Chevrolet Silverado / GMC Sierra. Service manual — part 1633
Fig. 78: Identifying Fan Shroud Mounting Brackets & Bolts
Courtesy of GENERAL MOTORS CORP.
9. Fully tighten the 3 engine cooling fan shroud bolts (1).
Tighten: Tighten the bolts to 8 N.m (71 lb in).
10. Install the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement
(Mechanical) or Engine Coolant Fan Upper Shroud Replacement (Automatic
Transmission - Diesel).
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
COOLING FAN PULLEY REPLACEMENT
Removal Procedure
Fig. 79: View Of Camshaft Position Sensor Electrical Connector
Courtesy of GENERAL MOTORS CORP.
1. Remove the drive belt. Refer to Drive Belt Replacement .
2. Remove the fan clutch. Refer to Fan Clutch Replacement (Diesel).
3. Disconnect the camshaft position (CMP) sensor electrical connector.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 80: View Of Cooling Fan Pulley
Courtesy of GENERAL MOTORS CORP.
4. Remove the fan pulley bolts/nuts.
5. Remove the fan pulley.
Installation Procedure
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 81: View Of Cooling Fan Pulley
Courtesy of GENERAL MOTORS CORP.
1. Install the fan pulley.
2. Install the fan pulley bolts/nuts.
Tighten: Tighten the bolts/nuts to 41 N.m (30 lb ft).
NOTE:
Refer to Fastener Notice .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Cooling - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст