Peugeot 107 (2012 year). Manual — part 7
02
95
RADIO
Press SRC/TEL repeatedly and select
the FM1, FM2 or AM waveband.
Press a button to listen to the
corresponding preset station.
Select the desired radio station and
confi rm by pressing "OK".
RADIO
Press LIST to display the list of stations
received in alphabetical order.
The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking (alternative
frequencies) mode. This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.
A long press on LIST builds or updates
the list of stations; audio reception is
cut momentarily.
Make a long press on one of the buttons
to preset the station being listened to.
The name of the station is displayed and
an audible signal confi rms the preset.
A press changes to the next or previous
letter (e.g. A, B, D, F, G, J, K, ...).
MANAGE THE LIST
PRESETTING AND SELECTING A STATION
When recalling a preset station, of the reception of the station is
poor, the radio will try to fi nd a frequency transmitting the same
programme and a message appears in the screen.
02
96
RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the country as radio stations do not cover
100 % of the territory. This explains the loss of reception of the
station during a journey.
RADIO
RDS
With source FM1 or FM2, press MENU
then select "Radio".
Select or deselect "RDS" to activate or
deactivate RDS then confi rm with "OK"
to save the setting.
ENTER A FREQUENCY MANUALLY
Press MENU , select "Radio" , then
select "Write freq." .
Press + or - to select the desired
frequency and confi rm with "OK".
02
97
RADIO
Radio text is information transmitted by the radio station related to
the current programme or song.
With the radio displayed on the screen,
press MENU then select "Radio".
Select or deselect "TXT" to activate or
deactivate the display of Radio Text.
DISPLAY RADIO TEXT
RECEIVING TA MESSAGES
The TA (Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffi c
report is transmitted, the current audio source (Radio, CD,
USB, ...) is interrupted automatically to play the TA message.
Normal playback of the audio source resumes at the end of the
transmission of the message.
Press MENU, select "Radio".
Select or deselect "TA" to activate
or deactivate the reception of traffi c
messages.
03
98
AUDIO
AUDIO CD
Insert 12 cm diameter circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a
personal recorder, may cause faults which are no refl ection on the
quality of the original player.
Without pressing the EJECT button, insert a CD in the player, play
begins automatically.
To play a disc which has already been
inserted, press the SRC/TEL button
several times until CD play is displayed.
Press one of the buttons to select a
track on the CD.
Press and hold one of the buttons for
fast forward or backward.
PLAYING A CD
03
99
AUDIO
CD, USB
INFORMATION AND ADVICE
On a single disc, the CD player can read up to 255 MP3 fi les spread
over 8 folder levels with a maximum of 192 folders. However, it is
recommended that this be kept to 2 levels so as to limit the time taken
to access and play the CD.
During play, the folder structure is not observed.
In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
Do not connect a hard disk or USB device other than audio players to
the USB port. This may cause damage to your installation.
The audio system will only play fi les with ".mp3", ".wma" and ".wav" on
a CD and can play fi les with ".ogg" extension only on USB.
A high compression rate can adversely affect sound quality.
The playlists accepted on CD, MP3, iPod and USB connection are
types ".m3u" and ".wpl".
The number of fi les recognised is limited to 5 000 in 500 folders on a
maximum of 8 levels.
03
VOL
MENU
SRC/
LIST
ESC
SEEK
+
_
MP3
100
CD, USB
AUDIO
PLAYING A COMPILATION
Insert an MP3 compilation in the CD player or
connect a memory stick to the USB port.
The system creates playlists (temporary memory) the creation time
for which can take from a few seconds to several minutes.
The playlists are updated every time the ignition is switched off or a
USB memory stick is connected.
Play starts automatically after a period which depends on the
capacity of the USB memory stick.
At a fi rst connection, the order suggested is by folder.
When connecting again, the order previously chosen is
retained.
To play a disc or memory stick which has
already been inserted, press SRC/TEL
several times in succession and select "CD"
or "USB".
Press one of the buttons to select the
next or previous track.
Press one of the buttons to select the
next or previous folder in the order
chosen.
Press and hold one of the buttons for
fast forwards or backwards.
03
101
Select a line in the list.
Jump a page.
Press MENU, select "Media" then
select or deselect "TA" to activate
or deactivate reception of traffi c
messages.
Up a level in the menu.
AUDIO
Return to the top level of the folder structure to select the type of
tracks.
-
By Folders (CD or USB): all folders containing audio fi les
recognised on the peripheral device, in alphabetical order without
following the folder structure.
-
By Artist (USB only): all of the artist names defi ned in the ID3
Tags, in alphabetical order.
-
By Genre (USB only): all of the genres defi ned in the ID3 Tags.
-
By Playlist (CD or USB): if playlists have been saved.
Press LIST to display the structure of
the folders in the compilation.
Select the play mode: "Normal" ,
"Random" , "Random all" or
"Repeat" .
03
102
AUDIO
APPLE
®
PLAYERS or MOBILE PLAYER
Do not connect a device to both the USB port and the JACK
socket at the same time.
Connect the portable device (MP3 player...) to the
USB port or the JACK socket using a suitable cable
(not supplied).
The Apple
®
player software must be updated regularly for the
®
best connection.
The playlists are those defi ned in the Apple
®
player.
* Check your player's manual.
The auxiliary input, USB or JACK, allows the connection of a
portable device (MP3 player...).
USB PORT OR JACK SOCKET (DEPENDING ON VERSION)
Management of the device is via the audio system controls;
refer to the "CD, USB" section.
The audio fi les on a Mass Storage portable player * can be
heard through the vehicle's speakers by connecting it to the
USB port or JACK socket (cable not supplied).
The Apple
®
player must be generation 3 or later.
®
03
103
AUDIO
STREAMING - PLAYING AUDIO FILES VIA BLUETOOTH
DEPENDING ON THE COMPATIBILITY OF THE PHONE
Connect the telephone: see the "USING THE
TELEPHONE" section.
Streaming allows music fi les on a telephone to be heard via the
vehicle's speakers.
The telephone must support the appropriate Bluetooth
®
profi les
(profi les A2DP / AVRCP).
Activate the streaming source by
pressing SRC/TEL . Control of playback
is via the audio system. The contextual
information can be displayed in the
screen.
In certain cases, playing of the audio fi les must be initiated from
the telephone.
The audio quality depends on the quality of the transmission from
the telephone.
04
104
USING THE TELEPHONE
PAIRING A TELEPHONE / FIRST CONNECTION
The services offered depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.
Consult your telephone's manual and your operator to fi nd out which services are available to you.
Activate the telephone's Bluetooth function and
ensure that it is set as visible to all (refer to the
telephone instructions).
Press MENU then select "Bluetooth".
A window is displayed with " Searching device".
Select the telephone to be paired from
the list and confi rm with "OK". Only
one telephone can be paired at a time.
Select " Search".
For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth mobile
telephone with the Bluetooth hands-free system of your audio system must be carried out with the vehicle stationary and the ignition on.
It is not possible to pair more that 5 telephones. Press MENU and
select "Bluetooth" . Select "BT management" . If 5 telephones are
already paired, select the telephone to be deleted by pressing "OK"
and select "Delete" (refer to "Managing connections").
Visit www.peugeot.co.uk for more information (compatibility, more help, ...).
04
105
USING THE TELEPHONE
A virtual keypad is displayed on the screen: choose
a 4 digit code then confi rm with OK .
A message is displayed on the screen of the
telephone: enter the same code and confi rm.
A message appears in the screen to confi rm the result of the
connection.
Pairing can also be initiated from the telephone by searching for
detected Bluetooth devices.
Accept the connection to the telephone.
If pairing fails, try again; the number of attempts is not limited.
The directory and the calls list can be accessed after the
synchronisation period (if the telephone is compatible).
Automatic connection must be confi gured in the telephone to allow
the connection each time the vehicle is started.
In some cases, the Bluetooth address of the telephone may appear
instead of the name of the telephone.
04
106
USING THE TELEPHONE
Press MENU then select "Bluetooth" .
Select "BT management" and confi rm. The list of
paired telephones is displayed.
Indicates connection of the audio profi le.
MANAGING CONNECTIONS
Select a telephone and confi rm "OK".
Indicates connection of the hands-free profi le.
Then select or deselect:
-
"Tel." : hands-free connection
-
"Audio" : play audio fi les
"OK" to confi rm the choice.
Select "Delete" to delete the
pairing.
04
107
USING THE TELEPHONE
Make along press on SRC/TEL to
display the calls list.
In the list of calls, select the number and choose
"Missed calls", "Dialed calls" or "Answered
calls".
Previous or next page in the calls list.
"OK" starts the call.
MAKING A CALL - RECENTLY CALLED NUMBERS *
Navigation in the calls list.
The calls list includes the calls sent from and by from the vehicle via
the connected telephone.
It is possible to make a call directly from the telephone; stop the
vehicle as a safety measure.
* Depending on the compatibility of the telephone.
For access to the calls list, it is also possible to press MENU, select
"Telephone" , then select "Call" , and fi nally select "Calls list".
04
108
USING THE TELEPHONE
Press MENU , select "Telephone".
Select Call then "Directory" .
An incoming call is announced by a ring and a superimposed display
in the screen.
Select the desired number and confi rm.
"OK" to start the call.
Press SRC/TEL or select "YES " to
accept the call,
or
select "NO" to reject the call.
MAKING A CALL -
FROM THE DIRECTORY
RECEIVING A CALL
A long press on ESC or on SRC/TEL
also rejects an incoming call.
04
109
USING THE TELEPHONE
HANG UP
In the contextual menu:
-
select "Combined mode" to
transfer the call to the telephone.
-
select "Combined mode" to
transfer the call to the vehicle.
In the contextual menu:
-
select " Micro OFF " to switch off the
microphone.
-
select " Micro OFF " to switch the
microphone on again.
In certain cases, the combined mode has to activated from the
telephone.
The Bluetooth connection will be restored automatically if the ignition
has been switched off, then on again (depending on the compatibility
of the telephone).
MANAGING CALLS
A long press on SRC/TEL also ends
the call.
In the contextual menu, select "Hang
up" to end the call.
SECRET - MUTE
(so that the caller cannot hear)
COMBINED MODE
(to leave the vehicle without ending the call)
05
110
Press to display the audio settings
menu.
Press to go to the next setting.
The settings available are:
- AMBIANCE:
BASS, TREBLE and LOUDNESS.
- BALANCE (left/right balance).
The AMBIANCE, TREBLE and BASS audio settings are different
and independent for each sound source.
AUDIO SETTINGS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст