Peugeot 306 Break (2002 year). Manual — part 4
73
YO U R 306 IN D ETA IL
EON system
This connects stations which are part of the same network. It enables broadcasting of traffic information or a PTY
programme from a station which is part of the same network as the station to which you are listening.
This service is available when you have selected the TA traffic information programme or the PTY function.
COMPACT DISC
Selecting the CD as source
After inserting a disc, with the printed surface upwards, the player starts automatically.
If a disc is already inserted, press the "K" button.
Ejecting a disc
Press button “A” to eject the disc from the player.
Selecting a track
Press button “G” to select the next track.
Press button “H” to return to the start of the current track or to select the previous track.
Accelerated play
Press the “MAN” button.
Keep button “G” or “H” pressed for forwards or backwards accelerated play.
Accelerated play stops as soon as you release the button.
Buttons “G” and “H” resume the “track selection” function when the “MAN” button is pressed again.
Shuffle (RDM)
When the CD is selected, keep the “K” button pressed for two seconds. The tracks will be played in random
sequence. Pressing the “K” button again for two seconds returns you to normal play.
74
YO U R 306 IN D ETA IL
CD MULTI-CHANGER
Selecting the CD multi-changer
Press the “L” button.
Selecting a disc
Press a button from “1” to “6” to select the corresponding disc.
Selecting a track
Press button “G” to select the next track.
Press button “H” to return to the start of the current track or to select the previous track.
Accelerated play
Press the “MAN” button.
Keep button “G” or “H” pressed for forwards or backwards accelerated play.
Accelerated play stops as soon as you release the button.
Buttons “G” and “H” resume the “track selection” function when the “MAN” button is pressed again.
Shuffle (RDM)
When the CD multi-changer is selected, keep the “L” button pressed for two seconds. The tracks will be played
in random sequence. Pressing the “L” button again for two seconds returns you to normal play.
75
YO U R 306 IN D ETA IL
CD CHANGER (Available as an accessory
C
B
A
To insert a disc into the changer:
- open sliding panel A,
- press button B to eject the cartridge C,
C
D
- open one of the six compartments of the cartridge by pulling tab D,
- insert the disc with the printed face upwards and close the
compartment,
- insert the cartridge into the changer,
- close the sliding panel A.
76
YO U R 306 IN D ETA IL
RADIO/NAVIGATION "Travel Pilot"
Note : Do not drive with the front panel flap open.
*According to specification
The instructions for using the Radio/Navigation «Travel Pilot» are attached to the CD, on delivery of the vehicle.
77
YO U R 306 IN D ETA IL
CD CHANGER (Available as an accessory)
C
B
A
To insert a disc into the changer:
- open sliding panel A,
- press button B to eject the cartridge C,
C
D
- open one of the six compartments of the cartridge by pulling tab D,
- insert the disc with the printed face upwards and close the
compartment,
- insert the cartridge into the changer,
- close the sliding panel A.
50
YO U R 306 IN D ETA IL
1
1
1
1
2
4
2
3
3
5
5
6
6
51
YO U R 306 IN D ETA IL
Ventilation
1 - Windscreen demisting or de-icing vents.
2 - Front windows demisting or de-icing vents.
3 - Side vents.
4 - Central vents.
5 - Air outlet to front footwells.
6 - Air outlet to rear footwells.
Advice on use
-
Position the air flow control at a sufficient level to ensure correct renewal of air inside the vehicle.
-
Select the most suitable air distribution for your requirements and the climatic conditions.
-
Select a suitable temperature setting and only modify it gradually for your comfort.
52
YO U R 306 IN D ETA IL
2 - Adjusting the temperature
3
2
1
Turn the knob 2 to the blue zone
(outside temperature) or to the red
zone (hot).
3 - Adjusting the air flow
Turn the knob 3 to the required flow
position.
This position prevents the
entry of outside air. It must
only be used for a short time
to prevent the entry of
unpleasant odours or dust.
HEATING
1 - Adjusting the air distribution
To direct hot or cold air, turn knob 1 to the desired position.
Windscreen and side
Footwells only.
windows.
Windscreen, side windows
Side and central vents.
and footwells.
To quickly de-ice or dem ist the windscreen and the side windows, set the
heating and air flow controls to maximum.
To obtain even air distribution, ensure that the external air intake vent and the
ventilation vents are not blocked and that the air can move freely under the front
seats.
53
YO U R 306 IN D ETA IL
4 - Adjusting the air flow
4
3
Turn the knob 4 to obtain the desired
flow.
Entry of outside air
This is the normal operating
position.
Recirculation of interior air
This position prevents the
entry of outside air.
Used at the same time as the
1
2
air conditioning, this will improve air
conditioning performance.
Used on its own, it prevents the entry
AIR CONDITIONING
of outside air
(dust, unpleasant
odours) but there is a risk of misting of
1 - Switching on
the windows.
Press the switch 1, the operating light will come on.
Avoid continuous operation in interior
2 - Adjusting the temperature
air recirculation mode.
Turn the knob 2 to the blue zone (cold) or to the red zone (hot).
3 - Adjusting the air distribution
Important precautions:
To direct the hot or cold air, turn the knob 3 to the desired position.
Operate the air conditioning system
for 5 to 10 minutes once or twice a
month to keep it in good working
order.
It is advisable to change the air con-
ditioning system fluid every two years.
Windscreen and side
If the system is not producing cold air,
Footwells only.
windows.
stop using it and contact a
PEUGEOT dealer.
Windscreen, side windows
Side and central vents.
and footwells.
54
YO U R 306 IN D ETA IL
3 - Adjusting the air distribution
1
2
3
To direct the hot or cold air, turn the
knob 3 to the desired position.
Windscreen and side
windows.
Windscreen, side windows
and footwells.
4
5
AUTOMATIC AIR CONDITIONING
Footwells only.
This provides optimum comfort as well as dehumidifying the air inside the vehicle.
In particular, it allows the temperature to be lowered in summer and the effective-
ness of the demisting to be increased in winter.
1 - Switching on
Side and central vents.
Press the switch 1, the operating light will come on.
2 - Adjusting the temperature:
Turn the knob 2 to the blue zone (cold) or to the red zone (hot).
On positioning the knob in the white zone the system automatically controls the
operation of the air conditioning. This ensures a comfortable temperature
whatever the climatic conditions may be.
Tem perature selection in auto m ode requires 12 to 15 seconds before the
required temperature is reached.
55
YO U R 306 IN D ETA IL
4 - Adjusting the air flow
Special features
Important precautions
In the AUTO position the flow is con-
If the air distribution control is in the
Operate the air conditioning system
trolled automatically in accordance
windscreen de-icing position, the air
for 5 to 10 minutes once or twice a
with the temperature selected.
conditioning system will start operat-
month to keep it in good working
You can, however, adjust the flow
ing automatically when the engine is
order.
manually by turning the knob
4
switched on.
It is advisable to change the air con-
according to the desired flow.
If the air flow control is in the AUTO
ditioning
system fluid
every
In AUTO mode, this automatically
position, and air recirculation is
2 years.
adjusts the temperature inside the
selected, air conditioning will start
If the system is not producing cold air,
vehicle according to your wishes (pre-
automatically in order to prevent con-
stop using it and contact a
set temperature). To do this, the elec-
densation on the windows.
PEUGEOT dealer.
tronic control unit adjusts the temper-
When you switch on the ignition, the
ature and the flow of air at the vents
air conditioning will automatically
and operates the air conditioning
return to the operating mode it was in
system if necessary.
when it was last used. If the inside
temperature is greatly different from
the required temperature displayed
5 - Recirculation of interior air
and the outside temperature is above
Press the switch 5, the indicator light
5 °C the air conditioning will switch on
comes on.
automatically regardless of the posi-
The air conditioning comes into oper-
tion of the air flow control.
ation automatically.
When the ignition is switched on, if
This position must only be used in
the system had been in air recircula-
exceptional circumstances to:
tion mode, the system will automati-
- improve the performance of the air
cally allow entry of outside air unless
conditioning,
the temperature inside the vehicle is
over 30 °C.
- prevent the entry of external air
(dust, unpleasant odours),
- speed up heating inside the vehicle
with a risk of misting of the
windows.
83
YO U R 306 IN D ETA IL
SEATS
1 -
Forward-backwards adjustment
6
4
Lift the lever and slide the seat forwards
or backwards.
2 -
Adjusting the driver’s seat height
Pull the telescopic handle forwards and
pivot it up or down.
3 -
Adjusting the seat back angle
Turrn the knob to obtain the best angle
(4/5-door and estate).
Lift the handle to obtain the best angle
(3-door).
5
4 -
Lumbar adjustment*
Turn the knob.
5 -
Access to the rear seats (3-door)
Lift the handle, tilt the seat-back and
slide the seat forwards. When it slides
back, the seat will return to its original
position.
1
6 -
Head restraint
Height adjustment: slide the head
restraint.
Adjustment is correct when the top of the
head restraint is level with the top of the
head.
The angle of the head restraint can also
be adjusted.
3
To remove the head restraint, press the
2
tab and pull the head restraint upwards.
* According to specification.
84
YO U R 306 IN D ETA IL
For maximum safety, it is essential
to adjust the corresponding front
seat to the intermediate longitudinal
position, seat back upright.
Follow the instructions for fitting
the child seat in the leaflet provi-
ded when the child seat is purcha-
sed.
Heated seat controls*
Isofix mounting**
Press the switch.
The Isofix mountings available on
The temperature is controlled auto-
the two rear seats allow for the ins-
matically.
tallation of special child seats**
,
approved by UTAC for Peugeot
Pressing a second time stops opera-
vehicles and marketed within the
tion.
network. The fixings are available as
an accessory and must be fitted by
an approved PEUGEOT dealer.
The locks incorporated in the child
seat fit onto the mounting and ensu-
re quick, reliable and safe installation
of the seats. The combined use of
the seat belt is compulsory for a for-
ward-facing child seat.
In the front, it is compulsory to fit
the child seat in the rear-facing posi-
tion*** (in this instance it is imperati-
ve to disarm the passenger airbag if
your vehicle is fitted with one). The
* According to specification.
forward-facing position is permitted
** During the model year.
in the rear.
*** According to current legislation.
85
YO U R 306 IN D ETA IL
5
4
A
1
3
2
1
REAR SEATS (3 and 5 doors)
Rear parcel shelf
Rear parcel shelf with integral
To fold the rear seats:
speakers
- insert the seat belt stalks in the hooks A.
To remove:
- pull the strap 1.
- Turn the speaker connector to the
left then disconnect it.
- tilt the seat cushion 2 against the front seats.
- Unhook the two cords.
- position the seat belt under the lever 3 (5-door) or on top of the seat-back
(3-door).
- Raise the shelf.
- unlock the seat back using the controls on the side 3 (5-door) or on the seat back
- Remove the shelf.
4
(3-door).
Storage: turn the shelf over and lay it
- tilt the seat back 5.
flat in the boot.
To tilt the rear seats, always start with the seat cushion, never with the seat
Rear parcel shelf without integral
back (risk of damage).
speakers
When repositioning, take care to avoid trapping the seat belts under the seat
To remove:
cushion or behind the seat back.
- Unhook the two cords.
To remove the rear seat cushion, tilt the seat cushion through 90° and remove it.
- Raise the shelf.
To replace the seat cushion: position it on the front securing plates and lower it into
- Remove the shelf.
its normal position.
86
YO U R 306 IN D ETA IL
1
A
B
REAR SEATS (4 DOOR)
From inside the boot, unlock the
The additional locking control 1 locks
control 1.
the seat back. Access is from inside
To fold the seat back
the boot:
Position the seat belt under the strap
Insert the seat belt stalks in the hooks.
guide B.
X: Locking
The seat back can be folded in one
Unlock the seat back by pressing the
0 : Unlocking
or two parts*.
button A.
It is essential to lock the seat back
Tilt the seat back.
to prevent access to the boot from
When repositioning, ensure that the
inside the vehicle.
seat belts are positioned correctly and
that the seat back is secured
correctly.
* According to specification.
87
YO U R 306 IN D ETA IL
4
A
1
3
2
REAR SEATS (estate)
Luggage cover
Access to the boot:
To fold the rear seats:
- from the rear: fold the components
- Insert the seat belt stalks in the hooks A.
like an accordion.
- Pull the strap 1.
- from the front
(from the rear
- Tilt the seat cushion 2 against the front seats.
seats): raise the part behind the
seat back.
- Position the seat belt under the lever 3.
- Unlock the seat back using the controls on the side 3.
Retaining nets*
- Tilt the seat back 4.
The lashing points permit the use of a
To tilt the rear seats, always start with the seat cushion, never with the seat
luggage retaining net. A full height
back (risk of damage).
load net is also available as an acces-
sory.
When repositioning, take care to avoid trapping the seat belts under the seat
cushion or behind the seat back.
To remove the rear seat cushion, tilt the seat cushion through 90 degrees and
remove it.
To replace the seat cushion: position it on the front securing plates and lower it into
its normal position.
* According to specification.
84
YO U R 306 IN D ETA IL
For maximum safety, it is essential
to adjust the corresponding front
seat to the intermediate longitudinal
position, seat back upright.
Follow the instructions for fitting
the child seat in the leaflet provi-
ded when the child seat is purcha-
sed.
Heated seat controls*
Isofix mounting**
Press the switch.
The Isofix mountings available on
The temperature is controlled auto-
the two rear seats allow for the ins-
matically.
tallation of special child seats**
,
approved by UTAC for Peugeot
Pressing a second time stops opera-
vehicles and marketed within the
tion.
network. The fixings are available as
an accessory and must be fitted by
an approved PEUGEOT dealer.
The locks incorporated in the child
seat fit onto the mounting and ensu-
re quick, reliable and safe installation
of the seats. The combined use of
the seat belt is compulsory for a for-
ward-facing child seat.
In the front, it is compulsory to fit
the child seat in the rear-facing posi-
tion*** (in this instance it is imperati-
ve to disarm the passenger airbag if
your vehicle is fitted with one). The
* According to specification.
forward-facing position is permitted
** During the model year.
in the rear.
*** According to current legislation.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст