Peugeot 407 C Dag (2008 year). Manual — part 10
02
132
GENERAL MENU
MAP:
orientation, details, display.
AUDIO FUNCTIONS: radio,
CD, Jukebox, options.
For maintenance of the
display, the use of a
soft, non-abrasive cloth
(spectacles cloth) is
recommended without any
additional product.
TELEMATIC: telephone,
directory, SMS.
CONFIGURATION:
vehicle, display, time,
languages, voice, auxiliary
socket (AUX) parameters.
VIDEO:
activation, parameters.
VEHICLE DIAGNOSTICS:
warnings log.
AIR CONDITIONING:
on/off and dual zone control
(according to equipment).
NAVIGATION GUIDANCE:
GPS, stages, options.
TRAFFIC INFORMATION:
TMC information, messages.
1
1
22
33
55
77
44
66
88
133
SELECTING A DESTINATION
Tip: for a detailed global view of the menus available, refer to the "Display fl ow charts"
part of this WIP Com section.
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
Turn the dial and select the
DESTINATION CHOICE function.
Press the dial to confi rm the selection.
Press the dial to confi rm the selection.
Turn the dial and select the ENTER
AN ADDRESS function.
When the country has been selected,
turn the dial and select the TOWN
function.
TOWN
ENTER AN ADDRESS
DESTINATION CHOICE
GPS
9
11
11
12
12
13
13
15
15
10
10
14
14
134
Press the dial to confi rm the selection.
Turn the dial and select the letters of
the town one by one confi rming each
time by pressing the dial.
Turn the dial and select OK.
Press the dial to confi rm the selection.
To speed up the process, the POST CODE can be
entered instead of the name of the town.
Use the alphanumeric keypad to enter the letters and
digits and "C" to correct.
Press the dial to confi rm the selection.
Select OK on the ENTER AN
ADDRESS page.
Repeat steps 8 to 12 for the ROAD and N° functions.
OK
OK
Select the STORE function to record the address entered in a
directory record and press the dial to confi rm the selection.
The points of interest (POI) indicate all of the service locations in the
vicinity (hotels, various businesses, airports, ...).
STORE
PARIS
POI
1
1
22
33
44
55
66
77
88
03
135
GUIDANCE OPTIONS
GPS
The route chosen by the WIP Com audio and telematics system depends
directly on the guidance options.
Changing these options may completely change the route.
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
Turn the dial and select the
GUIDANCE OPTIONS function.
Turn the dial and select the DEFINE
CALCULATION CRITERIA function.
Press the dial to confi rm the selection.
Press the dial to confi rm the selection.
GUIDANCE OPTIONS
DISTANCE/TIME
DEFINE CALCULATION CRITERIA
Turn the dial and select, for example,
the DISTANCE/TIME function.
99
10
10
11
11
12
12
1
1
22
33
44
55
136
Turn the dial and select the TRAFFIC
INFO function if it is not ticked.
Press the dial to confi rm the selection.
Select OK and press the dial to
confi rm.
TRAFFIC INFO
Press the dial to confi rm the selection.
Tick this box for optimum operation of the traffi c information,
diversions will be suggested.
OK
GUIDANCE SPEECH SYNTHESIS
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
GUIDANCE OPTIONS
Turn the dial and select the
GUIDANCE OPTIONS function.
Press the dial to confi rm the selection.
6
88
1
1
22
33
44
77
03
137
Press the MENU button.
Turn the dial and select the MAP
function.
Press the dial to confi rm the selection.
Turn the dial and select the MAP
DETAILS function.
Permits selection of the services
which can be seen on the map
(hotels, restaurants...).
ACTIONS ON THE MAP
MAP DETAILS
During the announcements, the volume of each
speech synthesis function (guidance, traffi c
information...) can be adjusted directly.
GUIDANCE SPEECH
SYNTHESIS
Select the ADJUST SPEECH
SYNTHESIS function and press the
dial to confi rm.
GPS
ADJUST SPEECH SYNTHESIS
DEACTIVATE
Select the DEACTIVATE function and
press the dial to confi rm.
OK
Select OK and press the dial to
confi rm.
1
1
22
33
44
55
66
77
03
138
For improved visibility, beyond the scale of 10 km, the map automatically
switches to North Orientation.
Turn the dial and select the MAP
function.
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the
3D VIEW tab.
Select OK and press the dial
to confi rm.
Turn the dial and select the MAP
ORIENTATION function.
Press the dial to confi rm the selection.
3D VIEW
GPS
MAP ORIENTATION
3D VIEW
OK
1
1
22
33
44
55
66
77
03
139
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the MAP
function.
Turn the dial and select the MAP IN
WINDOW or FULL SCREEN
MAP tab.
Select OK and press the dial
to confi rm.
Press the dial to confi rm the selection.
Turn the dial and select the DISPLAY
MAP function.
DISPLAYING THE MAP IN A WINDOW OR
IN FULL SCREEN MODE
GPS
DISPLAY MAP
FULL SCREEN MAP
OK
MAP IN WINDOW
1
1
22
33
44
55
99
88
77
66
03
140
ADDING A STAGE
During guidance, press the MENU
button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to confi rm the selection.
Turn the dial and select the
JOURNEY LEGS AND ROUTE
function.
JOURNEY LEGS AND ROUTE
Select OK and press the dial to
confi rm the order of the stages.
When the new address has been
entered, select OK and press the dial
to confi rm.
Enter for example a new address.
Select the ADD A STAGE function
(9 stages maximum) and press the
dial to confi rm.
Press the dial to confi rm the selection.
The stage must be completed or deleted before the guidance can
continue to the next destination.
Otherwise, the WIP Com audio and telematics system will always
guide you back to the previous stage.
ENTER AN ADDRESS
ADD A STAGE
GPS
OK
OK
1
1
22
33
44
55
66
77
88
141
ACTIVATING THE FILTER ON THE ROUTE
We recommend a fi lter on the route and a fi lter around the vehicle of:
- 5 km or 10 km for a region with heavy traffi c,
- 20 km for a region with a normal level of traffi c,
- 100 km for long journeys (motorway).
Press the MENU button.
Turn the dial and select the TRAFFIC
INFORMATION function.
Press the dial to confi rm the selection.
FILTER TRAFFIC INFORMATION
Turn the dial and select the FILTER
TRAFFIC INFORMATION function.
Press the dial to confi rm the
selection.
GEOGRAPHIC FILTER
Select the GEOGRAPHIC FILTER
function and press the dial to confi rm.
Turn the dial and select the ON THE
ROUTE tab.
OK
TRAFFIC INFORMATION
Select OK and press the dial to
confi rm.
1
1
22
33
44
66
55
77
04
142
Turn the dial and select the
CONFIGURE MESSAGE
ANNOUNCEMENT function.
Select the READ MESSAGES tab.
The Traffi c Information Messages will
be read by the voice synthesiser.
Select the NEW MESSAGE
DISPLAY tab.
The traffi c information messages
are extended to the fi lters selected
(geographic...) and can also be
displayed when guidance is not
active.
Press the MENU button.
NEW MESSAGE DISPLAY
OK
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS
We recommend that you do not tick the NEW MESSAGE DISPLAY tab for
regions with heavy traffi c.
Turn the dial and select the TRAFFIC
INFORMATION function.
Press the dial to confi rm the selection.
Press the dial to confi rm the selection.
TRAFFIC INFORMATION
Select OK and press the dial to
confi rm.
READ MESSAGES
CONFIGURE MESSAGE ANNOUNCEMENT
1
22
33
44
1
1
22
33
44
05
143
AUDIO/VIDEO
RADIO
SELECTING A STATION
Press the SOURCE button several
times in succession and select the
RADIO.
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Briefl y press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out a
manual search of the radio stations.
Press the LIST button to display the
list of stations received locally
(60 maximum).
To update this list, press for more than
two seconds.
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does
not indicate any failure of the audio equipment.
RDS
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the FM BAND PREFERENCES
function then press OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue listening to the
same station by means of frequency following. However, in certain
conditions, this RDS station is not followed throughout the country
as radio stations do not cover 100 % of the territory. This explains
the loss of reception of the station during a journey.
FM BAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)
1
1
22
05
144
AUDIO/VIDEO
MP3 CD
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,
is an audio compression standard which permits the recording of
several tens of music fi les on a single disc.
In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
The audio equipment will only play audio fi les with the extension
".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type
of fi le (.wma, .mp4, m3u...) can be played.
It is advisable to restrict fi le names to 20 characters without using
special characters (e.g.: " " ? ; ù) to avoid any playing or displaying
problems.
PLAYING A CD OR AN MP3 COMPILATION
Insert circular compact discs only. Some anti-pirating
systems, on original discs or CDs copied using
a personal recorder, may generate malfunctions
regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the player,
play begins automatically.
If the player already contains a disc,
press the SOURCE button several
times in succession and select CD to
listen to it.
Press one of the buttons to select a
track on the CD.
Press the LIST button to display
the list of tracks on the CD or of the
directories of the MP3 compilation.
The playing and displaying of an MP3 compilation may depend on
the recording programme and/or the parameter settings used. We
recommend use of the ISO 9660 recording standard.
INFORMATION AND ADVICE
CD
22
33
1
1
55
66
44
145
COPY CD TO JUKEBOX
COMPLETE CD
CREATE ALBUM
OK
Select COPY CD TO JUKEBOX and
press the dial to confi rm.
Select COMPLETE CD to copy
the entire CD and press the dial to
confi rm.
Select CREATE ALBUM and press
the dial to confi rm.
The AUTO CREATION tab automatically copies the CD by default
into an album of the type "album n°...".
The audio or MP3 CD is copied onto the hard disc. Copying may
take approximately 20 minutes depending on the duration of the CD.
During this copying phase, it is not possible to listen to the albums
previously recorded on the hard disc or the CDs.
Select the letters one by one and select
OK to confi rm.
If it is not an MP3 CD, the Jukebox automatically compresses
the CD in MP3 format. The compression may take approximately
20 minutes depending on the duration of the CD. During this
compression phase, it is possible to listen to the CD or to albums
previously recorded on the hard disc.
A long press on the SOURCE button starts the copying of the CD.
When copying an MP3 CD, the Jukebox only retains the last album
level. It is not possible to copy fi les from the Jukebox to a CD.
The STOP THE CD COPY action does not delete the fi les which
have already been transferred onto the jukebox hard disc.
Select AUDIO FUNCTIONS and press
the dial to confi rm.
Insert a CD or an MP3 compilation
and press the MENU button.
JUKEBOX FUNCTION
COPYING A CD ONTO THE HARD DISC
66
77
55
22
33
44
1
1
146
JUKEBOX
RENAME
JUKEBOX MANAGEMENT
RENAMING AN ALBUM
Press the MENU button.
Select AUDIO FUNCTIONS and
press the dial to confi rm.
Select the JUKEBOX function and
press the dial to confi rm.
Select the JUKEBOX MANAGEMENT
function and press the dial to confi rm.
Select the album to be renamed and
press the dial to confi rm.
Select the RENAME tab and press the
dial to confi rm.
Turn the dial and select the letters of
the album title one by one confi rming
each time by pressing the dial.
Use the alphanumeric keypad to enter the letters of the album title
one by one.
JUKEBOX FUNCTION
88
22
33
147
DELETE
OK
LISTENING TO THE JUKEBOX
Press the SOURCE button several
times in succession and select the
JUKEBOX function.
Press the LIST button.
Turn the dial to select the fi les.
Press the ESC button to return to the fi rst fi le level.
JUKEBOX
Select OK and press the dial to
confi rm.
To rename the tracks of an album, follow the same procedure,
selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks.
Select the DELETE function to delete an album or a
track from the Jukebox.
JUKEBOX FUNCTION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст