Subaru Legacy (2020 year). Instruction — part 14

(191,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

Inside warning

chime

Outside warning

chime

Operation indica-

tor on push-button

ignition switch

Status

Action

Ding, ding ...
(intermittent)

—

—

The driver’s door is opened while the push-
button ignition switch is “ACC” and the select
lever is in the “P” position.

Switch the push-button ignition switch to
“OFF”, or close the driver’s door.
When exiting the vehicle, be sure to switch
the push-button ignition switch to “OFF”.

The push-button ignition switch is switched
to “OFF” while the driver’s door is open.

Close the driver’s door.

Ding

Short beep

(2 seconds)

—

Lockout warning:
The doors are locked by following methods
when an access key fob is left in the car.
.

The door is closed when the lock lever of
the door is in the lock position.

.

The door is closed when the power door
locking switch is in the lock position.

Take out the access key fob from the vehicle,
and lock the doors.
The doors cannot be locked while the access
key fob is inside the vehicle.
A chirp sound will be heard, and all doors will
be unlocked.

—

Short beep

(2 seconds)

—

Access key lock-in warning:
The door lock sensor is touched while the
push-button ignition switch is “OFF” and the
access key fob is inside the vehicle.

Take out the access key fob from the vehicle,
and lock the doors.
If the access key fob is inside the vehicle, the
doors cannot be locked.

—

Beep, beep,

beep, beep,

beep (5 times)

—

Door ajar warning:
The door lock sensor is touched while the
ignition switch is in the “OFF” position and
one of the doors including the rear gate is
opened.

Close the doors securely and lock them.
If one of the doors including the rear gate is
opened, the doors cannot be locked.

Ding

Long beep (60
seconds max.)

—

Power warning:
The door lock sensor is touched while you
are carrying the access key fob, the push-
button ignition switch is in a position other
than “OFF” and the select lever is in the “P”
position.

Return the access key fob inside the vehicle,
or switch the push-button ignition switch to
“OFF”.
If the push-button ignition switch is not
switched to “OFF”, the doors cannot be
locked.

Ding, ding ...

(7 seconds)

—

—

Access key warning:
The vehicle is driven while the access key fob
is not inside the vehicle.

Carry the access key fob, and drive the
vehicle.

– CONTINUED –

Warning and Indicator Lights

189

3

Instruments

and

Controls

(192,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

Inside warning

chime

Outside warning

chime

Operation indica-

tor on push-button

ignition switch

Status

Action

Ding

—

—

Access key warning for engine start:
The push-button ignition switch is pressed
while the access key fob is not inside the
vehicle.

Carry the access key fob, and press the
push-button ignition switch.

Ding

Beep, beep,

beep (3 times)

—

Access key takeout warning:
The driver exits the vehicle with the access
key fob and closes the driver’s door while the
push-button ignition switch is in a position
other than “OFF” and the select lever is in the
“P” position.

Switch the push-button ignition switch to
“OFF”, and get out of the vehicle.

Ding

Beep, beep,

beep (3 times)

—

Passenger access key takeout warning:
A fellow passenger exits the vehicle with the
access key fob and closes a door other than
the driver’s door while the push-button
ignition switch is in a position other than
“OFF”.

Return the access key fob to inside the
vehicle, or switch the push-button ignition
switch to “OFF”.

Long beep

(continuous)

Long beep

(continuous)

—

Access key takeout without “P” position
warning:
The driver exits the vehicle with the access
key fob and closes the driver’s door while the
push-button ignition switch is in a position
other than “OFF” and the select lever is in a
position other than the “P” position.

Shift the select lever to the “P” position,
switch the push-button ignition switch to
“OFF” and exit the vehicle.

Long beep

(continuous)

—

—

Select lever position warning:
.

Case 1: The engine is turned off by
pressing the push-button ignition switch
while the select lever is in a position other
than the “P” position.

.

Case 2: The driver’s door is opened
while the push-button ignition switch is in
a position other than “OFF” and the
select lever is in a position other than the
“P” position.

.

Case 1: Start the engine, shift the select
lever to the “P” position, switch the push-
button ignition switch to “OFF” and exit
the vehicle.

.

Case 2: Shift the select lever to the “P”
position, switch the push-button ignition
switch to “OFF” and exit the vehicle.

Warning and Indicator Lights

190

(193,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

Inside warning

chime

Outside warning

chime

Operation indica-

tor on push-button

ignition switch

Status

Action

Ding

—

—

The battery of the access key fob is low.

Replace the battery of the access key fob.

Ding

—

Flashes in green

(15 seconds max.)

Steering lock warning:
The engine start procedure is performed, but
the steering is still locked.

While turning the steering wheel right and left
lightly, depress the brake pedal and press the
push-button ignition switch.

Ding

—

Flashes in orange

System malfunction warning:
A malfunction is detected in the power
system or steering lock.

Contact a SUBARU dealer immediately and
have the vehicle inspected.

– CONTINUED –

Warning and Indicator Lights

191

3

Instruments

and

Controls

(194,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

&

Security Indicator Light

This indicator light shows the status of the
alarm system. It also indicates operation of
the immobilizer system.

!

Alarm system

It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to “Alarm System”
FP140.

!

Immobilizer system

The security indicator light starts blinking
in the following conditions.

For models with “keyless access with
push-button start system”:
.

Immediately after the push-button igni-

tion switch is turned to the “OFF” position.
.

Immediately after the driver’s door is

opened or closed when all of the following
conditions are met.

– The push-button ignition switch is in
the “ON” or “ACC” position.
– The engine is not running.

In the event that an unauthorized key is
used (for example, the key is unregistered
or the ID code does not match), the power
is not switched to “ON” and the security
indicator light continues blinking.

For models without “keyless access
with push-button start system”:
.

Approximately 60 seconds after the

ignition switch is turned from the “ON”
position to the “ACC” or “LOCK” position.
.

Immediately after the key is pulled out.

If the indicator light does not blink in the
above conditions, it may indicate that
immobilizer system may be malfunction-
ing. Contact your nearest SUBARU dealer
immediately.

In the event that an unauthorized key (for
example, an unauthorized duplicate) is
used, the security indicator light illumi-
nates. For details about the immobilizer
system, refer to “Immobilizer” FP130.

NOTE

.

The security indicator light remains

off in the following conditions. It means
that the matching of the ID code is
completed and the immobilizer system
is deactivated, and it does not indicate
a malfunction.

Models with “keyless access with
push-button start system”:

– while the engine is running
– the push-button ignition switch
has been turned to the “ON” or
“ACC” position and the driver’s

door has not been opened or closed

Models without “keyless access
with push-button start system”:

– while the engine is running
– for approximately 60 seconds
after the ignition switch is turned
from the “ON” position to the “ACC”
or “LOCK” position
– when the ignition switch is in the
“ON” position.

.

Even if a malfunction occurs, such

as the security indicator light flashes
irregularly, it will not affect the func-
tionality of the immobilizer system.

Warning and Indicator Lights

192

(195,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

&

SI-DRIVE Indicator Light (If
Equipped)

SI-DRIVE indicator light
1)

Intelligent (I) mode

2)

Sport Sharp (S#) mode

This light indicates the current SI-DRIVE
mode.
For details of SI-DRIVE mode, refer to “SI-
DRIVE” FP342.

&

Select Lever/Gear Position
Indicator

1)

Upshift indicator

2)

Downshift indicator

3)

Select lever/gear position indicator

The select lever position is displayed on
the indicator.

!

Upshift/downshift indicator

When the instruction mode is selected, the
gear position indicator (which shows the
current gear selection) and the available
upshift/downshift indicator light up. Refer
to “Selection of Instruction Mode” FP340.

&

Turn Signal Indicator
Lights

These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing Bulbs” FP508.

&

High Beam Indicator
Light

This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
operating the headlight flasher.

&

High Beam Assist Indi-
cator

This indicator appears when the high
beam assist function is activated. For
details about the high beam assist func-
tion, refer to “High Beam Assist Function”
FP244.

– CONTINUED –

Warning and Indicator Lights

193

3

Instruments

and

Controls

(196,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

&

Automatic Headlight
Beam Leveler Warning
Light (If Equipped)

This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the “ON”
position, have your vehicle inspected at
your SUBARU dealer.

&

LED Headlight Warning
Light

This light illuminates if the LED headlights
malfunction. Have your vehicle inspected
at a SUBARU dealer as soon as possible.

&

Steering Responsive
Headlight OFF Indicator
Light (If Equipped)

This light illuminates when the Steering
Responsive Headlight function is off. For
details about the on/off setting, refer to
“Car settings” FP215.

&

Steering Responsive
Headlight Warning
Light (If Equipped)

The light flashes when a malfunction
occurs in the Steering Responsive Head-
light. Refer to “Steering Responsive Head-
light (SRH)” FP248.

&

Headlight Indicator
Light

This indicator light illuminates under the
following conditions.
.

When the light switch is turned to the

“

” or “

” position

.

When the light switch is in the “AUTO”

position and the headlights illuminate
automatically

&

Front Fog Light Indica-
tor Light (If Equipped)

This indicator light illuminates while the
front fog lights are illuminated.

&

Auto Start Stop Warn-
ing Light (Yellow)

CAUTION

.

If the Auto Start Stop warning

light is illuminated in yellow,

there may be a malfunction in the
Auto Start Stop system. When
starting the engine again after the
Auto Start Stop warning light
illuminates, if it is still illuminat-
ing, have your vehicle inspected
at a SUBARU dealer as soon as
possible.

The Auto Start Stop warning light will
illuminate in yellow if you open the engine
hood when the engine has been tempora-
rily stopped by the Auto Start Stop system.
In this case, to ensure safety, the engine
will not be automatically restarted, even if
you release the brake pedal. Use normal
operation to restart the engine.

&

Auto Start Stop OFF
Indicator Light

This light will illuminate when “Auto Start
Stop” is touched to prevent the Auto Start
Stop system from operating. It will turn off
when “Auto Start Stop” is touched once
more to enable operation of the Auto Start
Stop system. For details about the setting,
refer to “Car settings” FP215 (11.6-inch
display models) or “Setting of the upper
display” FP228 (dual 7.0-inch display
models).

Warning and Indicator Lights

194

(197,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

CAUTION

If the Auto Start Stop OFF indicator
light does not illuminate when “Auto
Start Stop” is touched, contact a
SUBARU dealer for an inspection as
soon as possible.

&

Auto Start Stop Indica-
tor Light (Green)

This indicator light illuminates when the
engine has been temporarily stopped by
the Auto Start Stop system. It will turn off
when the engine is restarted.

&

Auto Start Stop No
Activity Detected Indi-
cator Light

When a vehicle is stopped, the indicator
light illuminates when the operating con-
dition of idling stop are not meet. The light
will turn off when the vehicle starts driving.
Refer to “Non-operational conditions”
FP363.

&

X-MODE Indicator (Outback)

X-MODE indicator (models with 1 mode)
1)

X-MODE indicator

X-MODE indicator (models with 2 modes)
1)

DEEP SNOW/MUD mode indicator

2)

SNOW/DIRT mode indicator

This indicator appears while the X-MODE
is activated. It will disappear when the X-
MODE is deactivated. Refer to “To Acti-
vate/Deactivate the X-MODE” FP351.

&

Hill Descent Control
Indicator (Outback)

This indicator appears while the hill des-
cent control function is in standby. It will
flash while the hill descent control function
is operating. It will disappear when the hill
descent control function is not available.

&

BSD/RCTA Warning In-
dicator (If Equipped)

This warning indicator appears on the
combination meter display (color LCD)
when the BSD (Blind Spot Detection) or
RCTA (Rear Cross Traffic Alert) is not
functioning for any reason. For further
details, refer to “BSD/RCTA Warning In-
dicator” FP380. If this indicator remains
displayed, have your vehicle inspected by
your SUBARU dealer as soon as possible.

&

BSD/RCTA OFF Indica-
tor (If Equipped)

This indicator appears on the combination
meter display (color LCD) when “BSD/
RCTA” is touched to deactivate the BSD
(Blind Spot Detection) and RCTA (Rear

– CONTINUED –

Warning and Indicator Lights

195

3

Instruments

and

Controls

(198,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

Cross Traffic Alert), or when the BSD/
RCTA is suspended temporarily. For de-
tails, refer to “BSD/RCTA OFF Indicator”
FP379.

&

Icy Road Surface
Warning Indicator

When the outside temperature is 378F
(38C) or less, the icy road surface warning
indicator will illuminate to inform the driver
that the road surface may be frozen.

NOTE

.

The outside temperature indicator

shows the temperature in the area
around the sensor. Therefore, the tem-
perature indication may differ from the
actual outside air temperature.
.

The icy road surface warning indi-

cator should be treated only as a guide.
Be sure to check the condition of the
road surface before driving.
.

Once the icy road surface warning

indicator appears, it will not disappear
unless the outside temperature has
increased to 418F (58C) or higher.

&

RAB Warning Indi-
cator (If Equipped)

This indicator illuminates if the Reverse
Automatic Braking System malfunctions.

Refer to “Reverse Automatic Braking
System” FP383.

&

RAB OFF Indicator (If
Equipped)

This indicator illuminates when the Re-
verse Automatic Braking System is turned
OFF, or when the Reverse Automatic
Braking System is suspended temporarily.
Refer to “Reverse Automatic Braking
System” FP383.

&

Driver Monitoring Sys-
tem Operation Indicator
Light (Green) (If
Equipped)

This indicator illuminates when the Driver
Monitoring System is activated. Refer to
“Driver Monitoring System operation in-
dicator light (green)” FP402.

&

Driver Monitoring Sys-
tem Warning Light (Yel-
low) (If Equipped)

This warning light illuminates if the Driver
Monitoring System malfunctions. Have
your vehicle inspected at a SUBARU
dealer as soon as possible. Refer to
“Driver Monitoring System operation in-
dicator light (green)” FP402.

&

Driver Monitoring Sys-
tem OFF Indicator Light
(If Equipped)

This indicator illuminates when “Driver
Monitoring System” is touched to deacti-
vate the Driver Monitoring System. Refer
to the “Driver Monitoring System OFF
indicator light” FP402.

&

Driver Monitoring Sys-
tem Temporary Stop In-
dicator Light (If
Equipped)

This indicator illuminates when the Driver
Monitoring System is temporarily stopped.
Refer to “Driver Monitoring System tem-
porary stop indicator light” FP402.

NOTE

The Driver Monitoring System stops
temporarily in the following circum-
stances.
.

The temperature of the Driver Mon-

itoring System unit is high.

Warning and Indicator Lights

196

(199,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

&

Sonar Audible Alarm
OFF Indicator (If
Equipped)

This indicator illuminates when the sonar
audible alarm is turned OFF. For the
setting procedure, refer to “Car settings”
FP215.

3-7. Combination Meter Dis-
play (Color LCD)

WARNING

Always pay adequate attention to
safe driving when operating the
combination meter display (color
LCD) while the vehicle is in motion.
When operation of the combination
meter display (color LCD) interferes
with your ability to concentrate on
driving, stop the vehicle before
performing operations on the
screen. Also, do not concentrate on
the display while driving. Doing so
may cause you to look away from the
road and could result in an accident.

Various information will be shown on the
combination meter display (color LCD).
Also, a warning message will appear on
the display if a malfunction. is detected. In
addition, several settings for the displayed
content can be performed.

Combination meter display (color LCD)
1)

Meter information screen (Refer to “Me-
ter Information Screen” FP199.)

2)

Warning screen (Refer to “Warning
Screen” FP199.)/Basic screen (Refer to
“Basic Screens” FP201.)

3)

EyeSight screen*

4)

Digital speed screen (Refer to “Digital

– CONTINUED –

Combination Meter Display (Color LCD)

197

3

Instruments

and

Controls

(200,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

Speed Screen” FP204.)

5)

Telltale screen (Refer to “Telltale Screen”
FP200.)

6)

Select lever/gear position indicator (Re-
fer to “Select Lever/Gear Position Indi-
cator” FP193.)

7)

X-MODE indicator (Outback) (Refer to
“X-MODE Indicator (Outback)” FP195.)
SI-DRIVE indicator (if equipped) (Refer
to “SI-DRIVE Indicator Light” FP193.)

8)

O d o m e t e r ( R e f e r t o “ O d o m e t e r ”
FP171.)/Double trip meter (Refer to
“Double Trip Meter” FP172.)

*: For details, refer to the separate EyeSight

Owner’s Instruction.

&

Basic Operation

Control switches
1)
2)
3)

By operating

or

of the control

switches, the screens can be changed.

If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.

The warning screen will return to the
original screen after a few seconds. While
the

information reminder is shown on

the display, it may be possible to display

the warning screen again. To recall the
message marked with

on the display,

pull the

switch on the steering wheel

toward you.

&

Welcome Screen (Opening
Animation) and Good-Bye
(Ending Animation) Screen

When the driver’s door is opened and
closed after unlocking the door, the wel-
come screen (opening animation) will
appear on the combination meter display
(color LCD) for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display (color LCD) gradually turns
off by showing good-bye screen (ending
animation).

NOTE

.

The welcome screen and the good-

bye screen may differ in the actual
words and appearance.
.

The basic screen will be shown

when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
.

Once the welcome screen appears, it

takes a certain period of time to display
it again.
.

If the ignition switch is operated

after unlocking the driver’s door, the

Combination Meter Display (Color LCD)

198

(201,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

welcome screen will not appear even
when the driver’s door is opened and
closed.
.

The welcome screen will disappear

when you lock the driver’s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
.

The welcome screen including the

audio/navigation unit can be set to on
or off.
.

The welcome screen can be set to on

or off. For details, refer to “General
settings” FP211 (11.6-inch display
models) or “General settings” FP228
(dual 7.0-inch display models).
.

The good-bye screen can be set to

on or off. For details, refer to “General
settings” FP211 (11.6-inch display
models) or “General settings” FP228
(dual 7.0-inch display models).

&

Warning Screen

Example of warning

If there is a warning message or a
maintenance notification, it will appear on
combination meter display (color LCD).
Take the appropriate actions based on the
messages indicated.

&

Meter Information Screen

The meter information screen can be
changed. For details, refer to “General
settings” FP211 (11.6-inch display mod-
els) or “General settings” FP228 (dual
7.0-inch display models).

!

ECO gauge

The ECO gauge shows the difference
between the average rate of fuel con-
sumption since the trip meter was last
reset and the current rate of fuel consump-
tion.

The ECO gauge indicates the current fuel
efficiency as shown in the following chart.

Displayed unit

Needle position

“+” side

“−” side

MPG

Better

Poorer

l/100km

Poorer

Better

– CONTINUED –

Combination Meter Display (Color LCD)

199

3

Instruments

and

Controls

(202,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

NOTE

.

The ECO gauge shows only an

approximate indication.
.

After resetting the trip meter, the

average rate of fuel consumption is not
shown until driving 0.6 mile (1 km). Until
that time, the ECO gauge does not
operate.

!

Clock and temperature

This screen displays the clock and outside
temperature.
For details about clock setting, refer to
“Clock” FP239.

!

Compass (if equipped)

The direction of the vehicle is displayed.

!

Driving range on remaining fuel

NOTE

The driving range on the remaining fuel

is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.

&

Telltale Screen

1)

Telltale screen

When the corresponding situation occurs,
the following telltales will be displayed on
the telltale screen.

NOTE

.

When there is warning information

to display, it will be displayed in five
warning indicators, starting on the left
in ascending order of severity.
.

If there are 6 or more warning

Combination Meter Display (Color LCD)

200

(203,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

messages to display, the indicators will
be displayed in sequential order.

Mark

Name

Page

Door open indicator
light

185

Engine hood open
warning light

185

LED headlight warning
light

194

High beam assist indi-
cator light

193

Steering Responsive
Headlight OFF indicator
light (if equipped)

194

Steering Responsive
Headlight warning light
(if equipped)

194

Engine low oil level
warning light

179

RAB warning light (if
equipped)

196

RAB OFF indicator (if
equipped)

196

BSD/RCTA warning
light (if equipped)

195

Mark

Name

Page

BSD/RCTA OFF indi-
cator light (if equipped)

195

Auto Start Stop warning
light (yellow)

194

Auto Start Stop OFF
indicator light

194

Auto Start Stop indica-
tor light (green)

195

Auto Start Stop No Ac-
tivity Detected indicator
light

195

Automatic headlight
beam leveler warning
light (if equipped)

194

Windshield washer fluid
warning light

185

Hill descent control in-
dicator light (Outback)

195

Driver Monitoring Sys-
tem operation indicator
light (green) (if
equipped)

196

Driver Monitoring Sys-
tem warning light (yel-
low) (if equipped)

196

Driver Monitoring Sys-
tem OFF indicator light
(if equipped)

196

Mark

Name

Page

Driver Monitoring Sys-
tem temporary stop in-
dicator light (if
equipped)

196

Icy road surface warn-
ing light

196

&

Basic Screens

By operating the

or

switch on the

steering wheel, you can change the screen
that is always displayed.

Average fuel consumption screen:

AVG: Average fuel consumption

: Driving range on remaining fuel

This screen displays the average rate of
fuel consumption since the trip meter was
last reset.

– CONTINUED –

Combination Meter Display (Color LCD)

201

3

Instruments

and

Controls

(204,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

NOTE

The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.

Current fuel consumption screen:

: Current fuel consumption
: Driving range on remaining fuel

NOTE

The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.

Driving information screen:

: Journey time
: Journey distance

This screen displays the journey time (the
time that has elapsed since the ignition
switch was turned to the “ON” position)
and journey distance (the distance that
has been driven since the ignition switch
was turned to the “ON” position).

Auto Start Stop screen:

: The total amount of time that the engine

was stopped by means of the Auto Start
Stop system

: The total amount of fuel saved due to the

engine being stopped by the Auto Start
Stop system

The indicated values are calculated from
the most recent reset of the currently
displayed trip meter to the current time.
The indication ranges are as follows.
.

Total amount of time: from 00’00@ to

9999h59’59@

.

Total amount of fuel saved: from 0 gal to

9999.999 gal

NOTE

.

When the trip meter is reset, the

corresponding accumulated time and
the amount of fuel saving are also reset.

Combination Meter Display (Color LCD)

202

(205,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

.

The time spent with the engine

stopped by means of the Auto Start
Stop system is also added to the
journey time.

TPMS screen (U.S.-spec. models):

This screen displays each tire pressure.
When a tire is deflated, the deflated tire
and the tire pressure will be displayed on
the screen in yellow.

NOTE

.

The tire pressure values are dis-

played several minutes after driving.
.

Once the tire pressure monitoring

system detects the low tire pressure,
the tire pressure values will display in
yellow until the system detects the
normal tire pressure.

.

Immediately adjust the tire pressure

when the warning light illuminates.
When the tire pressure monitoring
system detects the adjusted tire pres-
sure, the warning light will turn off and
the tire pressure values will turn to
white.

Compass screen (if equipped):

The direction of the vehicle is displayed.

Navigation screen (if equipped):

When the route guidance is set in the
navigation system, this item shows the
navigation route information. For details
about the navigation system, refer to the
separate navigation/audio Owner’s Man-
ual.

– CONTINUED –

Combination Meter Display (Color LCD)

203

3

Instruments

and

Controls

(206,1)

北米Model "A2570BE-A" EDITED: 2019/ 5/ 24

Audio screen:

The audio screen shows the status of
audio information. For details about the
audio system, refer to the separate navi-
gation/audio Owner’s Manual.

Clock and outside temperature screen:

This screen displays the clock and outside
temperature.
For details about clock setting, refer to
“Clock” FP239.

&

Digital Speed Screen

1)

Speed limit indicator (if equipped)

2)

Vehicle speed

This screen displays the current vehicle
speed.

Combination Meter Display (Color LCD)

204