Chevrolet Silverado / GMC Sierra. Service manual — part 2071

Tighten: Tighten the bolts to 50 N.m (37 lb ft).

Fig. 153: View Of Power Steering Pump-To-Engine Block Bolt
Courtesy of GENERAL MOTORS CORP.

31. Install the rear power steering pump-to-engine block bolt (1500 series shown, 2500 series

similar).

Tighten: Tighten the bolt to 50 N.m (37 lb ft).

32. Raise the vehicle.

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 154: View Of Coolant Heater Cord
Courtesy of GENERAL MOTORS CORP.

33. Connect the coolant heater cord to the coolant heater, if equipped.

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 155: View Of Electrical Connectors & Clips
Courtesy of GENERAL MOTORS CORP.

34. Connect the engine harness electrical connector (1) to the CKP sensor.

35. Connect the engine harness electrical connector (2) to the knock sensor.

36. Connect the engine harness electrical connector (4) to the oil level sensor.

37. Install the engine harness clip (3) to the transmission oil cooler line bracket.

38. Install the starter motor. Refer to Starter Motor Replacement (4.3L) or Starter Motor

Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Starter Motor Replacement (6.6L) .

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 156: View Of Electrical Connectors
Courtesy of GENERAL MOTORS CORP.

39. Connect the engine harness electrical connector (1) to the A/C refrigerant pressure sensor.

2008 Chevrolet Silverado 1500

2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado