Chevrolet Silverado / GMC Sierra. Service manual — part 249
Fig. 49: View Of Top Engine Cover
Courtesy of GENERAL MOTORS CORP.
1. Loosen the intake manifold sight shield bolt.
2. Remove the sight shield from the sight shield retainer.
3. Remove the sight shield retainer bolts and the retainer, if required.
2008 Hummer H2
2008 ENGINE Engine Mechanical - 6.2L - H2
Installation Procedure
1. Install the sight shield retainer and the bolts, if required.
Tighten: Tighten the retainer bolts to 5 N.m (44 lb in).
NOTE:
Refer to Fastener Notice .
2008 Hummer H2
2008 ENGINE Engine Mechanical - 6.2L - H2
Fig. 50: View Of Top Engine Cover
Courtesy of GENERAL MOTORS CORP.
NOTE:
Use care when installing the engine sight shield to avoid
contacting the manifold absolute pressure (MAP) sensor wire
harness connector. Loss of engine performance or engine
2008 Hummer H2
2008 ENGINE Engine Mechanical - 6.2L - H2
2. Install the intake manifold sight shield to the retainer.
Tighten: Tighten the bolt to 10 N.m (89 lb in).
POSITIVE CRANKCASE VENTILATION HOSE/PIPE/TUBE REPLACEMENT
Removal Procedure
damage may result.
2008 Hummer H2
2008 ENGINE Engine Mechanical - 6.2L - H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст