Peugeot Expert VU (2016 year). Manual — part 27
.
415
1
8
9
1
1
13
14
15
16
11
10
12
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Level 3
Comments
Settings
Secondary page
Screen
configuration
Animation
Activate or deactivate settings.
Brightness
Adjust the level of brightness.
Confirm
Save the settings.
Settings
Secondary page
System settings
Units
Distance and fuel
consumption
Set the units used for distance, fuel consumption
and temperature.
temperature
Factory settings
Reinitialize
Return to the factory settings.
System info
View
View the versions of the different modules
(system, mapping, risk areas) installed in the
system as well as the updates available.
Confirm
Save the settings.
Settings
Secondary page
Languages
All
Select the language then confirm.
Europe
Asia
America
Confirm
Having selected the language, save the setting.
416
1
17
18
19
20
21
22
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Settings and tools
Setting the time-date
Setting of the profiles
Level 3
.
417
1
17
18
1
20
19
21
22
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Level 3
Comments
Settings
Secondary page
Setting the
time-date
Date
Date
Enter the date and select the date format.
Date format:
Time
time
Set the time.
Time Zone
Define the time zone.
time format:
Select the time format: 12h / 24h.
Synchronisation with
gPS (utC):
Activate or deactivate synchronisation with gPS.
Confirm
Save the settings.
Settings
Secondary page
Setting of the
profiles
Profile 1
Enter settings for the profiles.
Profile 2
Profile 3
Common profile
Confirm
Save the settings.
418
3
4
5
6
7
1
19
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Press Settings to display the primary
page.
Profile settings
Audio settings
Press Settings to display the primary
page.
Select "Audio settings".
Select "Ambience".
or
"Position".
or
"Sound".
or
"Voice".
or
"Ringtone".
on-board audio: Arkamys
©
Sound
Staging optimises the distribution of
sound in the passenger compartment.
the settings for "Position" (All
passengers, Driver and Front only) are
common to all sources.
Activate or Deactivate "Touch tones",
"Volume linked to speed" and
"Auxiliary input".
the sound distribution (or spatialisation
with the Arkamys
©
system) is audio
processing that allows the quality of the
sound to be adapted according to the
number of passengers in the vehicle.
Available only with the 6-speaker
configuration.
the audio Ambience settings
(6 ambiences available) as well as the
Bass, Medium and Treble settings
are different and independent for each
sound source.
Activate or Deactivate "Loudness".
Press "Confirm" to save the settings.
Press "Confirm".
Press the "OPTIONS" button to go to
the secondary page.
Select "Profile 1", "Profile 2",
"Profile 3" or "Common profile".
Select "Setting of the profiles".
Press this button to enter a name for
the profile using the virtual keypad
As a safety measure and because it
requires the sustained attention of the
driver, changes to settings must only be
done with the vehicle stationary.
.
419
3
2
4
5
6
7
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Select a "Profile" (1 or 2 or 3) to
associate the "Audio settings" with it.
Select "Audio settings".
Select "Ambience".
or
"Distribution".
or
"Sound".
or
"Voice".
or
"Ringtone".
the location for the photograph is
square; the system deforms the original
photograph if in another format.
Initialisation of the profile selected
activates the English language by default.
Press "Confirm" to save the settings.
Press "Confirm" to accept the
transfer of the photograph.
Press "Confirm" again to save the
settings.
Press this button to add a photograph
to the profile.
Insert a uSB memory stick containing
the photograph in the uSB port.
Select the photograph.
Press this button to initialise the
profile selected.
420
1
1
1
10
11
12
8
9
1
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Press Settings to display the primary
page.
Press Settings to display the primary
page.
Press Settings to display the primary
page.
Press the "OPTIONS" button to go to
the secondary page.
Press the "OPTIONS" button to go to
the secondary page.
Press the "OPTIONS" button to go to
the secondary page.
Select "System settings".
Select "Screen configuration".
Select "Units" to change the units
for distance, fuel consumption and
temperature.
Select "Languages" to change the
language.
Activate or deactivatre "Automatic
scrolling".
Adjust the brightness of the screen.
Select "Factory settings" to return
to the initial settings.
Select "System info" to display the
versions of the different modules
installed in the system.
Modifying system settings
Returning the system to factory settings
activates the English language by
default.
Select "Animation".
Select "Brightness".
Select the language
Press Settings to display the primary
page.
Press the "OPTIONS" button to go to
the secondary page.
Select "Setting the time-date".
Setting the date
.
421
1
17
18
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Press Settings to display the primary
page.
Press the "OPTIONS" button to go to
the secondary page.
Select "Date".
Select "Time".
Select "Setting the time-date".
Adjustment of the time and date is only
available if synchronisation with gPS is
deactivated.
the change between winter and
summer time is done by changing the
time zone.
the system does not automatically
manage the change between winter
and summer time (depending on
country).
Setting the time
Press this button to define the date.
Press this button to adjust the time
using the virtual keypad.
Press "Confirm".
Press "Confirm".
Press "Confirm".
Press this button to define the time
zone.
Select the display format of the date.
Select the display format for the
time (12h / 24h).
Activate or deactivate
synchronisation with gPS (utC).
422
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
the following table groups together the answers to the most frequently asked questions concerning your audio system.
QUESTION
ANSWER
SOLUTION
the route calculation is
not successful.
the route settings may conflict with the current location (exclusion
of toll roads on a toll motorway).
Check the route settings in the "Navigation"
menu.
the PoIs do not appear.
the PoIs have not been selected.
Select the PoIs in the list of PoIs.
the audible warning of
"Danger areas" does not
work.
the audible warning is not active.
Activate audible warnings (without the possibility
of adjusting the volume) in the "Navigation"
menu.
the system does not
suggest a detour around
an incident on the route.
the guidance criteria do not take account of tMC messages.
Select a setting for the "traffic info" function
in the list of route settings (Without, Manual or
Automatic).
I receive a "Danger area"
alert which is not on my
route.
other than guidance, the system announces all "Danger areas"
positioned in a cone located in front of the vehicle. It may provide
an alert for "Danger areas" located on nearby or parallel roads.
Zoom in on the map to view the exact position of the
"Danger areas". Select "on the route" to no longer
receive alerts other than navigation instructions or to
reduce the time for the announcement.
Frequently asked questions
Navigation
.
423
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
QUESTION
ANSWER
SOLUTION
Certain traffic jams along
the route are not indicated
in real time.
on starting, it is several minutes before the system starts to receive
traffic information.
Wait until the traffic information is being received
correctly (display of the traffic information icons
on the map).
In certain countries, only major routes (motorways...) are listed for
the traffic information.
this phenomenon is normal. the system is
dependent on the traffic information available.
the altitude is not
displayed.
on starting, the initialisation of the gPS may take up to 3 minutes to
receive more than 4 satellites correctly.
Wait until the system has started up completely
so that there is gPS coverage by at least
4 satellites.
Depending on the geographical environment (tunnel...) or the
weather, the conditions of reception of the gPS signal may vary.
this phenomenon is normal. the system
is dependent on the gPS signal reception
conditions.
424
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Radio
QUESTION
ANSWER
SOLUTION
the quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz is displayed...).
the vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through which the vehicle is travelling.
Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more powerful transmitter in
the geographical area.
the environment (hills, buildings, tunnels, basement car parks...)
block reception, including in RDS mode.
this phenomenon is normal and does not
indicate a fault with the audio system.
the aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park).
Have the aerial checked by a franchised dealer.
I cannot find some radio
stations in the list of
stations received.
the station is not received or its name has changed in the list.
Press on the "update list" button in the "Radio
stations" secondary menu.
Some radio stations send other information in place of their name
(the title of the song for example).
the system interprets this information as the name of the station.
the name of the radio
station changes.
.
425
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
Media
QUESTION
ANSWER
SOLUTION
Playback of my uSB
memory stick starts only
after a very long wait
(around 2 to 3 minutes).
Some files supplied with the memory stick may greatly slow down
access to reading the memory stick (multiplication by 10 of the
catalogue time).
Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.
Some characters in the
media information are not
displayed correctly while
playing.
the audio system does not display some types of characters.
use standard characters to name tracks and
folders.
Playing of streaming files
does not start.
the peripheral device connected does not support automatic play.
Start the playback from the device.
the names of tracks and
the track length are not
displayed on the screen
when streaming audio.
the Bluetooth profile does not allow the transfer of this information.
426
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
QUESTION
ANSWER
SOLUTION
I cannot connect my
Bluetooth telephone.
the telephone's Bluetooth function may be switched off or the
telephone may not be visible.
Check that your telephone's Bluetooth function is
switched on.
Check in the telephone settings that it is "visible
to all".
the Bluetooth telephone is not compatible with the system.
You can check the compatibility of your
telephone at the brand's website (services).
the volume of the
telephone connected
in Bluetooth mode is
inaudible.
the volume depends both on the system and on the telephone.
Increase the volume of the audio system, to
maximum if required, and increase the volume of
the telephone if necessary.
the ambient noise level has an influence on the quality of
telephone communication.
Reduce the ambient noise level (close the
windows, reduce the booster fan speed,
slow down, ...).
Some contacts are
duplicated in the list.
the options for synchronizing contacts are synchronizing the
contacts on the SIM card, the contacts on the telephone, or both.
When both synchronizations are selected, some contacts may be
duplicated.
Select "Display SIM card contacts" or "Display
telephone contacts".
Contacts are not shown in
alphabetical order.
Some telephones offer display options. Depending on the settings
chosen, contacts can be transferred in a specific order.
Modify the display setting in the telephone
directory.
the system does not
receive SMS text messages.
the Bluetooth mode does not permit sending SMS text messages
to the system.
Telephone
.
427
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
QUESTION
ANSWER
SOLUTION
In changing the setting
of treble and bass the
equalizer setting is
deselected.
the selection of an equalizer setting imposes the settings for treble
and bass and vice-versa.
Modify the treble and bass or equalizer settings
to obtain the desired musical ambience.
In changing the equalizer
setting, treble and bass
return to zero.
When changing the
balance settings, the
distribution setting is
deselected.
the selection of a distribution setting imposes the balance settings
and vice-versa.
Modify the balance or distribution settings to
obtain the desired musical ambience.
When changing a
distribution setting,
the balance setting is
deselected.
Settings
428
Audio and Telematics
Expert_en_Chap10b_NAC-1_ed01-2016
QUESTION
ANSWER
SOLUTION
there is a difference in
sound quality between the
different audio sources.
For optimum sound quality, the audio settings for Loudness,
Ambience, treble, Bass and Volume can be adapted to the different
sound sources, which may result in audible differences when
changing source.
Check that the audio settings for Loudness,
Ambience, treble, Bass and Volume are adapted
to the sources listened to. Adjust the Balance,
treble and Bass to the middle position, select the
"None" musical ambience and set the loudness
correction to the "Active" position in CD mode or
to the "Inactive" position in radio mode.
With the engine off, the
system switches off after a
few minutes of use.
When the engine is switched off, the system's operating time
depends on the state of charge of the battery.
the switch-off is normal: the system switches to economy mode
and switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery
charge.
.
429
Audio and Telematics
Expert_en_Chap10c_RCC-1_ed01-2016
PEugEot Connect Radio
Connectivity - Multimedia audio - Bluetooth
®
telephone
Contents
Menus 433
Connectivity 434
Radio Media
telephone 456
Settings 468
Frequently asked questions
the system is protected in such a way that it will only operate in
your vehicle.
the link below gives access to oSS (open Source Software)
codes for the system.
http://www.psa-peugeot-citroen.com/oss
As a safety measure and because it requires sustained attention
by the driver, the pairing of a Bluetooth mobile telephone with
the Bluetooth hands-free system of your audio system must be
done with the vehicle stationary and the ignition on.
the display of the energy economy mode message signals that
a change to standby is imminent. For more information on the
Energy economy mode refer to the corresponding section.
430
Audio and Telematics
Expert_en_Chap10c_RCC-1_ed01-2016
First steps
With the engine running, a press
mutes the sound.
With the ignition off, a press turns the
system on.
Volume.
use the buttons either side of the touch screen
for access to the menus, then press the virtual
buttons in the touch screen. All of the touch
areas of the screen are white.
Each menu is displayed in one or two pages
(primary page and secondary page).
Secondary page
Primary page
the touch screen is of the "capacitive"
type.
to clean the screen, use a soft,
non-abrasive cloth (spectacles cloth)
with no additional product.
Do not use sharp objects on the
screen.
Do not touch the screen with wet
hands.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст