Chevrolet Silverado / GMC Sierra. Service manual — part 1388

Fig. 229: View Of Vent Hose & Connector
Courtesy of GENERAL MOTORS CORP.

8. If servicing the 8.25 inch axle, install the vent hose (1) to the vent connector (2).

Tighten: Tighten the vent hose connector (2) to 20 N.m (15 lb ft).

2008 Chevrolet Silverado 1500

2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 230: Install New Axle Shaft Seal Using J 45225 & J 8092 - Front Drive Axle
Courtesy of GENERAL MOTORS CORP.

9. Install the new left side axle shaft seal using the J 45225 (1) and the J 8092 (2). See

Special Tools.

10. Install the new left side inner axle shaft retainer ring.

2008 Chevrolet Silverado 1500

2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 231: View Of Left Side Inner Axle Shaft
Courtesy of GENERAL MOTORS CORP.

11. Install the left side inner axle shaft by doing the following:

1. Install the left side inner shaft into the differential carrier assembly until the inner shaft

is seated against the differential side gear.

2. While holding the inner shaft against the differential side gear, turn the inner shaft in

order to align the splines of the inner shaft with the splines on the differential side
gear.

3. Drive the inner shaft into the differential case side gear using a soft-faced mallet until

the retaining ring on the inner shaft is fully seated within the groove in the differential
case side gear.

12. Pull back on the inner shaft to ensure that the inner shaft is properly retained in the

differential case side gear.

2008 Chevrolet Silverado 1500

2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 232: Installing Side Bearing Using J 36609 & J 8092 - Front Drive Axle
Courtesy of GENERAL MOTORS CORP.

13. Install the right side inner shaft bearing into the inner shaft housing by performing the

following steps:

1. Install the inner axle shaft housing into a vise.

IMPORTANT: Clamp only on the mounting flange of the inner axle

shaft housing.

2008 Chevrolet Silverado 1500

2008 Driveline/Axle Front Drive Axle - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Была ли эта страница вам полезна?
Да!Нет
4 посетителя считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности