Chevrolet Silverado / GMC Sierra. Service manual — part 425

Fig. 30: View Of Engine Mount To Engine Mount Frame Bracket
Courtesy of GENERAL MOTORS CORP.

9. Install the 3 bolts holding the engine mount to the engine mount frame bracket.

Tighten: Tighten the engine mount to engine mount frame bracket bolts to 65 N.m (48 lb
ft).

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 31: Identifying Engine Shield And Retaining Bolts
Courtesy of GENERAL MOTORS CORP.

10. Install the engine protection shield and bolts.

Tighten: Tighten the engine protection shield bolts to 20 N.m (15 lb ft).

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 32: Identifying Oil Pan Skid Plate
Courtesy of GENERAL MOTORS CORP.

11. Install the oil pan skid plate.

Tighten: Tighten the bolts to 20 N.m (15 lb ft).

12. Remove the wheelhouse inner panel. Refer to Front Wheelhouse Liner Replacement -

Left Side (Chevrolet) or Front Wheelhouse Liner Replacement - Left Side (GMC) .

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

13. Lower the vehicle.

ENGINE MOUNT REPLACEMENT - RIGHT SIDE

Removal Procedure

Fig. 33: View Of Wheelhouse Panel & Push-In Retainers
Courtesy of GENERAL MOTORS CORP.

1. Remove the starter motor. Refer to Starter Motor Replacement (6.6L) .

2. If RWD vehicle, raise the vehicle to a height to work through the front wheelhouse opening.

Refer to Lifting and Jacking the Vehicle .

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 6.6L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado