Peugeot Partner Tepee (2017 year). Manual — part 6

79

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

REAR BENCH SEAT

Each 1/3 - 2/3 section can be fully
folded, then removed individually.

Head restraint

The 1/3 - 2/3 split rear bench seat is fitted

with "comma" shape head restraints.

High position: lift and raise the head
restraint.
Low position: press on the head
restraint to lower it.
To remove the head restraint, after
raising it press the tab and lift the head
restraint.
To install the head restraint, engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.

80

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Fully folded position

Example of operations for the
1/3 section. They are identical for the
2/3 section.

-

Raise the grey control bar, located
at the rear of the seat cushion.

-

Tilt the entire seat forward.

Putting back in place

Check that the seat is locked

on the floor securely when it is

returned to the sitting position.

-

Place the head restraints in the low
position.

-

If necessary, move the front seats
forward.

-

Press the grey control located on
the upper part of the seat backrest.

-

Fold the seat backrest onto the
seat cushion.

Tilt the entire seat rearwards until it
locks into place.
Raise the seat backrest.
The seat is locked correctly when the
control (at the top of the seat back) is
no longer visible.

81

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Removing the bench seat

Refitting the bench seat

Refer to the "Fully folded position",
described previously.

To return the bench seat
(1/3 section and/or 2/3 section) to
the "passenger carrying" position,

refer to the "Fully folded position"
described previously.

-

Tilt the entire seat rearwards by
approximately 45°.

-

Lift the bench seat

vertically to the

limit of the anchorages.

-

Straighten bench seat by tilting it
forwards then lift it.

-

If necessary, move the front seats
forward.

-

Place the bench seat (1/3 section and/or
2/3 section) in the fully folded position.

-

Offer up the bench seat (1/3 section
and/or 2/3 section) vertically.

-

Place the hooks between the two
bars.

-

Fold the bench seat rearwards.

82

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

REAR SEATS (5 SEAT VERSION)

Head restraint

Each seat can be removed individually.
Each time a seat is returned to the
sitting position or after removing then

refitting a seat, check that it is locked

on the floor securely.

The three independent rear seats

are fitted with "comma" shape head

restraints.
The back of the centre seat, folded
onto the seat cushion, has a shell
which serves as a table with cup
holder.

High position: lift and raise the head
restraint.
Low position: press on the head
restraint to lower it.
To remove the head restraint, after
raising it press the tab and lift the head
restraint.
To install the head restraint, engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.

83

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Adjusting the angle of the seat backrest

Placing the seat back in the

table position

Returning the seat back to the sitting position

Placing the seat in the fully

folded position

Returning the seat to its original position

-

Operate the control and adjust the
angle of the seat backrest.

-

Pull the control to fold the seat back
onto the seat cushion.

Do not place hard or heavy objects
on the table. They could become
dangerous projectiles in the event of
sharp braking or impact.

-

Release the seat back by pulling
the control, then return it to its
original position.

When returning the seat backrest to
the sitting position, ensure that it is
locked securely.

-

Pull the control to place the seat
back in the table position.

-

Raise the bar located behind the
seat to release the rear anchoring
points.

-

Tilt the entire seat forwards, until it
locks.

-

Push the red control.

- Fold back the seat to fix the rear

anchoring points.

-

Raise the seat backrest by pulling
the control.

-

Check that the seat has correctly
locked into place.

Before unfolding the seat, check
that no object is obstructing the
anchorage points or preventing
correct locking of the seats.

84

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Removing the seat

-

If necessary, move the front
seats forward and lower the head
restraint.

-

Place the seat in the fully folded
position.

Good practice

Following the various operations:
-

do not remove a head restraint

without storing it and fix it to a

support,

-

ensure that the passengers can
always access the seat belts and
fasten them easily,

-

passengers must never take
their seat without adjusting and
fastening their seat belt.

Refer to the "Fully folded position"
described previously.

-

Press the red lever to release the
front feet.

-

Tilt the entire seat rearwards by
approximately 45° without releasing
the lever.

-

Release the lever.

-

Lift the seat

vertically to the limit of

the anchorages.

-

Straighten the seat by tilting it
forwards then lift it.

Refitting the seat

-

Tilt the seat forward by 45°.

-

Place the hooks between the
two bars.

- Fold back the seat to fix the rear

anchoring points.

-

Pull the control to return the seat
back to its initial position.

-

Raise the head restraint.

Before unfolding the seat, check
that no object is obstructing the
anchorage points or preventing
correct locking of the seats.

85

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Head restraint

This is of the "comma" shape type.
High position: press the tab, lift and
raise the head restraint.
Low position: push the tab and press
the top of the head restraint to lower it.
To remove the head restraint: place it
in the high position, lift it, then remove
it.
Store it inside the vehicle, securing it

firmly.
To install the head restraint: engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.

Each seat can be removed and must

be replaced in the specified position,

indicated by a symbol on its label.

The seats of row 2 and row 3 are
independent and adjustable.

REAR SEATS (7 SEAT VERSION)

86

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Left-hand outer seat

Types of Row 2 seat

Types of Row 3 seat

Centre seat

Right-hand outer seat

Right-hand outer seat

Left-hand outer seat

87

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Adjusting the angle of the seat backrest
-

Operate the control and adjust the
angle.

Placing the seat backrest in the

table position
-

Lower the head restraint fully.

-

Operate the control to fold the seat
back onto the seat cushion.

Returning the seat backrest to the

sitting position
-

Release the seat backrest by
pulling the control, then return it to
its original position.

-

Ensure that it has correctly locked
into place.

Placing the seat in the fully folded

position
-

Place the seat in the table position.

-

Pull the red strap, located behind
the seat, to release the feet of the
seat from their anchorage on the

floor.

-

Tilt the entire seat forwards.

Row 2 seat adjustments

Returning the seat to its original

position
-

Unfold the entire seat.

Before folding the seat, ensure
that:
-

in row 3, no passenger's
foot is at one of the seat

anchorages on the floor,

-

the seat is locked securely on

the floor,

-

the seat belt is available for
the passenger.

88

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Row 3 seat adjustments

Placing the seat backrest in the

table position
-

Lower the head restraint fully.

-

Operate the control to fold the seat
backrest onto the seat cushion.

Returning the seat backrest to the

sitting position
-

Release the seat backrest by
pulling the control, then return it to
its original position.

-

Check that it has correctly locked in
place.

Returning the seat to its original

position
-

Push the red control.

-

Unfold the entire seat.

Placing the seat in the fully folded

position
-

Place the seat in the table position.

- Raise the bar fitted with a red

strap, located behind the seat, to
release feet of the seat from their

anchorage on the floor.

-

Tilt the entire seat forwards.

Ensure that:
-

the seat is locked securely on

the floor,

-

the seat belt is available for
the passenger.

89

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Entering, exiting from Row 3

Entering
-

Place the row 2 seat in the table
position.

Exiting
-

Lower the head restraint fully.

-

Operate the yellow control, located
on the back of the row 2 seat
backrest.

-

Fold the seat backrest to the table
position.

Ensure that the centre seat belt is
stowed correctly in its housing in
the headlining.

-

Tilt it to the fully folded position to
allow access.

-

Pull the red strap to place the seat
in the fully folded position.

-

Tilt the entire seat forwards.

-

Exit via the side door.

Before folding it back, ensure that
the feet of the passenger in row 3
are not obstructing the row 2 seat
anchoring points.

90

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Removing a seat
-

If necessary, move the front seats
forward.

-

Lower the head restraint.

-

Place the seat in the fully folded
position.

-

Tilt the entire seat forwards then
lift it.

Refitting the seat
The label on the seat indicates the
position in which it must be installed.
-

Place the hooks of the front feet
between the two bars.

- Fold back the seat to fix the rear

anchoring points.

-

Operate the control to raise the
seat back to its initial position.

-

Raise the head restraint.

Ensure that no object or foot of a
passenger seated in the rear is
obstructing the anchorage points
or preventing correct locking of
the seat.

Operating the Row 2 seats

91

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Operating the Row 3 seats

Removing the seat
-

Lower the head restraint.

-

Place the seat in the fully folded
position.

-

Tilt the entire seat forwards.

-

On each side, take hold of the
uprights of the folded seat, tilting it
forward slightly, and lift it.

Refitting the seat
The label on the seat indicates the
position in which it must be installed.
-

Place the hooks of the front feet
between the two bars.

-

Ensure that no object or foot is
obstructing the rear anchorage
points and that the seat belt is
positioned correctly and available
for use.

- Fold back the seat to fix its rear

anchoring feet.

-

Operate the control to raise the
seat back to its initial position.

-

Raise the head restraint.

Good practice

Following the various operations:
-

do not remove a head restraint
without stowing it; secure it inside
the vehicle,

-

ensure that the passengers can
always access the seat belts and
fasten them easily,

-

passengers must never take
their seat without adjusting and
fastening their seat belt.

-

a passenger seated in row 3 must
ensure that he does not obstruct
the row 2 seat anchorage points,

-

a passenger seated in row 3 must
not have the seat in front of them in
row 2 in the folded position; this is
in case the seat could tip towards
the passenger unexpectedly and
injure them.

Do not place hard or heavy objects on
the seat backs forming a table, they
could become dangerous projectiles in
the event or sharp braking or impact.

92

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

MODULARITY AND DIFFERENT SEAT CONFIGURATIONS
5 seat layouts

93

EASE OF USE and COMFORT

4

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Seats

Partner2VP_en_Chap04_Ergonomie_ed02-2016

7 seat layouts

The various operations
must be carried out while
stationary.

94

Partner2VP_en_Chap04_Ergonomie_ed02-2016

Practical information

Partner2VP_en_Chap04_Ergonomie_ed02-2016

FRONT FITTINGS

1. Lower glove box

This may or may not be fitted with a lid.

Upper storage compartment

This is located on the dashboard,
behind the steering wheel.
A recess makes lifting of the lid easier
when opening. Guide it to its rest
position.
To close, guide the lid then press the
centre gently.
Any liquid which could spill risks
causing an electrical short circuit and

therefore a potential fire.

3. Side storage compartment

4. Bag hook

Only hang flexible bags which are not

too heavy on this hook.

2. Storage pocket and bottle

holder (1.5 L)