Chevrolet Silverado / GMC Sierra. Service manual — part 2461

COAT HOOK REPLACEMENT

Fig. 18: View Of Coathook Assembly, Cover & Screw
Courtesy of GENERAL MOTORS CORP.

SUNSHADE REPLACEMENT

Callout

Component Name

1

Coat Hook Assembly Cover

2

Coat Hook Screw (Qty: 1)

Tighten: 9 N.m (80 lb in)

NOTE:

Refer to Fastener Notice .

3

Coat Hook Assembly
Tip: Pull hook downward to access cover and fastener.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 19: View Of Sunshade
Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

1

Sunshade Bracket Cover

2

Windshield Side Garnish Molding Screw (Qty: 3)

Tighten: 6 N.m (53 lb in)

NOTE:

Refer to Fastener Notice .

3

Sunshade Assembly
Tip: Disconnect electrical connectors.

4

Sunshade Bracket

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

SUNSHADE ANCHOR REPLACEMENT

Fig. 20: Identifying Sunshade Anchor
Courtesy of GENERAL MOTORS CORP.

WINDSHIELD PILLAR GARNISH MOLDING REPLACEMENT

Callout

Component Name

1

Sunshade Anchor Screw

Tighten: 3 N.m (25 lb in)

NOTE:

Refer to Fastener Notice .

2

Sunshade Anchor Assembly
Tip: Pull the cover downward to access the fastener.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 21: View Of Windshield Pillar Garnish Molding
Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

Preliminary Procedures

1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .

2. Remove the front assist handle, passenger side only. Refer to Front Assist Handle Replacement.

1

Windshield Side Garnish Molding Cover

2

Windshield Side Garnish Molding Screw

Tighten: 2 N.m (18 lb in)

NOTE:

Refer to Fastener Notice .

3

Windshield Side Garnish Molding Assembly

Procedure

1. Tabs must be installed prior to retainers.

2. Tabs to be fully seated in I/P trim panel retainer and valance panel.

3. Disconnect electrical connectors.

4

Windshield Side Garnish Molding Retainer (Qty: 2)

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado