Chevrolet Silverado / GMC Sierra. Service manual — part 1705
Tighten: Tighten the nut to 5 N.m (44 lb in).
4. Close the hood.
BATTERY NEGATIVE CABLE DISCONNECTION AND CONNECTION (W/AUXILIARY
BATTERY)
Disconnect Procedure
CAUTION: Refer to Battery Disconnect Caution .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 7: View Of Battery Cable Components
Courtesy of GENERAL MOTORS CORP.
1. Turn off all the lamps and accessories.
2. Turn the ignition OFF.
3. Open the hood.
4. Loosen the primary negative battery cable nut (6).
5. Remove the primary negative battery cable from the battery negative post.
6. Reposition the primary battery cable away from the battery.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 8: View Of Battery & Battery Cable Fasteners
Courtesy of GENERAL MOTORS CORP.
7. Open the auxiliary battery negative cable post cover.
8. Loosen the auxiliary battery negative cable nut (3).
9. Remove the auxiliary negative battery cable from the battery negative post.
10. Reposition the auxiliary negative battery cable away from the battery.
Connect Procedure
CAUTION: Refer to Battery Disconnect Caution .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 9: View Of Battery & Battery Cable Fasteners
Courtesy of GENERAL MOTORS CORP.
1. Install the auxiliary negative battery cable onto the battery negative post.
2. Tighten the auxiliary negative battery cable nut (1).
Tighten: Tighten the nut to 7.5 N.m (66 lb in).
IMPORTANT: Clean any existing corrosion from the battery terminal and the
battery cable end.
NOTE:
Refer to Fastener Notice .
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Electrical - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст