engines:
Average consumption is indicated for
the currently selected mode; LPG or
Gasoline.
Instantaneous consumption
Displays the instantaneous
consumption.
On vehicles with LPG engines:
Instantaneous consumption is
indicated for the currently selected
mode; LPG or Gasoline.
Average speed
Display of average speed. The
measurement can be reset at any
time.
To reset, press SET/CLR for a few
seconds separately for selected page
1 or 2.
Digital speed
Digital display of the instantaneous
speed.
Vehicle personalisation
The vehicle's behaviour can be
personalised by changing the settings
in the Info-Display.
Some of the personal settings for
different drivers can be memorised
individually for each vehicle key.
Memorised settings 3 22.
Depending on vehicle equipment and
country-specific regulations some of
the functions described below might
not be available.
Some functions are only displayed or
active when the engine is running.
Personal settings in the
Graphic-Info-Display
CD 300/CD 400/CD 400plus
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
113
Press CONFIG. The menu Settings is
displayed.
The following settings can be
selected by turning and pressing the
multifunction knob:
● Languages
● Time Date
● Radio settings
● Phone settings
● Vehicle settings
In the corresponding submenus the
following settings can be changed:
Languages
Selection of the desired language.
Time Date
See Clock 3 86.
Radio settings
See description for Infotainment
system in the Infotainment instruction.
Phone settings
See description for Infotainment
system in the Infotainment instruction.
Vehicle settings
● Climate and air quality
Auto fan speed: Modifies the
level of the cabin airflow of the
climate control in automatic
mode.
Climate control mode: Controls
the state of the cooling
compressor when the vehicle is
started. Last setting
(recommended) or at vehicle
start either always ON or always
OFF.
Auto rear demist: Activates
automatically rear heated
window.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
114
Instruments and controls
● Comfort settings
Chime volume: Changes the
volume of warning chimes.
Personalization by driver:
Activates or deactivates the
personalisation function.
Rear auto wipe in reverse:
Activates or deactivates
automatic switching on of the
rear window wiper when reverse
gear is engaged.
● Park assist / Collision detection
Park assist: Activates or
deactivates the ultrasonic
parking assist.
● Exterior ambient lighting
Duration upon exit of vehicle:
Activates or deactivates and
changes the duration of exit
lighting.
Exterior lighting by unlocking:
Activates or deactivates the
welcome lighting.
● Remote locking, unlocking,
starting
Remote door unlock: Changes
the configuration to unlock only
the driver's door or the whole
vehicle whilst unlocking.
● Restore factory settings
Restore factory settings: Resets
all settings to the default settings.
Settings in the Colour-Info-
Display
CD 600/Navi 650/Navi 950
Press CONFIG on the Infotainment
system faceplate to enter the
Configuration Settings menu.
Turn the multifunction knob to scroll
upwards or downwards in the list.
Press the multifunction knob
(Navi 950 / Navi 650: press the outer
ring) to select a menu item.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
115
● Languages
● Time and Date
● Radio Settings
● Phone Settings
● Navigation Settings
● Display Settings
● Vehicle Settings
In the corresponding submenus the
following settings can be changed:
Languages
Selection of the desired language.
Time and Date
See Infotainment instruction for further
information.
Radio Settings
See Infotainment instruction for further
information.
Phone Settings
See Infotainment instruction for further
information.
Navigation Settings
See Infotainment instruction for further
information.
Display Settings
● Home Page Menu:
See Infotainment instruction for
further information.
● Rear Camera Options:
Press to adjust the rear camera
● Display Off:
See Infotainment instruction for
further information.
● Map Settings:
See Infotainment instruction for
further information.
Vehicle Settings
● Climate and Air Quality
Auto Fan Speed: Modifies the fan
regulation. Changed setting will
be active after switching the
ignition off and on again.
Air Conditioning Mode: Activates
or deactivates cooling when
switching on the ignition or uses
the last chosen setting.
Auto Demist: Activates or
deactivates auto demist.
Auto Rear Demist: Activates
automatically the rear heated
window.
● Comfort and Convenience
Chime Volume: Changes the
volume of warning chimes.
Personalisation by Driver:
Activates or deactivates the
personalisation function.
Auto Reverse Gear Wiper:
Activates or deactivates
automatically switching on of the
rear window wiper when reverse
gear is engaged.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
116
Instruments and controls
● Collision Detection Systems
Park Assist: Activates or
deactivates the ultrasonic
sensors.
● Lighting
Vehicle Locator Lights: Activates
or deactivates the entry lighting.
Exit Lighting: Activates or
deactivates and changes the
duration of exit lighting.
● Remote Lock/Unlock/Start
Remote Door Unlock: Changes
the configuration to unlock only
the driver's door or the whole
vehicle whilst unlocking.
● Return to Factory Settings?:
Resets all settings to the default
settings.
OnStar
OnStar is a personal connectivity and
service assistant with integrated
Wi-Fi hotspot. The OnStar service is
available 24 hours a day, seven days
a week.
Note
OnStar is not available for all
markets. For further information,
contact your workshop.
Note
In order to be available and
operational, OnStar needs a valid
OnStar subscription, functioning
vehicle electrics, mobile service and
GPS satellite link.
To activate the OnStar services and
set up an account, press Z and speak
with an advisor.
Depending on the equipment of the
vehicle, the following services are
available:
● Emergency services and support
in the case of a vehicle
breakdown
● Wi-Fi hotspot
● Smartphone application
● Remote control, e.g. location of
the vehicle, activation of horn and
lights
● Stolen vehicle assistance
● Vehicle diagnostics
● Destination download
Note
The OnStar module of the vehicle is
deactivated after ten days without an
ignition cycle. Functions requiring a
data connection will be available
again after switching on the ignition.
OnStar buttons
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Instruments and controls
117
Privacy button
Press and hold j until a message is
heard to activate or deactivate the
transmission of the vehicle location.
Press j to answer a call or to end a
call to an advisor.
Press j to access the Wi-Fi settings.
Service button
Press Z to establish a connection to
an advisor.
SOS button
Press [ to establish a priority
emergency connection to a specially
trained emergency advisor.
Status LED
Green: The system is ready.
Green flashing: The system is on a
call.
Red: A problem arose.
Off: System is in standby mode.
Red / green flashing for a short period
of time: Transmission of the vehicle
location has been deactivated.
OnStar services
General services
If you need any information
concerning e.g. opening hours, points
of interest and destinations or if you
need any support e.g. in the case of a
vehicle breakdown, a flat tyre and
empty fuel tank, press Z to establish
a connection to an advisor.
Emergency services
In the case of an emergency situation,
press [ and talk to an advisor. The
advisor then contacts emergency or
assistance service providers and
directs them to your vehicle.
In the case of an accident with
activation of airbags or belt
tensioners, an automatic emergency
call is established. The advisor is
immediately connected to your
vehicle to see whether help is
needed.
Wi-Fi hotspot
The Wi-Fi hotspot of the vehicle
provides internet connectivity with a
maximum speed of 4G/LTE.
Note
The Wi-Fi hotspot functionality is not
available for all markets.
Up to seven devices may be
connected.
To connect a mobile device with the
Wi-Fi hotspot:
1. Press j and then select Wi-Fi
settings on the Info-Display. The
settings displayed include the Wi-
Fi hotspot name (SSID),
password and connection type.
2. Start a Wi-Fi network search on
your mobile device.
3. Select your vehicle hotspot
(SSID) when listed.
4. When prompted, enter the
password on your mobile device.
Note
To change the SSID or password,
press Z and talk to an advisor or log
in to your account.
To switch off the Wi-Fi hotspot
functionality, press Z to call an
advisor.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст