Peugeot Partner Tepee (2017 year). Manual — part 17

Audio and Telematics

255

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

Select "

Contacts".

Select the desired contact from the list offered.

Select "

Call".

Calling a recently used number

Press on

Telephone to display the

primary page.

Select "

Call log".

Select the desired contact from the list offered.

It is always possible to make a call
directly from the telephone; park the
vehicle first as a safety measure.

Managing contacts / entries

Press on

Telephone to display the

primary page.

Select "

Contacts".

Select "

View".

Select "

Create" to add a new contact,

observing the "international format".

Or

"

Modify" to edit the selected contact.

Or

"

Delete" to delete the selected

contact.

Or

"

Delete all" to delete all information

for the selected contact.

Select "

By name" to view the list of

contacts.

Audio and Telematics

256

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

The table below gives answers to the most frequently asked questions on your audio system.

Frequently asked questions

Navigation

QUESTION

ANSWER

SOLUTION

The route calculation is not
successful.

The navigation settings may conflict with the current location
(exclusion of toll roads on a toll motorway).

Check the settings in the "Navigation" menu.

The POIs do not appear.

The POIs have not been selected.

Select the POIs in the list of POIs.

The Risk areas audible
warning does not work.

The audible warning is not active.

Activate audible warnings in the "Navigation"
menu.

The system does not
suggest a detour around an
incident on the route.

The guidance criteria do not take account of TMC messages.

Select the "Information" function in the list of
guidance criteria.

I receive a Risk areas alert
which is not on my route.

Other than guidance, the system announces all Risk areas
positioned in a cone located in front of the vehicle. It may provide an
alert for Risk areas located on nearby or parallel roads.

Zoom in on the map to view the exact position of
the Risk areas. Select "On the route" to no longer
receive alerts other than guidance or to reduce
the time for the announcement.

Audio and Telematics

257

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

QUESTION

ANSWER

SOLUTION

Certain traffic jams along
the route are not indicated
in real time.

On starting, it is several minutes before the system begins to receive
the traffic information.

Wait until the traffic information is being received
correctly (display of the traffic information icons
on the map).

The filters are too restrictive.

Modify the settings.

In certain countries, only major routes (motorways...) are listed for
the traffic information.

This phenomenon is normal. The system is
dependent on the traffic information available.

The altitude is not
displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly.

Wait until the system has completed starting
up, so that there is GPS coverage of at least
4 satellites.

Depending on the geographical environment (tunnel...) or the
weather, the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.

Audio and Telematics

258

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

Radio

QUESTION

ANSWER

SOLUTION

The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz is displayed...).

The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through which the vehicle is travelling.

Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more powerful transmitter in
the geographical area.

The environment (hills, buildings, tunnels, basement car parks...)
block reception, including in RDS mode.

This phenomenon is normal and does not indicate
a fault with the audio system.

The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park).

Have the aerial checked by a PEUGEOT dealer.

I cannot find some radio
stations in the list of
stations received.

The station is not received or its name has changed in the list.

Press on the "Update list" function in the system
to update the list of stations received.

Some radio stations send other information in place of their name
(the title of the song for example).
The system interprets this information as the name of the station.

The name of the radio
station changes.

Audio and Telematics

259

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

Media

QUESTION

ANSWER

SOLUTION

Playback of my USB
memory stick starts only
after a very long wait
(around 2 to 3 minutes).

Some files supplied with the memory stick may greatly slow down
access to reading the memory stick (multiplication by 10 of the
catalogue time).

Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.

When I connect my iPhone
as telephone and to the
USB port at the same time,
I am unable to play the
music files.

When the iPhone connects automatically as a telephone, it forces
the streaming function. The streaming function takes the place of
the USB function which is then not useable, there is a period without
sound of the track being played with Apple

®

players.

Disconnect and reconnect to the USB port (the
USB function takes priority over streaming).

Some characters in the
media information are not
displayed correctly while
playing.

The audio system does not display some types of characters.

Use standard characters to name tracks and
folders.

Playing of streaming files
does not start.

The peripheral device connected does not support automatic play.

Start the playback from the device.

The names of tracks and
the track length are not
displayed on the screen
when streaming audio.

The Bluetooth profile does not allow the transfer of this information.

Audio and Telematics

260

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

QUESTION

ANSWER

SOLUTION

In changing the setting
of treble and bass the
equalizer setting is
deselected.

The selection of an equalizer setting imposes the balance settings.
Modifying one without the other is not possible.

Modify the balance or equalizer settings to obtain
the desired musical ambience.

In changing the equalizer
setting, treble and bass
return to zero.

When changing the
balance settings, the
distribution setting is
deselected.

The selection of a distribution setting imposes the balance settings.
Modifying one without the other is not possible.

Modify the balance or distribution settings to
obtain the desired musical ambience.

When changing a sound
distribution setting,
the balance setting is
deselected.

When I select the "All
passengers" mode, the
distribution is not as I
would like.

The choice of an "All passengers" distribution can be programmed.

Modify the distribution setting using the slider on
the touch screen.

Settings

Audio and Telematics

261

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

QUESTION

ANSWER

SOLUTION

There is a difference in
sound quality between the
different audio sources.

For optimum sound quality, the audio settings for Volume:, Bass:,
Treble:, Ambience and Loudness can be adapted to the different
sound sources, which may result in audible differences when
changing source.

Check that the audio settings for (Volume:, Bass:,
Treble:, Ambience, Loudness) are adapted to the
sources listened to. It is advisable to set the audio
functions (Bass:, Treble:, Balance) to the middle
position, select the "None" musical ambience
and set the loudness correction to the "Inactive"
position in radio mode.

With the engine off, the
system switches off after a
few minutes of use.

When the engine is switched off, the system's operating time
depends on the state of charge of the battery.
The switch-off is normal: the system switches to economy mode and
switches off to prevent discharging of the vehicle's battery.

Start the vehicle's engine to increase the battery
charge.

Audio and Telematics

262

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

QUESTION

ANSWER

SOLUTION

I cannot connect my
Bluetooth telephone.

The telephone's Bluetooth function may be switched off or the
telephone may not be visible.

Check that your telephone's Bluetooth function is
switched on.
Check in the telephone settings that it is "Visible
to all".

The Bluetooth telephone is not compatible with the system.

You can check the compatibility of your telephone
at www.peugeot.co.uk (services).

The volume of the
telephone connected
in Bluetooth mode is
inaudible.

The volume depends both on the system and on the telephone.

Increase the volume of the audio system, to
maximum if required, and increase the volume of
the telephone if necessary.

The ambient noise level has an influence on the quality of telephone
communication.

Reduce the ambient noise level (close the
windows, reduce the booster fan speed, slow
down...).

Some contacts are
duplicated in the list.

The options for synchronizing contacts are synchronizing the
contacts on the SIM card, the contacts on the telephone, or both.
When both synchronizations are selected, some contacts may be
duplicated.

Select "Display SIM card contacts" or "Display
telephone contacts".

Contacts are not shown in
alphabetical order.

Some telephones offer display options. Depending on the settings
chosen, contacts can be transferred in a specific order.

Modify the display setting in the telephone
directory.

The system does not receive
SMS text messages.

The Bluetooth mode does not permit sending SMS text messages to
the system.

Telephone

Audio and Telematics

263

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

Partner2VP_en_Chap10a_SMEGplus_ed02-2016

Audio and Telematics

265

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10b_RD45_ed02-2016

PEUGEOT Connect Sound (RD5)

Audio system / Bluetooth

®

Contents

First steps

266

Steering mounted controls

267

Menus 268
Radio 268
Media 270
Telephone 274
Screen menu map(s)

276

Frequently asked questions

280

Your PEUGEOT Connect Sound (RD5) is coded in such a way
that it will only operate in your vehicle.

As a safety measure, the driver must only carry out operations
which require prolonged attention while the vehicle is stationary.
When the engine is switched off and to prevent discharging of the
battery, the audio equipment may switch off after a few minutes.

Audio and Telematics

266

Partner2VP_en_Chap10b_RD45_ed02-2016

First steps

* Available according to version.

On / Off, volume setting.

Select source:
Radio; USB; AUX; CD; Streaming.

Display the list of local stations.
Long press: CD tracks or MP3 folders
(CD / USB).

Select the screen display mode:
Date, audio functions, trip computer,
telephone.

Audio settings:
Front/rear fader, left/right balance,
bass/treble, loudness, audio
ambiences.

The DARK button changes the
screen display for improved driving
comfort at night.
1

st

press: upper bar only illuminated.

2

nd

press: black screen.

3

rd

press: return to standard display.

Select next frequency down/up.
Select previous/next MP3 folder.
Select previous/next folder / genre /
artist / playlist (USB).

Abandon the current operation.

Confirm.

Buttons 1 to 6
Select a pre-set radio station.
Long press: pre-set a station.

Automatic frequency search down/up.
Select previous/next CD, MP3 or
USB track.

Eject CD.

Display main menu.

TA (Traffic Announcements) on/off.
Long press: PTY* (radio Programme
TYpe).

Select AM / FM wavebands.

Audio and Telematics

267

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10b_RD45_ed02-2016

Steering mounted controls

Radio: select the previous/next
pre-set station.
USB: select genre / artist / folder
from the classification list.
Select the previous/next item in
a menu.

Volume decrease.

Radio: automatic search for a higher
frequency.
CD / MP3 / USB: select the next
track.
CD / USB: continuous press: fast
forward.
Move in the list.

Mute: press the volume increase and
decrease buttons simultaneously.
The sound is restored by pressing
one of the two volume buttons.

Radio: automatic search for a lower
frequency.
CD / MP3 / USB: select the previous
track.
CD / USB: continuous press: rewind.
Move in the list.

Change audio source.
Confirm a selection.
Call/end call on the telephone.
Press for more than 2 seconds:
telephone main menu.

Volume increase.

Audio and Telematics

268

Partner2VP_en_Chap10b_RD45_ed02-2016

Menus

Screen C

Audio functions
Radio; CD; USB; AUX.

Trip computer
Enter distances; Alerts; State of
functions.

Bluetooth

®

: Telephone - Audio

Pairing; Hands-free kit; Streaming.

Personalisation-configuration
Vehicle parameters; Display;
Languages.

For an overview of the menus available,
refer to the "Screen menu map"
section.

Screen A

Radio

Selecting a station

Press the

SOURCE button several

times in succession and select the
radio.

Press the

BAND AST button to

select a waveband.

Briefly press one of the buttons to
carry out an automatic search of the
radio stations.

Press one of the buttons to carry out
a manual search up / down for radio
frequencies.

Press the

LIST REFRESH button to

display the list of stations received
locally (30 stations maximum).
To update this list, press for more
than two seconds.

Audio and Telematics

269

TECHNOLOGY

on

BOARD

10

Partner2VP_en_Chap10b_RD45_ed02-2016

RDS

The external environment (hills,
buildings, tunnels, basement car
parks, ...) may block reception,
including in RDS mode. This is a
normal effect of the way in which radio
waves are transmitted and does not
indicate any failure of the audio system.

Press the

MENU button.

Select "

Audio functions".

Press

OK.

Select the "

FM waveband

preferences" function.

Press

OK.

Select "

Activate RDS".

Press

OK, RDS is displayed in the

screen.

In "

Radio" mode, press OK directly to activate /

deactivate RDS mode.

RDS, if displayed, enables you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the country as radio stations
do not cover 100 % of the territory. This
explains the loss of reception of a station
that can occur during a journey.

Receiving TA messages

Press the

TA button to activate or

deactivate traffic messages.

The TA (Traffic Announcement)
function gives priority to TA alert
messages. To operate, this function
needs good reception of a radio station
transmitting this type of message.
When a traffic report is transmitted, the
current audio source (Radio, CD, ...)
is interrupted automatically to play the
TA message. Normal playback of the
audio source resumes at the end of the
transmission of the message.

Audio and Telematics

270

Partner2VP_en_Chap10b_RD45_ed02-2016

Media

USB port

This unit consists of a USB port
and an auxiliary Jack socket,
depending on model.

Insert a USB memory stick into the USB port
or connect a USB peripheral device to the USB
port using a suitable cable (not supplied).

The system creates playlists
(temporary memory), which can take
from a few seconds to several minutes
on the first connection.
Reducing the number of non-music
files and the number of folders reduces
this waiting time. Playlists are updated
every time the ignition is switched off or
a USB memory stick is connected.
The lists are memorised: if the lists are
not changed, the subsequent loading
time is reduced.

Press and hold

REFRESH LIST to

display the different classifications.

Select by "

Folder" / "Artist" /

"

Genre" / "Playlist".

Press

OK to select the classification

required, then press

OK again to

confirm.

Press

REFRESH LIST briefly to

display the previously selected
classification.

Navigate through the list using the
left / right and up / down buttons.

Confirm the selection by pressing
OK.

Press one of these buttons to gain
access to the previous / next track in
the list.
Press and hold one of the buttons for
fast forward or rewind.

Press one of these buttons to
gain access to the previous / next
"

Folder" / "Artist" / "Genre" /

"

Playlist" in the list.

To protect the system, do not use a
USB hub.