Peugeot Expert Tepee (2014 year). Manual — part 10

Changing a bulb

QUICK HELP

7

CHANGING A BULB

Type C
Halogen bulb: release the

retaining spring from its

housing.

Type A
All glass bulb: pull gently

as it is fitted by pressure.

TYPES OF BULB

Various types of bulb are installed on your vehicle. To remove them:

Type B
Bayonet bulb: press

on the bulb then turn it

anticlockwise.

Halogen bulbs must be changed after

the headlamp has been off for several

minutes (risk of serious burns). Do not touch

the bulb directly with your fingers, use lint-

free cloths.
When each operation has been completed,

check the operation of the lighting.

144

Changing a bulb

3. Direction indicators

Type B , PY21W - 21W (amber)

- Turn the bulb holder a quarter turn

anticlockwise.

- Remove the bulb by pressing it lightly

while turning it anticlockwise.

- Change the bulb.

- Ensure that the cover is refitted

correctly all the way round to ensure

sealing.

FRONT LAMPS

Open the bonnet. To access the bulbs, reach

behind the headlamp unit.
Carry out the operations in reverse order to

refit each bulb.

1. Dipped / Main beam headlamps

Type C , H4 - 55W

- Remove the centre cover by pulling

the flexible rubber tab.

- Disconnect the electrical connector.
- Release the retaining spring.
- Change the bulb taking care to

align the metal part with the slots in

the lamp.

2. Sidelamps

Type A , W5W - 5W

- Remove the cover by pulling the

flexible rubber tab.

- Remove the bulb holder fitted by

pressure by pulling the connector.

- Change the bulb.
- Ensure that the cover is refitted

correctly all the way round to ensure

sealing.

4. Foglamps

Type C , H1 - 55W

Contact a PEUGEOT dealer or a qualified

workshop.

145

Changing a bulb

QUICK HELP

7

DIRECTION INDICATOR SIDE

REPEATER

Type A , WY5W - 5W (amber)
- Push the repeater towards the rear and

disengage it.

- Support the connector and turn the bulb

holder a quarter turn to the left.

- Turn the bulb a quarter turn to the left,

remove it and change it.

- When refitting, engage the repeater

towards the rear and bring it towards

the front.

Front / Rear

Amber coloured bulbs (direction indicators

and side repeaters) must be replaced with

bulbs of identical specification and colour.

Type A , 12V 5W - 5W
- Unclip the lens by sliding a screwdriver

in the slots on each side of the courtesy

lamp.

- Pull the bulb and change it.
- Clip the lens in its housing and ensure

that it is secured correctly.

High pressure jet washing

When using this type of jet washer

on stubborn dirt, do not persist on the

headlamps, the lamps and their surrounds to

avoid damaging their coating and seals.

146

Changing a bulb

REAR LAMPS

For more information on bulbs, refer to the

"Types of bulb".

- Identify the faulty bulb then open the

rear doors to 180°. Refer to the "Access"

section of chapter 2.

- Remove the two fixing nuts.

Pull the lens unit from the outside.

- Holding the lamp unit, disconnect the

electrical connector.

- Move aside the 8 tabs then extract the

bulb holder.

- Remove the failed bulb by pressing it

lightly while turning it anticlockwise.

-

Change the bulb.

1. Brake lamps / sidelamps

Type B , P21/5W - 21/5W

2. Direction indicators

Type B , PY21W - 21W (amber)

3. Reversing lamps

Type B , P21W - 21W

4. Foglamps

Type B , P21W - 21W

When refitting, take care to correctly

reposition:
-

the 8 tabs,

- the two white lugs in the two rubber

holes to maintain the sealing of the lamp

unit,

- the supply wire to avoid trapping it.

147

Changing a bulb

QUICK HELP

7

THIRD BRAKE LAMP

Type A , W5W - 5W

Type B , P21W - 21W

NUMBER PLATE LAMPS

Type A , W5W - 5W

With tailgate
- Move aside the plastic lens using a

screwdriver, on the point indicated by

the arrow.

-

Change the bulb.

- Replace the plastic lens and press on it.

With hinged doors
-

Unclip the interior trim.

- Disconnect the connector by moving

aside its tab.

-

Remove the plastic cover.

- Turn the bulb holder a quarter turn

anticlockwise.

-

Change the bulb.

Lamp located on the outside (hinged doors)
- Unscrew the two screws using a Torx

TM

20 screwdriver.

-

Remove the lamp.

-

Change the bulb.

Lamp located on the inside (tailgate)
- Unscrew the two screws using a Torx

TM

20 screwdriver.

-

Remove the plastic cover.

- Remove the bulb holder moving aside

the two tabs.

- Remove the failedbulb by pressing it

lightly while turning it anticlockwise.

-

Change the bulb.

148

Changing a fuse

CHANGING A FUSE

The three fuseboxes are placed:
- in the dashboard on the right-hand side (behind the

storage compartment, retractable),

- in the passenger compartment (battery compartment),
- under the bonnet.

Removing and fitting a fuse

Before changing a fuse, the cause of the

fault must be found and rectified.

Always replace a failed fuse with a fuse

of the same rating.

PEUGEOT will not accept responsibility for

the cost incurred in repairing your vehicle

or for rectifying malfunctions resulting from

the installation of auxiliary accessories

not supplied and not recommended by

PEUGEOT and not installed in accordance

with its instructions, in particular when

the combined consumption of all of the

additional equipment connected exceeds

10 milliamperes.

The descriptions communicated are only the

fuses which can be changed by the user.

For any other operations, go to a PEUGEOT

dealer or a qualified workshop.

For motor trade technicians: for

complete fuse and relay information,

refer to the "Procedures" wiring diagrams via

the dealer network.

149

Changing a fuse

QUICK HELP

7

RIGHT-HAND SIDE DASHBOARD

FUSES

- Tilt the storage compartment then pull it

firmly to access the fuses.

Fuses

A (amps)

Allocation

1

15

Rear wiper

2

-

Free

3

5

Airbag control unit

4

10

Steering wheel angle sensor, Diagnostic socket, DSC sensor,

Manual ventilation, Clutch switch, Headlamp beam height,

Particle emission filter pump

5

30

Electric mirrors, Passenger electric window motor

6

30

Front electric windows supply

7

5

Courtesy lamps and glove box lamp

8

20

Multifunction screen, Anti-theft alarm siren, Audio equipment,

Compact disc changer, Audio/telephone, Trailer fusebox

(accessory)

9

10

Row 2 accessory socket

10

30

Rear ride height corrector, Steering wheel switching,

Instrument panel

11

15

Diagnostic socket, Ignition switch

12

15

Hands-free kit, Airbag control unit, Parking sensors control

unit

13

5

Engine fusebox, Trailer fusebox

14

15

Rain sensor, Rear ventilation, Digital air conditioning,

Instrument panel

15

30

Locking/unlocking/deadlocking

16

-

Free

17

40

Heated rear screen, Heated mirrors

150

Changing a fuse

PASSENGER COMPARTMENT

FUSES

-

Unclip the battery compartment cover.

- Remove the red battery terminal (+).

When you have finished, close the cover

carefully.

Fuses

A (amps)

Allocation

1

30

Heated seats

2

20

Row 3 12V socket

3

40/50

Trailer fusebox (accessory)

4

-

Free

36

15

Hinged door locks

37

10

Hinged door locks

38

20

Hinged door rear wiper

39

10

Rear ventilation

40

5

Folding mirrors

151

Changing a fuse

QUICK HELP

7

FUSES UNDER THE BONNET

- After opening the bonnet, slide aside the

screenwash reservoir support to make

access easier.

- Unclip and tilt the box to access the

fuses.

Fuses

A (amps)

Allocation

1

20

Engine control unit, Fuel supply and air supply systems, Fan

assembly

2

15

Horn

3

10

Front and rear screenwash pump

4

20

Headlamp wash pump

5

15

Fuel supply system

6

10

Power steering, Secondary brake pedal switch

7

10

Braking system (ABS/DSC)

8

20

Starter motor control

9

10

Main brake pedal switch

10

30

Fuel supply and air supply systems, Emissions control

systems

11

40

Front ventilation

12

30

Windscreen wipers

13

40

Built-in systems interface

14

30

Free

152

Changing a wiper blade

Placing the windscreen wiper blades

in the special position

- Less than a minute after switching

off the ignition, press the wiper stalk

downwards to position the wiper blades

along the windscreen pillars (special

position).

Changing a front wiper blade
-

Lift the wiper arm.

- Unclip the blade and remove it.
-

Fit the new blade.

- Push back the wiper arm.

Changing the rear wiper blade
- Lift the wiper arm, then unclip the blade

and remove it.

- Fit the new blade and push back the

wiper arm.

CHANGING A WIPER BLADE

To return the windscreen wipers to their

normal position, switch on the ignition and

operate the wiper stalk.

153

Having your vehicle towed

QUICK HELP

7

Without lifting (4 wheels on the

ground)

You should always use a towing bar.

From the front

- Unclip the cover by pressing at the

bottom,

- Fully screw in the removable towing eye.

TOWING THE VEHICLE

Lifting (2 wheels on the ground only)

It is preferable to lift the vehicle using

professional lifting equipment.

From the rear

- Unclip the cover using a coin or the flat

part of the towing eye,

- Fully screw in the removable towing eye.

Vehicles fitted with a manual

gearbox (Diesel version)

In the case of vehicles fitted with a manual

gearbox, the gear lever must be in the

neutral position. Failure to observe this

special condition may result in damage

to certain braking components and the

absence of braking assistance the next time

the engine is started.

154

Having your vehicle towed

General recommendations

Observe the legislation in force in your

country.
Ensure that the weight of the towing vehicle

is higher than that of the towed vehicle.
The driver must remain at the wheel of the

towed vehicle and must have a valid driving

licence.
When towing a vehicle with all four wheels

on the ground, always use an approved

towing bar; rope and straps are prohibited.
The towing vehicle must move off gently.
When towing a vehicle with the engine off,

there is no longer any power assistance for

braking or steering.
In the following cases, you must always call

on a professional recovery service:
- vehicle broken down on a motorway or

fast road,

-

four-wheel drive vehicle,

- when it is not possible to put the

gearbox into neutral, unlock the

steering, or release the parking brake,

- towing with only two wheels on the

ground,

- where there is no approved towing bar

available...

155

Environment

QUICK HELP

7

ENVIRONMENT

With you, PEUGEOT acts to protect the

environment.
We invite you to visit the

www.peugeot.com

website.

As the driver, you also can contribute to

protecting the environment by following

certain rules:
- adopt a preventive style of driving,

without frequent and harsh acceleration,

- observe the service intervals; we

recommend that services are carried out

by a PEUGEOT dealer, authorised to

collect used batteries and fluids,

- in order to preserve the reliability of the

engine and emission control systems, do

not use engine oil additives.

Refer to information in this handbook

on eco-driving (at the end of section 1).

156

Dimensions

157

Dimensions

TECHNICAL

DA

TA

8

H1

L

Overall length

4 805

5 135

H

Overall height pneumatic / metal suspension

1 895/1 942

A

Wheelbase

3 000

3 122

B

Front overhang

975

C

Rear overhang

830

1 038

Overall width:

on panel

1 870

D

with mouldings

1 895

with mirrors folded

1 986

with mirrors unfolded

2 194

E

Width of front tracks

1 574

F

Width of rear tracks

1 574

Turning circle between kerbs (m)

12.18

12.59

Maximum loads (kg)

Payload

1 000

On roof

170

DIMENSIONS

The vehicle is available in 2 lengths (L1, L2) and 1 height (H1),

refer to the tables:

158

Dimensions

REAR DOORS (mm)

L1

L2

H1

N

Usable height

1 272

O

Usable width

1 237