Chevrolet Silverado / GMC Sierra. Service manual — part 2983

Fig. 57: View Of Rear Sliding Window Stops
Courtesy of GENERAL MOTORS CORP.

8. Install the rear sliding window stops (1) in place and fully seated.

9. Cycle the rear sliding window to the fully closed position.

10. Install the lower garnish molding. Refer to Rear Window Lower Garnish Molding

Replacement (Regular Cab) or Rear Window Lower Garnish Molding Replacement
(Ext Cab/Crew Cab w/A48) or Rear Window Lower Garnish Molding Replacement
(Ext Cab/Crew Cab w/o A48) .

11. Inspect the rear sliding window for proper operation.

12. Clean the window.

REAR WINDOW WEATHERSTRIP REPLACEMENT

Removal Procedure

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 58: View Of Rear Sliding Window Weatherstrip & Frame
Courtesy of GENERAL MOTORS CORP.

1. Remove the rear sliding center window. Refer to Rear Sliding Window Replacement.

2. Remove the rear sliding window weatherstrip (1) from the frame (2).

3. Clean around the edges the frame with a 50/50 mixture of isopropyl alcohol and water by

volume on a dampened lint free cloth. Remove all traces of the old weatherstrip.

Installation Procedure

IMPORTANT: If the window was broken remove all traces of broken glass

from the seats, floor and ducts.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

Fig. 59: Closeup View Of Weatherstrip
Courtesy of GENERAL MOTORS CORP.

1. Install the bottom and top of the weatherstrip (1). Perform the following:

1. Installing the weatherstrip (1), ensure that the single edge of the strip is located on the

top and bottom.

IMPORTANT: Install the bottom corners of the weatherstrip first to get the

best seal for water intrusion, then the top corners and sides.

IMPORTANT: Do Not remove the tape backing in this step.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado

2. Install both bottom corners and top corners must be fitted tightly into the frame before

pressing in place.

Fig. 60: View Of Rear Sliding Window Weatherstrip & Frame
Courtesy of GENERAL MOTORS CORP.

2. Install the weatherstrip (1) to the frame. Perform the following:

1. Installing the weatherstrip (1), ensure that the double edge of the weatherstrip is

located on each side.

2. Do one side at a time, remove the tape backing from the weatherstrip.

2008 Chevrolet Silverado 1500

2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,

Sierra & Silverado