Chevrolet Silverado / GMC Sierra. Service manual — part 1808

Fig. 60: View Of Turbocharger Exhaust Pipe Bracket Bolt
Courtesy of GENERAL MOTORS CORP.

9. Remove the turbocharger exhaust pipe to bracket bolt (1).

10. Remove the turbocharger exhaust pipe.

Installation Procedure

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Exhaust - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 61: View Of Turbocharger Exhaust Pipe Bracket Bolt
Courtesy of GENERAL MOTORS CORP.

1. Install the turbocharger exhaust pipe into the clamp and position the pipe flat against the

turbocharger.

2. Loosely install the turbocharger exhaust pipe to bracket bolt (1).

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Exhaust - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 62: View Of Turbocharger Exhaust Pipe Heat Shield & Bolts
Courtesy of GENERAL MOTORS CORP.

3. Position the turbocharger exhaust pipe heat shield and install the heat shield bolts.

Tighten: Tighten the bolts to 10 N.m (89 lb ft).

NOTE:

Refer to Fastener Notice .

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Exhaust - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado

Fig. 63: View Of Fill Tube To Bellhousing Nuts
Courtesy of GENERAL MOTORS CORP.

4. Position the transmission fluid fill tube.

5. Install the transmission fluid fill tube to bellhousing nuts.

Tighten: Tighten the nuts to 18 N.m (13 lb ft).

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Exhaust - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado