Chevrolet Silverado / GMC Sierra. Service manual — part 1145
Fig. 447: Identifying Pump Cover Bolts
Courtesy of GENERAL MOTORS CORP.
1. Place the oil pump cover onto the oil pump body and put stator shaft through a hole in the
bench.
2. Install the pump cover bolts (233) finger tight only.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Fig. 448: Identifying Pump Cover Bolts
Courtesy of GENERAL MOTORS CORP.
3. Install the J 21368 . See Special Tools.
4. Tighten the pump cover bolts (233).
Tighten: Tighten the bolts to 24 N.m (18 lb ft).
NOTE:
Refer to Fastener Notice .
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
5. Remove the J 21368 . See Special Tools.
INPUT SPEED SENSOR INSTALLATION
Fig. 449: View Of Input Speed Sensor (ISS) Assembly
Courtesy of GENERAL MOTORS CORP.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
1. Inspect the input speed sensor (ISS) assembly (250) for the following conditions:
Cracked or damaged housing
Worn, broken or missing harness brackets; replace the ISS assembly if necessary
Damaged or worn wining or electrical connector
Loose, missing or damaged mounting bolt insert
Fig. 450: Identifying Input Speed Sensor (ISS) O-Ring
Courtesy of GENERAL MOTORS CORP.
2. Remove the ISS O-ring (249) and discard.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст