Peugeot 4007 (2012 year). Manual — part 3
1
INSTRUMENTS and CONTROLS
The total distance is dis-
played in zone 1 of the
screen and the trip dis-
tance in zone 2 (refer to
the "Distance recorders"
section).
Distance recorder (A and B)
INFORMATION ON T
INFORMATION ON THE
INSTRUMENT PANEL SCREEN
Information display
With the ignition on, press the INFO but-
ton, located on the fascia to the left of the
instrument panel, to display the various
types of information in succession:
- distance
recorder
A,
-
distance recorder B,
- service
indicator,
- coolant
temperature,
- range,
- trip
computer,
- setting
menu.
This displays the dis-
tance and the number
of months remaining be-
fore the next service, in
line with the manufactur-
er's servicing schedule
(refer to the "Service in-
dicator" section).
Service indicator
When the engine is run-
ning, this indicates the
temperature of the cool-
ant (refer to the "Coolant
temperature indicator"
section).
Coolant temperature
When the engine is run-
ning, this indicates the
number of miles (kilo-
metres) which can still
be travelled with the fuel
remaining in the tank,
based on the average
fuel consumption over
the last few miles (kilometres) travelled
(refer to the "Range" section).
Range
This indicates the aver-
age fuel consumption,
the average speed and
the current fuel con-
sumption (refer to the
"Trip computer" section).
Trip computer
When the vehicle is
stationary , this allows
the user to change the
following settings (refer
to the "Setting menu"
section):
- the display language,
- the temperature dis-
play units,
-
the fuel consumption units,
-
the option to reinitialise the average
fuel consumption and the average
speed,
- the break (rest) reminder display
interval.
Setting menu
1
INSTRUMENTS and CONTROLS
The total distance is dis-
played in zone 1 of the
screen and the trip dis-
tance in zone 2 .
DISTANCE RECORDERS (A/B)
System for measuring the total distance
travelled by the vehicle during its ser-
vice life and the distance travelled in
a day or other period until it is reset to
zero by the driver.
Zero reset
With the ignition on, press the
INFO
button for more than 2 seconds until
zeros appear.
When the engine is run-
ning, this indicates the tem-
perature of the coolant.
COOLANT TEMPERATURE
If the bar is close to the critical position
located on the right, the temperature is
too high.
The symbol fl ashes when your engine
is overheating.
You must stop your vehicle as soon
as it is safe to do so.
Wait a few minutes before switching
off the engine.
Wait for the engine to cool be-
fore topping up the level. The
cooling system is pressurised.
When the engine is
running , this indicates
the distance which can
still be travelled with
the fuel remaining in the
tank based on the aver-
age fuel consumption
over the last few miles/
kilometres travelled.
RANGE
GE
When the range is less than 30 miles
(50 km) , dashes are displayed.
Refuel as soon as possible. The display
of the range is updated.
To avoid any risk of scalding,
unscrew the cap by two turns to
allow the pressure to drop.
When the pressure has dropped,
remove the cap and top up the
level, if necessary.
Contact a PEUGEOT dealer or
a qualifi ed workshop.
This fi gure may increase fol-
lowing a change in the style of
driving or the relief, resulting in
a reduction in the current fuel
consumption.
If you only add a few litres, the
value displayed will be incorrect.
Therefore, you must fi ll the tank
whenever possible.
When you disconnect the bat-
tery, the previous fuel consump-
tion data is lost and the value
displayed will be different from
that displayed before the battery
was disconnected. The distance
displayed must be considered
an approximate indication.
1
INSTRUMENTS and CONTROLS
SERVICE INDICATO
SERVICE INDICATOR
Resetting the service indicator
to zero
Your PEUGEOT dealer or a qualifi ed
workshop carries out this operation after
each service.
If you have carried out your vehicle's
service yourself, the zero reset proce-
dure is the following:
) switch off the ignition.
) press the INFO button several times
in succession until the service indi-
cator is displayed.
) press and hold the INFO button for
a few seconds until the
spanner
fl ashes .
) press the
INFO button while the
spanner is fl ashing to change the
display "---" to "CLEAR" then the
time remaining before the next ser-
vice is due is displayed.
Service overdue
Operation
When the ignition is switched on, you
must press the
INFO button several
times in succession until the service
indicator is displayed. The distance re-
corder display line indicates the number
of miles (kilometres) remaining and the
time elapsed line indicates the number
of months remaining before the next
service is due.
After a certain distance and a
certain time, the display of "---" is
reinitialised and the display indi-
cates the time remaining before
the next service is due.
System which informs the driver when
the next service is due in accordance
with the manufacturer's servicing
schedule.
The point at which the next service is
due is calculated from the last service
indicator zero reset.
It is determined by two parameters:
-
the distance travelled (in miles (km)),
- the time elapsed since the last ser-
vice (in months).
The distance remaining to be travelled
may be weighted by the time factor, de-
pending on the user's driving habits.
Example: the display indicates that
7300 miles (kilometres) remain before
the next service is due.
The symbol
"--" remains dis-
played until the fi rst service of
a new vehicle has been carried
out.
Example: the display indicates that the
service is overdue. This service must
be carried out by a PEUGEOT dealer
or a qualifi ed workshop.
Each time the ignition is switched on,
the display "PERIODIC INSPECTION"
is displayed for a few seconds to indi-
cate that the service must be carried
out without delay.
1
INSTRUMENTS and CONTROLS
TRIP COMPUTER
Average fuel
consumption
(l/100 km or km/l or
mpg)
This is the average fuel
consumption since the
last zero reset.
This fi gure may change follow-
ing a change in the style of driv-
ing or the relief resulting in an
increase or decrease in the cur-
rent fuel consumption.
Average speed (km/h
or mph)
This is the average
speed calculated since
the last zero reset.
Resetting the information to zero
When the ignition is switched on, the
zero reset switches automatically from
manual mode to automatic mode.
If dashes "---" are displayed
for long periods in place of the
digits while driving, contact a
PEUGEOT dealer or a qualifi ed
workshop.
Current fuel
consumption
(l/100 km or km/l or
mpg)
This is the average fuel
consumption during the last
few seconds of driving.
Information display
With the ignition on, press the
INFO
button on the dashboard, to the left of
the instrument panel, several times in
succession to display the different infor-
mation:
-
average fuel consumption,
- average
speed,
-
current fuel consumption.
When the required information is dis-
played, press the INFO button for more
than two seconds to reset all of the in-
formation to zero.
Automatic
If the ignition key remains in the OFF
position for more than 4 hours, the in-
formation is reset to zero automatically.
1
INSTRUMENTS and CONTROLS
When the vehicle is
stationary , it allows the
user to change the fol-
lowing settings:
- the choice of the reini-
tialisation of the aver-
age fuel consumption
and average speed,
-
the fuel consumption units,
-
the temperature display unit,
-
the display language,
- activation/deactivation of the INFO
button sound,
-
the break (rest) reminder display in-
terval,
-
restore the factory settings.
SETTING MENU
SETTING MENU
System which provides access to the
settings for certain functions.
The various menus may change be-
tween the type 1 instrument panel and
the type 2 instrument panel.
With the ignition on , press the INFO
button on the dashboard, to the left of
the instrument panel, several times in
succession until the "SETTING MENU"
screen is displayed.
To change the settings, you
must stop the vehicle and switch
on the ignition.
Apply the parking brake and
place the gear lever in neutral.
When the vehicle is moving ,
the function settings are not
displayed when you press the
INFO button.
Operation
) press and hold the INFO button for
a few seconds to display the menu
screen.
Press and hold the INFO button
for a few seconds to return to
the previous screen.
When the menu screen is
displayed, if no operation is
carried out within 15 seconds,
the Setting Menu screen is dis-
played.
) on the menu screen, press the INFO
button to select a function from the
list:
MENU 2/3:
-
a/b (option of displaying a different
language on the instrument panel
screen and the navigation screen),
-
activation/deactivation of the
INFO button sound ,
-
ALERT (changing of the "BREAK
REMINDER" display interval),
-
selection of the sound of the di-
rection indicators,
-
activation/deactivation of the cur-
rent fuel consumption ,
MENU 1/3 :
-
1 - 2 (choice of the type of reinitiali-
sation of average fuel consumption
and average speed),
-
UNIT (choice of the fuel consumption
units),
- choice of the temperature display
unit ,
-
LANGUAGE (option of the display
language),
MENU 3/3:
-
REINITIALISE (restore factory set-
tings).
1
INSTRUMENTS and CONTROLS
Choice of the fuel consumption
units
You can choose between different units
for displaying fuel consumption.
On the menus screen:
) press the
INFO button to select
"UNIT" .
) press and hold the INFO button for
a few seconds to display the "UNIT"
screen.
) press the INFO button to scroll the
units (km/L, L/100 km, mpg (US),
mpg (UK) and PREVIOUS) in suc-
cession.
) press and hold the INFO button for
a few seconds to confi rm your se-
lection.
In this case, the distance, speed and
quantity of fuel units will also be changed
in accordance with your choice of fuel
consumption unit.
If the battery is disconnected,
the settings memory is cleared
and the default unit (km/L) is re-
stored automatically.
Choice of the temperature
display unit
You can choose between different units
for displaying the temperature.
On the menu screen:
) press the INFO button to se-
lect the temperature unit set-
ting symbol (thermometer).
) press and hold the INFO button for
a few seconds to scroll the units
(°C and °F) in succession.
The mode selected is confi rmed.
If the battery is disconnected,
the settings memory is cleared
and the default unit (°C) is re-
stored automatically.
Choice of the reinitialisation of
the average consumption and
average speed
You can choose between two average
fuel consumption and average speed
reinitialisation modes:
- automatic
reinitialisation
( choice 1) ,
-
manual reinitialisation (choice 2) .
On the menu screen:
) press the INFO button to select:
) press and hold the INFO button for
a few seconds to switch in succes-
sion from reinitialisation mode 1 (au-
tomatic) to reinitialisation mode
2
(manual) .
The mode selected is confi rmed.
1
INSTRUMENTS and CONTROLS
Choice of the display language
On the menu screen:
) press the
INFO button to select
"LANGUAGE" .
) press and hold the
INFO button
for a few seconds to display the
"LANGUAGE" screen.
) press the
INFO button to scroll
the languages (Japonais, English,
Deutsch, Français, Espanol, Italiano,
"---" and PREVIOUS) in succes-
sion.
) press and hold the INFO button for
a few seconds to confi rm your se-
lection.
If you select the "---" setting, no
message will be displayed in
message display situations.
If the battery is disconnected, the
settings memory is cleared and
the default language (ENGLISH)
is restored automatically.
Activation/deactivation of the
"INFO" button sound
You can activate or deactivate the INFO
button sound.
On the menu screen:
) press the INFO button to se-
lect the INFO button sound
activation/deactivation sym-
bol (located on menu 2/3) .
) press and hold the INFO button for
a few seconds to scroll the choices
(ON, OFF) in succession.
The mode selected is confi rmed.
If the battery is disconnected,
the settings memory is cleared
and the default choice (ON) is
restored automatically.
Changing the display interval
of the "BREAK REMINDER"
message
On the menu screen:
) press the
INFO button to select
"ALERT" (located on menu 2/3) .
) press and hold the
INFO button
for a few seconds to display the
"ALERT" screen.
) press the
INFO button to select
the display interval of the "BREAK
REMINDER" message.
) press and hold the INFO button for
a few seconds to confi rm.
If the battery is disconnected,
the settings memory is cleared
and the default value (OFF) is
restored automatically.
You can choose between different lan-
guages for the display.
You can change the display interval of
the "BREAK REMINDER" message.
1
INSTRUMENTS and CONTROLS
Selection of the sound of the
direction indicators
You can select the sound of the direction
indicators, with the type 2 instrument
panel only.
On the menu screen:
) press the
INFO button to select
sound 1 or 2 (located on menu 2/3) .
Activation/deactivation of the
current fuel consumption
You can activate or deactivate the cur-
rent fuel consumption, with the type 2
instrument panel only.
On the menu screen:
) press the INFO button to select the
current fuel consumption activation/
deactivation symbol
(located on
menu 2/3) .
Restoring factory settings
(REINITIALISE)
You can restore all of the factory set-
tings for all functions.
Functions
Factory setting
Reinitialisation
of average fuel
consumption and
average speed
1 (automatic)
Fuel consumption
units
L/100 km
Temperature
display unit
°C
Display language
ENGLISH
INFO button
sound
ON (activated)
Display of
the "BREAK
REMINDER"
message
OFF (deactivated)
On the menu screen:
) press the
INFO button to select
"REINITIALISE"
(located on
menu 2/2 or 3/3 depending on the
instrument panel) .
) press and hold the INFO button for
at least 5 seconds .
An audible signal is heard and all of the
factory settings are restored for all func-
tions.
) press and hold the INFO button for
a few seconds to scroll through the
choices in succession (ON, OFF).
The factory settings are:
1
INSTRUMENTS and CONTROLS
MONOCHROME SCR
CHROME SCREEN
This provides the following information:
- the
time,
- audio system information (refer to
the "Audio and Telematics" section).
Setting the time
The digital clock can be set in automatic
mode or in manual mode .
Selecting the Setting
Select the
automatic mode or the
manual mode as follows:
) Press button A "PWR" to switch on
the audio system.
) Access the setting mode by press-
ing button
B "TUNE" for approxi-
mately 2 seconds.
) Press button
B "TUNE" several
times to scroll through the various
menus and select the
CT menu
(clock time).
The order of the menus is the
following: AF/CT/REG/TP-S/PTY
display language/SCV/PHONE/
Functions setting mode OFF.
Automatic mode
This mode permits automatic setting
of the local time using the signal from
RDS stations.
The symbol
"CT" appears on the
screen.
Manual mode
This mode permits manual setting of
the time using the audio equipment but-
tons.
It can also be used when the "Automatic
mode" displays an inaccurate time,
when the local RDS stations are broad-
casting from a different time zone.
1
INSTRUMENTS and CONTROLS
Set the time using the buttons as indi-
cated below:
) with the ignition on or in the ACC
(Accessories) position, press and
hold the
CLOCK button until the
time display fl ashes.
) Press the appropriate button to set
the time:
Button H: to set the hours
The hours digits scroll when you press
this button.
Button M: to set the minutes
The minutes digits scroll when you
press this button.
Button 00: to reset the minutes to
zero.
- from
1 to 29 min : rounded down to
the previous hour,
- from
30 to 59 min: rounded up to
the next hour.
) After setting the time, press the
DISP button; the time display stops
fl ashing.
Manual mode
Automatic mode
In this mode, setting is automatic using
the signal from the RDS radio stations.
The digital clock does not dis-
play seconds.
When the "minutes" display is
set or reset to zero, the clock
starts at the zero second of the
minute selected.
The time setting is lost if the bat-
tery is disconnected.
) Turn button
B "TUNE" to the left or
to the right to select "CT ON" (auto-
matic mode) or "CT OFF" (manual
mode).
) After selecting the mode, you can
exit the "Functions setting mode"
menu by pressing button B "TUNE"
for approximately 2 seconds.
If no action is carried out within
10 seconds, the system will exit
the "Functions setting mode"
menu automatically.
1
INSTRUMENTS and CONTROLS
COLOUR SCREEN
COLOUR SCREEN
This permits display of the following
main menus:
On the control panel, press button
B
(SET) to access the "Settings" screen
and select:
-
"Display Off" to switch off the dis-
play,
-
"Sound control" for the sound dis-
tribution or volume, the type of music
and the sound fi eld (surround),
-
"Picture control" to set the colour,
the intensity, the brightness, the
contrast and the level of black,
-
"System" to change the time zone,
the language, the units and other
settings,
-
"Wide Screen" to change the size
of the DVD picture to 4/3 format,
wide screen mode, centred wide
screen mode or enlargement,
-
"Equipment" to set certain equip-
ment offered in the vehicle,
-
"Colour Contrast" to select the
contrast of the display in relation
to the ambient light (Day, Night or
Auto),
-
"TP standby" to activate or deacti-
vate the traffi c information.
"Audio-video" menu
"Navigation-guidance" menu
On the control panel, press button
A
(MODE) to access the
"AV mode"
screen and select:
-
radio (FM, MW, LW),
-
CD (audio, MP3 or WMA),
- Music
Server,
- DVD.
"Settings" menu
On the control panel, press button
C
(MENU) to access the "Menu" screen
and select:
-
"Address/Junction" to search for
a location using the address or the
name of the street,
-
"POI name" to search for a location
using the name of a point of interest
(POI),
-
"Advanced search" to search for a
location using an advanced search
based on a POI,
-
"Previous 20" to search for a loca-
tion using one of the 20 previous
destinations,
-
"Address book" to search for a lo-
cation using a stored address,
-
"Home" to navigate to your home
address,
-
"Navigation settings" to set func-
tions linked with the navigation,
-
"Navigation tools" to access the
basic information or a pre-set demon-
stration.
The "CD" and "DVD" buttons
are active if you insert a CD or
DVD in the player.
1
INSTRUMENTS and CONTROLS
Setting the time
The digital clock is set automatically .
This mode enables the system to set
the local time automatically using the
signal from the RDS stations.
) On the control panel, press button B
(SET) to access the "Settings" menu.
) On the touch screen, press button B
to access the "System" menu.
The system settings screen is dis-
played.
"Info" menu
On the control panel, press button
D
(INFO) to access the "Info" screen and
consult:
-
"Support info" to display the soft-
ware and data versions,
-
"Vehicle position" to display the
GPS location of the vehicle,
-
"Calendar" to make a note of
events, birthdays, etc.,
-
"Journey" to display the average
speed, fuel consumption, distances
and driving time,
-
"Environment" to display the alti-
tude, the atmospheric pressure, the
exterior temperature (the ice symbol
is displayed if there is a risk of ice),
-
"Air conditioning" to display the
information relating to the air condi-
tioning,
-
"Mobile phone" to enter a number,
delete a character, make or receive
a call.
"Route" menu
On the control panel, press button
E
(NAVI) to access the
"Route Menu"
screen and select:
-
"Detour" to make a detour through
a specifi ed region,
-
"Itinerary" to change the route,
-
"View route" to display a route in
different ways,
-
"Delete route" to delete a route,
-
"Nearby POI" to search for the
POIs in the surrounding area.
1
INSTRUMENTS and CONTROLS
1. RDS Auto Correct:
Activate/deactivate automatic ad-
justment.
2. GMT/GMT+1/GMT+2
Select the time zone.
3. Summer Time:
Summer time On/Off.
) Press button D to confi rm and re-
turn to the previous menu.
) Press button C to access the "Time"
menu .
You must deactivate automatic
adjustment (RDS Auto Correct)
to change the time zone and
summer time settings.
On each screen, you can return
to the previous screen by press-
ing button D "Return" .
Once this menu has been selected, you
can access the following functions:
LIGHTING RHEOSTAT
With the lighting on or off, press the but-
ton to change the intensity of the light-
ing of the instruments and controls in
"day" or "night" mode.
When the lighting reaches the maxi-
mum setting, press again to change to
the minimum setting.
When the lighting reaches the required
intensity, release the button.
The setting is saved when the ignition
switch is turned to OFF.
An audible signal is heard and the
intensity of the lighting increases
each time the button is pressed.
System for manual adjustment of the
brightness of the instruments and con-
trols in relation to the exterior bright-
ness.
2
COMFORT
For even air distribution, take care not
to obstruct the exterior air intake grille
located at the bottom of the windscreen,
the vents, the air outlets under the front
seats and the air extractor located be-
hind the fl aps in the boot.
The water formed by the air conditioning
condensation is discharged via an open-
ing provided for this purpose. Therefore,
a puddle of water may form underneath
the vehicle when stationary.
If the system does not produce cold air,
do not use it and have it checked by a
PEUGEOT dealer or a qualifi ed workshop.
AUTOMATIC REGULATION OF
ON OF
THE DIGITAL AIR CONDITIONING
Do not cover the temperature and
humidity sensor
2 and the sunshine
sensor 7 .
They are required for regulation of the
air conditioning.
Advice on operation
In hot weather, in order to obtain
intense ventilation, it is advis-
able to use vents 1 and 4 only.
If, when the vehicle has been
parked in the sun for a long time,
the interior temperature remains
very high, fi rst ventilate the pas-
senger compartment for a few
minutes.
Switch off the air conditioning
when the climatic conditions
permit.
Use of the automatic regulation of the
air conditioning is recommended. It per-
mits automatic and optimised control of
all of the following functions: air fl ow,
passenger compartment temperature
and air distribution, by means of various
sensors (ambient temperature, interior
temperature, sunshine), so preventing
the need for you to change your set-
tings other than the value displayed.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient in hot weather), switch-
ing off the air conditioning saves engine
power and therefore improves the tow-
ing capacity.
Close the windows to benefi t from the
full effectiveness of the air conditioning.
Ensure that the passenger compart-
ment fi lter is in good condition. Have
the fi lter elements replaced periodically.
If you drive in a dusty environment, re-
place it twice as often.
The air conditioning system does not
contain chlorine and is not harmful to
the ozone layer.
Operate the air conditioning system for
5 to 10 minutes, once or twice a month,
to keep it in good working order.
1. Central vents.
2. Temperature sensor.
3. Air outlet to passenger footwells.
4. Side vents.
5. Front window demisting/defrosting
vents.
6. Windscreen demisting/defrosting vents.
7. Sunshine sensor.
2
COMFORT
2
COMFORT
AUTOMATIC AIR
CONDITIONING
Automatic operation
) Set the temperature control dial 1 to
the temperature required.
) Place the air fl ow control dial 2 in
the "AUTO" position.
) Place the air distribution adjustment
dial 3 in the "AUTO" position.
When the engine is cold, to avoid
an excessive distribution of cold
air, the ventilation will reach its
optimum level gradually.
On entering the vehicle, the in-
terior temperature may be much
colder (or warmer) than the
comfort temperature. There is
no need to change the tempera-
ture displayed in order to reach
the comfort required rapidly.
The automatic regulation of the
air conditioning will operate to
correct the temperature difference
as quickly as possible.
1. Temperature adjustment
2. Air fl ow adjustment
3. Air distribution adjustment
4. Intake of exterior air/Recirculation of
interior air
5. Air conditioning On/Off
6. Rear screen demist/defrost
In automatic mode:
) when the temperature is set to maxi-
mum (Rapid heating), the intake of
exterior air is activated and the air
conditioning stops.
) when the temperature is set to mini-
mum (Rapid cooling), the air re-
circulation is activated and the air
conditioning operates.
The system controls the air distribu-
tion, the fl ow, the temperature and the
air intake to ensure the level of comfort
selected and adequate air circulation in
the passenger compartment. No further
action on your part is required.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст