Peugeot 206 SW Dag (2008 year). Manual — part 5
ACCESS
62 -
OPENING THE BONNET
Inside the vehicle: pull the handle on
the left-hand side, under the fascia.
Outside the vehicle: lift the catch
and raise the bonnet.
BONNET STRUT
Secure the strut to hold the bonnet
open.
Before closing the bonnet, replace
the strut in its housing.
FILLING THE FUEL
TANK
The tank must be illed with fuel with
the engine switched off.
Insert the key then turn it to the left.
Remove the cap.
A label indicates which type of fuel to
use.
If you ill your tank, do not continue
after the third cut-off of the pump
nozzle. This could result in vehicle
malfunctions.
The capacity of the tank is approx-
imately 50 litres.
To close
Lower the bonnet and release it at
the end of its travel.
Check that the bonnet is locked.
63
VISIBILITY -
LIGHTS STALK
Dipped / Main beam
change
Pull the stalk towards you.
Vehicles itted with front
fog lamps and a rear fog lamp
(ring C)
Side lights
Dipped / Main beam
headlamps
Automatic switching
on of lights
Rear fog lamp
Front fog lamps (irst rotation
of the ring forwards)
Front and rear fog
lamps (2nd rotation of
the ring forwards).
Note: to switch off the rear fog lamp
and the front fog lamps, turn the ring
backwards twice in succession.
Note: when the lights are switched
off automatically or when the dipped
headlamps are switched off manu-
ally, the front fog lamps, the rear fog
lamp and the side lights remain on
(turn the ring backwards to switch off
the front fog lamps. The side lights
then switch off).
Vehicles itted with a rear fog
lamp (ring B)
This only operates with the dipped /
main beam headlamps.
Note: when the lights are switched
off automatically, the rear fog lamp
and the dipped headlamps remain on
(turn the ring backwards to switch off
the rear fog lamp. The dipped head-
lamps and side lights then switch off).
The front fog lamps operate with
the side lights and the dipped head-
lamps.
Lights off
Front fog lamps and rear
fog lamp
Rotate the ring forwards to switch on
and backwards to switch off. The sta-
tus is conirmed by the indicator light
on the instrument panel.
Lights on reminder
With the ignition off and the auto-
matic lighting function switched off,
when the driver's door is opened, a
buzzer sounds if you have left your
lights on.
Front and rear lights
Selection is by turning ring A.
VISIBILITY
64 -
"Follow me home" lighting
When you leave your vehicle, the
side lights and dipped headlamps
can be left on for approximately
30 seconds.
To do this:
-
place the key in the STOP
position,
-
place the lights stalk in the 0
position,
- lash the headlamps,
-
get out of the vehicle and lock it.
AUTOMATIC SWITCHING ON
OF LIGHTS
The side lights and dipped beam
headlamps switch on automatically if
the light is poor and when the wind-
screen wipers operate continuously
and switch off when the light becomes
bright enough or the windscreen wip-
ers are switched off.
In foggy weather or in snow, the
brightness sensor can detect sufi-
cient light, the lights will not come
on automatically. If necessary,
the dipped headlamps must be
switched on manually.
This function is active when the vehi-
cle is supplied to the customer.
To disarm or activate the function:
-
Place the key in the accessories
position (1st notch),
-
Place the lights stalk in the
AUTO/0 position,
-
Press the end of the lights stalk
for more than four seconds.
Do not cover the brightness sen-
sor, coupled with the rain sensor,
located in the centre of the wind-
screen, behind the interior mirror.
It is used for automatic switching
on of the lights.
Operating check
In good or rainy weather,
both day and night, the
front fog lamps and the
rear fog lamp are dazzling
and are prohibited.
Do not forget to switch them off
when they are no longer needed.
Direction indicators
(lashers)
Left: downwards.
Right: upwards.
Disarming
The disarmed function is accompa-
nied by an audible signal.
When the driver uses the manual
lighting controls, the function is tem-
porarily disarmed.
If the brightness sensor does not
function correctly, the lights come
on accompanied by an audible signal
and a message on the multifunction
display.
Consult a PEUGEOT dealer.
Activation
The activated function is accompa-
nied by an audible signal and a mes-
sage on the multifunction display.
VISIBILITY
64 -
"Follow me home" lighting
When you leave your vehicle, the
side lights and dipped headlamps
can be left on for approximately
30 seconds.
To do this:
-
place the key in the STOP
position,
-
place the lights stalk in the 0
position,
- lash the headlamps,
-
get out of the vehicle and lock it.
AUTOMATIC SWITCHING ON
OF LIGHTS
The side lights and dipped beam
headlamps switch on automatically if
the light is poor and when the wind-
screen wipers operate continuously
and switch off when the light becomes
bright enough or the windscreen wip-
ers are switched off.
In foggy weather or in snow, the
brightness sensor can detect sufi-
cient light, the lights will not come
on automatically. If necessary,
the dipped headlamps must be
switched on manually.
This function is active when the vehi-
cle is supplied to the customer.
To disarm or activate the function:
-
Place the key in the accessories
position (1st notch),
-
Place the lights stalk in the
AUTO/0 position,
-
Press the end of the lights stalk
for more than four seconds.
Do not cover the brightness sen-
sor, coupled with the rain sensor,
located in the centre of the wind-
screen, behind the interior mirror.
It is used for automatic switching
on of the lights.
Operating check
In good or rainy weather,
both day and night, the
front fog lamps and the
rear fog lamp are dazzling
and are prohibited.
Do not forget to switch them off
when they are no longer needed.
Direction indicators
(lashers)
Left: downwards.
Right: upwards.
Disarming
The disarmed function is accompa-
nied by an audible signal.
When the driver uses the manual
lighting controls, the function is tem-
porarily disarmed.
If the brightness sensor does not
function correctly, the lights come
on accompanied by an audible signal
and a message on the multifunction
display.
Consult a PEUGEOT dealer.
Activation
The activated function is accompa-
nied by an audible signal and a mes-
sage on the multifunction display.
65
VISIBILITY -
WINDSCREEN WIPER
STALK
Front windscreen wiper with
automatic wipe
2
Fast wipe
(heavy rain).
1
Normal wipe
(moderate rain).
AUTO Automatic wipe.
0
Off.
â
Single wipe
(press downwards).
In the AUTO position, the wiping
speed is in proportion to the intensity
of the rainfall.
The command must be reactivated
whenever the ignition has been
switched off for more than one
minute:
-
move the stalk to any position,
-
then move it back to the required
position.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash
then the windscreen wipers operate
for a ixed period.
The headlamp wash is also activated,
if the headlamps are on.
Front windscreen wiper with
intermittent wipe
2 Fast wipe
(heavy rain).
1 Normal wipe
(moderate rain).
I Intermittent wipe.
0 Off.
â Single wipe
(press downwards).
In the Intermittent position, the wip-
ing speed is in proportion to the ve-
hicle speed.
VISIBILITY
66 -
Automatic windscreen
wipers
In the AUTO position, the windscreen
wipers operate automatically and
adapt their speed to the intensity
of the rainfall.
Do not cover the rain sen-
sor located on the wind-
screen behind the interior
mirror.
When using an automatic car
wash, switch off the ignition or
check that the wiper stalk is not in
the AUTO position.
In winter, it is advisable to wait
for the windscreen to completely
clear of ice before operating the
automatic wipe.
Rear screen wiper
Rear screen wash
Turn ring A
to the irst notch
for intermittent wiping.
If the ignition is switched
off, it is necessary to reac-
tivate the control each time. To do
this, move the stalk to any position,
then move it back to the required po-
sition.
Turn ring A
past the irst
notch; the screen wash then
the wiper operate for a ixed
period.
Operating check
Activation
Activation of the function is accom-
panied by a message on the multi-
function display.
In the event of malfunction, the
driver is informed by an audible sig-
nal.
In the AUTO position, the wind-
screen wiper will operate in intermit-
tent mode.
Contact a PEUGEOT dealer to have
the system checked.
Automatic rear screen wiper
When the windscreen wipers control
is activated and you engage reverse
gear, the rear screen wiper operates
intermittently.
Note: if you use a bicycle carrier,
consult a PEUGEOT dealer to have
this function deactivated or install a
speciic bicycle carrier approved by
PEUGEOT.
67
VISIBILITY -
TRIP COMPUTER
Pressing the button on the end of the
wash/wipe stalk enables the follow-
ing data to be displayed:
Display B
-
the range,
-
the distance travelled,
-
the average consumption,
-
the current consumption,
-
the average speed.
Zero reset
Press the stalk for more than two
seconds.
Range
This shows the distance that can still
be covered with the fuel remaining in
the tank.
Note : this igure may increase if
there is a change in the style of driv-
ing or the road surface, producing a
signiicant drop in current consump-
tion.
When the range is less than 20 miles
(30 km), three segments are dis-
played. After illing with fuel, the
range is displayed when it exceeds
60 miles (100 km).
If horizontal segments are displayed
for long periods instead of digits,
contact a PEUGEOT dealer.
Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.
Average consumption
This is the average fuel consumption
since the computer was last set to
zero.
Current consumption
This is the average quantity of fuel
consumed during the last few sec-
onds.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
Average speed
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
VISIBILITY
68 -
ELECTRIC WINDOWS
2. Passenger's electric window
switch.
REAR QUARTER LIGHTS
(3 DOOR)
To partially open the rear windows,
tilt lever then push the window.
Always remove the key
from the ignition when
leaving the vehicle, even
for a short time.
If an obstacle is detected when
operating the electric windows,
you must reverse the movement
of the window. To do this, press
the control concerned.
When the driver operates the pas-
senger electric window controls,
he must ensure that no one is pre-
venting correct closing of the win-
dows.
The driver must ensure that pas-
sengers use the electric windows
correctly.
Be aware of children when operat-
ing the windows.
This switch enables the rear windows
to be locked whatever their position.
A 1st press activates the control (the
indicator light on the button comes
on) and a 2nd press deactivates it
(the indicator light on the button goes
out).
Temporary disarming
of the rear windows
(child safety)
1. Driver's electric window
switch
-
Manual operation:
Press or pull switch 1 gently.
The window stops as soon as
the switch is released.
-
Automatic operation:
Press or pull switch 1
irmly.
One touch completely opens or
closes the window.
Automatic closing only operates
when the engine is running and only
on the driver's electric window.
3. Rear left electric window
switch.
4. Rear right electric window
switch.
69
VISIBILITY -
Manual interior mirror
The interior mirror has two positions:
-
day (normal),
-
night (anti-dazzle).
To change from one to the other,
push or pull the lever on the lower
edge of the mirror.
Manual exterior mirrors
Move the lever in all four directions
to adjust.
When the vehicle is parked, the ex-
terior mirrors can be folded back
manually.
Electric exterior
mirrors
Turn knob 1 to the right or to the left
to select the corresponding mirror.
Move knob 1 in all four directions to
adjust.
Objects observed in the
driver's and passenger's
mirrors are in reality closer
than they appear.
This must be taken into account to
judge correctly the distance of vehi-
cles approaching from behind.
Fold-back electric
mirrors
With the ignition on, turn knob 1 to
position A.
LAYOUT
70 -
HEADLAMP ADJUSTMENT
Depending on the load in your vehi-
cle, it is recommended that the head-
lamp beam is adjusted.
0. 1 or 2 people in the front
seats.
-. 3 people.
1. 5 people.
2. 5 people + maximum
authorised load.
3. Driver + maximum
authorised load.
Initial setting is position 0.
STEERING WHEEL HEIGHT
ADJUSTMENT
When stationary, lower the handle to
unlock the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.
HORN
Press one of the spokes of
the steering wheel.
71
LAYOUT -
COURTESY LIGHTS
Map-reading light (button B)
With the key in the accessories or ig-
nition on position, turn button B to the
left or to the right.
AREAS FOR TOLL CARDS/
CAR PARK TICKETS
The athermic windscreen has two
non-relective zones located either
side of the base of the interior mirror.
They are intended for afixing toll
cards and/or car park tickets.
SUN VISOR
The sun visors are itted with a vanity
mirror, with a concealing lap on the
driver's side.
Permanently off.
Permanently on when the
key is in the accessories po-
sition or with the ignition on.
Front courtesy light (button A)
In this position, it comes on
for about 30 seconds:
-
on unlocking the vehicle,
-
when opening a door,
-
when opening the tailgate and
the rear screen (206 SW),
-
on switching off the ignition.
It switches off on locking the vehicle.
The courtesy light lashes while driv-
ing if a door or the boot is not closed
correctly.
LAYOUT
72 -
GLOVE BOX
To open the glove box, lift the handle.
The light comes on when the cover
is opened.
1. Handbook pack storage.
2. Can holder.
3. Pen holder.
4. Spectacles storage.
5. Map storage.
6. Coin storage.
FRONT ASHTRAY
To empty, close the cover.
Pull the lug and release the ashtray
upwards.
LIGHTER
Press and wait a few moments until it
springs out automatically.
It is supplied with power with the igni-
tion key in the accessories position
(1st notch).
73
LAYOUT -
Luggage retaining net
Use the stowing rings on the boot loor
and on the back of the rear seat to
hook on your luggage retaining net.
There are several options for storing
the shelf:
-
either behind the front seats,
-
or behind the rear seat using the
luggage retaining net,
- or lat in the boot.
Rear parcel shelf
To remove the shelf:
-
unhook the two strings 1,
-
slightly raise the shelf, then
remove it.
BOOT LAYOUT
Retaining strap
A strap secured to the side of the
boot enables you to secure various
objects (cans, irst aid kit, etc.).
DRIVING
74 -
'PORSCHE TIPTRONIC
SYSTEM' AUTOMATIC
GEARBOX
The four speed automatic gearbox
offers a choice between the comfort
of integral automatic operation, en-
hanced by a sport and a snow pro-
gramme, or manual gear changing.
Gear selection gate
F Move the lever in the gate to
select a position.
The indicator light corresponding
to the position selected appears
on the instrument panel screen.
Park: to immobilise the vehicle and
to start the engine, with the hand-
brake on or off.
Reverse: to reverse (select this po-
sition with the vehicle stationary, en-
gine at idle).
Neutral: to start the engine and to
park, with the handbrake on.
If position N is inadvertently engaged
while driving, allow the engine to re-
turn to idle before engaging position
D to accelerate.
Drive: for driving in automatic mode.
Manual: for selection of gears.
S : sport programme.
T : snow programme.
Moving Off
With the engine running, to move off
from position P:
F it is essential to press the
brake pedal to exit position P,
F select position R, D or M, then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
You can also move off from position N:
F release the handbrake, with your
foot on the brake,
F select position R, D or M, then
gradually release the pressure
on the brake pedal; the vehicle
moves off immediately.
Starting the engine
F with the handbrake on, select
position P or N in the gate,
F turn the ignition key to the Start
position.
WARNING
When the engine is at idle, brakes not
applied, if position R, D or M is se-
lected, the vehicle moves even with-
out the accelerator being pressed.
For this reason, do not leave chil-
dren unsupervised inside the ve-
hicle, with the engine running.
When maintenance operations need
to be carried out with the engine run-
ning, apply the handbrake and select
position P.
75
DRIVING -
Automatic operation
Automatic changing of the four
gears:
F select position D in the gate.
The gearbox always selects the most
suitable gear according to the follow-
ing parameters:
- the road proile,
-
the vehicle load.
The gearbox is then operating in
auto-adaptive mode, without any ac-
tion on your part.
If you take your foot off the accel-
erator suddenly, the gearbox will not
change to a higher gear for reasons
of safety.
Manual operation
Manual changing of the four gears :
F select position M in the gate,
F push the lever to the + sign to
change to a higher gear,
F pull the lever to the - sign to
change to a lower gear.
You can change from position D
(driving in automatic mode) to posi-
tion M (driving in manual mode) at
any time.
WARNING
Never select position N when the ve-
hicle is moving.
Never select positions P or R unless
the vehicle is stationary.
Never change between positions to op-
timise braking on a slippery surface.
Notes
For immediate maximum accelera-
tion without touching the gear lever,
press the accelerator pedal down as
far as it will go (kickdown). The gear-
box will automatically change down
or maintain the gear selected until
maximum engine speed is reached.
When the brake is applied, the gear-
box will automatically change down
in order to provide eficient engine
braking.
Sport and snow programmes
In addition to the auto-adaptive pro-
gramme, there are two special pro-
grammes.
The programme is displayed on the
instrument panel screen.
Sport programme
F Press button S once the engine
has been started.
The gearbox automatically favours
sporty driving and more dynamic ac-
celeration.
Snow programme
This programme improves starting
and drive when traction is poor.
F Press button T once the engine
has been started.
The gearbox adapts to driving on
slippery roads.
Note: you can return to the auto-
adaptive programme at any time.
F Press button S or T again to
switch off the programme you
are in.
Notes
It is only possible to change from one
gear to another if the vehicle speed
and engine speed permit. If they do
not, the vehicle will operate tempo-
rarily in automatic mode.
When the vehicle is stationary or
moving very slowly, the gearbox au-
tomatically selects gear M1.
Programmes S (sport) and T (snow)
do not operate in manual mode.
DRIVING
76 -
HANDBRAKE
Operating abnormality
Any operating abnormality is indi-
cated by an audible signal, accom-
panied by the message 'Automatic
gear fault' on the multi-function dis-
play, by a "-"
and lashing of the
Sport and Snow warning lights on the
instrument panel display.
In this situation the gearbox oper-
ates in downgrade mode (locked in
3rd gear). You may feel a substan-
tial knock when changing from P to
R and from N to R (this will not cause
any damage to the gearbox).
Do not exceed 60 mph (100 km/h),
respecting local speed limits.
Consult a PEUGEOT dealer.
If the battery is lat and the
lever is in position P, it will
be impossible to change
to another position.
In particular, do not force the lever
or there is a risk the gearbox may
be damaged.
When the vehicle is be-
ing driven, illumination of
this warning light and of the
STOP warning light, accom-
panied by an audible signal
and a message on the multifunction
display, indicates that the handbrake
is still on or has not been properly
released.
When parking on a slope,
direct your wheels to im-
mobilise them against the
pavement, pull the hand-
brake and engage a gear.
Applying
Pull the handbrake to immobilise
your vehicle.
Releasing
Pull on the handle and press the but-
ton to release the handbrake.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст