Chevrolet Silverado / GMC Sierra. Service manual — part 1961
Fig. 219: Gasket Retaining Strap Locations
Courtesy of GENERAL MOTORS CORP.
6. Identify the 8 gasket retaining strap locations (1-8).
IMPORTANT: Remove only the outer gasket from the manifold. Do not
disassemble any of the internal components of the manifold
in an attempt to remove the 8 inner sealing gaskets. If the
inner gaskets are cut or damaged, replace the manifold as an
assembly. Only use a wire-cutter type tool in order to
minimize the amount of debris. Do not use a rotary-type
cutting tool on the retaining straps.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Fig. 220: Retaining Strap
Courtesy of GENERAL MOTORS CORP.
7. Using a cutter type tool, cut the 8 retaining straps.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Fig. 221: Identifying Valve Cover Outer Gasket
Courtesy of GENERAL MOTORS CORP.
8. Remove the outer gasket (1) from the valve lifter oil manifold.
Installation Procedure
IMPORTANT: All gasket surfaces should be free of oil or other foreign material
during assembly.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Fig. 222: Identifying Valve Cover Outer Gasket
Courtesy of GENERAL MOTORS CORP.
1. Place the service gasket (1) onto the valve lifter oil manifold.
2008 Chevrolet Silverado 1500
2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст