Chevrolet Silverado / GMC Sierra. Service manual — part 1087
Fig. 234: View Of J 8763-B
Courtesy of GENERAL MOTORS CORP.
1. Install the J 8763-B onto the transmission.
2. Install the J 8763-B into the base.
TORQUE CONVERTER ASSEMBLY REMOVAL
CAUTION: The torque converter weighs approximately 65 lbs. Personal
injury may result if you lift the torque converter improperly.
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Fig. 235: View Of Torque Converter
Courtesy of GENERAL MOTORS CORP.
Remove the torque converter.
DRAIN OIL
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Fig. 236: Draining Transmission Oil
Courtesy of GENERAL MOTORS CORP.
Rotate the transmission so that the converter housing is up. Allow the transmission fluid to drain
from the case extension.
CONVERTER HOUSING REMOVAL
Tools Required
J 41510 T-50 Plus Bit. See Special Tools.
Removal
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Fig. 237: View Of Converter Housing Bolts
Courtesy of GENERAL MOTORS CORP.
1. Remove the converter housing bolts (94). Use the J 41510 . See Special Tools.
2. Remove the converter housing (102).
2008 Chevrolet Silverado 1500
2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis
Silverado, Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст