Peugeot 308 SW BL (2013 year). Manual — part 21
319
06 USING THE TELEPHONE
CALLING A RECENTLY ENTERED NUMBER
Press TEL, select "Call list" and
confi rm,
Select the desired number and confi rm.
To erase the calls log, press PHONE twice, select " Phone
functions" and confi rm then select " Delete calls log" and
confi rm.
ENDING A CALL
Press PHONE then select "OK" to end
the call.
Or make a long press on TEL at the
steering mounted controls.
Or make two short presses on TEL at
the steering mounted controls.
Or press the MODE button, as many
times as necessary, until the telephone
screen is displayed.
press PHONE to display the calls log.
or
Press "OK" to display the contextual
menu then select " Hang up" and
confi rm.
320
06 USING THE TELEPHONE
RECEIVING A CALL
An incoming call is announced by a ring and a superimposed display
on the screen.
"Yes" to accept the call is selected by
default.
Press " OK" to accept the call.
Select " No" and confi rm to reject the
call.
A short press on TEL accepts an
incoming call.
A long press on TEL rejects an incoming
call.
321
06 USING THE TELEPHONE
OPTIONS DURING A CALL *
During a call, press the MODE button
several times to select display of the
telephone screen, then press " OK " to
open the contextual menu.
Select " Private mode " and confi rm to
take the call on the handset.
Or select " Hands-free mode" and
confi rm to take the call via the vehicle's
speakers.
Select " Put call on hold" and confi rm to
put the current call on hold.
Or select " Resume the call" and
confi rm to resume the call on hold.
Select " DTMF ring tones " to use the
numerical keypad, so as to navigate
through the menu of an interactive vocal
server.
Select " Hang up " to end the call.
* Depending on the compatibility of the phone and your service plan.
it is possible to hold a 3-way conference
call by making 2 calls in succession*.
Select "Conference mode call" in the
contextual menu accessible using this
button.
Or make a short press on this button.
322
06
Press PHONE twice.
Select " List of the paired peripherals"
and confi rm.
It is possible to:
-
"Connect" or " Disconnect " the
selected telephone,
-
delete the pairing of the selected
telephone.
It is also possible to select all pairings.
USING THE TELEPHONE
MANAGING PAIRED TELEPHONES
CHANGING THE RING TONE
Press PHONE twice.
Select " Phone functions " and confi rm.
Select " Ring options" and confi rm.
You can adjust the volume and the type
of ring tone.
Select " Bluetooth functions".
Select " OK " and confi rm to save the
changes.
323
07 RADIO
Access to the "RADIO" menu
""""""""FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM b
d
FM / AM b
d
FM / AM b
d
FM / AM b
d
FM / AM b
d""""""""
Press or or use the rotary control to select the
previous or next station in the list.
Go from the list to the menu (left/right).
or
Press RADIO.
324
07 RADIO
By alphabetical list
Press RADIO or LIST , select the station
of your choice and confi rm.
By automatic frequency search
Press
for a lower or higher radio frequency.
Or turn the thumb wheel at the steering
mounted controls.
By manual frequency search
Press or to adjust the radio
frequency step by step.
Press the button on the numerical keypad to recall a
preset station.
Or press then turn the thumb wheel at the steering
mounted controls.
SELECTING A STATION
The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode.
This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system.
PRESETTING A STATION
After selecting a station, press one of the buttons
on the numerical keypad for 2 seconds to preset the
current station.
An audible signal confi rms that the station has been
preset.
The quality of reception is represented by the number of
active waves in this symbol.
325
07
Press RADIO .
ACTIVATE / DEACTIVATE RDS
RDS, if activated, allows you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the entire country as radio stations do not
cover 100 % of the territory. This explains the loss of reception of
the station during a journey.
Select "Guidance options" and confi rm.
Select "Activate / Deactivate RDS " and
confi rm.
RADIO
Select " Activate / Deactivate RDS".
Radio displayed, press "OK " to display the contextual menu.
326
08 MUSIC MEDIA PLAYERS
Access to the "MUSIC MEDIA PLAYER" menu
""""""""MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA""""""""
Go from the list to the menu (left/right).
or
Press MUSIC.
327
08 MUSIC MEDIA PLAYERS
CD, MP3 CD / USB PLAYER
The audio equipment will only play audio fi les with ".wma, .aac, .fl ac,
.ogg and. mp3" fi le extensions and with a bit rate of between 32 Kbps
y
y
y p y
and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of fi le (.mp4, .m3u...) can be played.
WMA fi les must be of the standard wma 9 type.
The sampling rates supported are 11, 22, 44 and 48 KHz.
It is advisable to restrict fi le names to 20 characters, without using of
special characters (e.g.: " " ? ; ù) to avoid any playing and displaying
problems.
In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.
If the disc is recorded in another format it may not be played correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
INFORMATION AND ADVICE
The system supports USB mass storage or iPod
devices via the USB port (suitable cable not supplied).
Control of the peripheral device is with the audio
system controls.
Other peripherals, not recognised on connection, must
be connected to the auxiliary socket using a Jack cable
(not supplied).
In order to be read, a USB memory stick must be formatted FAT 16 or 32.
328
08 MUSIC MEDIA PLAYERS
Insert the CD in the player, insert the USB
memory stick in the USB player or connect the
USB peripheral to the USB port using a suitable
cable (not supplied)
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the fi rst
connection.
Reduce the number of non-music fi les and the
number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched off or connection of a USB memory
stick. However, the system memorises these
lists and if they are not modifi ed, the loading
time will be shorter.
Play starts automatically after a period which
depends on the capacity of the USB memory
stick.
SELECTION OF SOURCE
The SOURCE button on the steering mounted controls allows a
direct change to the next media source.
" CD / CD MP3 "
"USB, IPod"
"AUX "
"STREAMING "
"RADIO "
Press MUSIC to display the "MEDIA "
menu.
Select "Following media source " and
confi rm.
Repeat the operation as many times as necessary to obtain the
desired media source (except for radio which is accessible either
with SOURCE or RADIO).
SOURCES
329
08
/
/
/
/
/
/
/
+
/
/
/
SELECTING A TRACK
MUSIC MEDIA PLAYERS
Previous track.
Next track.
Previous folder.
Next folder.
Fast forward.
Fast backward.
Pause: long press on SRC.
MUSIC: List of USB or CD tracks or
folders
Up or down in the list.
Confi rm, next menu level.
Up one menu level.
Long press
Long press
330
08
AUDIO STREAMING
Streaming allows audio fi les on your telephone to be played via the
vehicle's speakers.
Connect the telephone: see "USING THE TELEPHONE".
Select " Audio" or " All" profi le.
If play does not start automatically, it may be necessary to start the
audio playback from the telephone.
Control is from the peripheral device or by using the audio system
buttons.
Once connected in streaming mode, the telephone is considered to be
a media source.
It is recommended that you activate " Repeat" on the Bluetooth
peripheral.
MUSIC MEDIA PLAYERS
CONNECTING APPLE
®
PLAYERS
®
Connect the Apple
®
player to the USB port using a suitable cable
(not supplied).
Play starts automatically.
Control is via the audio system.
The classifi cations available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The default classifi cation used is by artist. To modify the classifi cation
used, return to the fi rst level of the menu then select the desired
classifi cation (playlists for example) and confi rm to go down through
the menu to the desired track.
The version of software in the audio system may not be compatible
with the generation of your Apple
®
player.
The list of devices compatible with software versions is available from
PEUGEOT dealers.
331
08 MUSIC MEDIA PLAYERS
USING THE AUXILIARY INPUT (AUX)
JACK/RCA AUDIO CABLE NOT SUPPLIED
Connect the portable device (MP3, WMA player…) to the RCA audio
sockets (white and red) using a JACK-RCA audio cable.
Press MUSIC to display the " MUSIC"
menu.
Select "Activate / Deactivate AUX
input " and confi rm.
First adjust the volume of your portable
device (to a high level). Then adjust the
volume of your audio system.
Display and management of the controls are via the portable device.
332
09 AUDIO SETTINGS
They are accessible by the MUSIC
button in the control panel or by a long
press on RADIO according to the source
in use.
- "
Equalizer" (choice of 6 musical ambiences)
r
- "
Bass"
- "
Treble "
-
"Loudness" (Activate/Deactivate)
-
"Distribution" (" Driver ", "
r
All passengers ")
-
"Le-Ri balance " (Left/Right)
-
" Fr-Re balance " (Front/Rear)
- "
Auto. Volume " depending on road speed (Activate/Deactivate)
The audio settings (Equalizer,
r Bass , Treble and Loudness ) are
different and independent for each sound source.
The settings for distribution and balance are common to all sources.
The distribution (or spatialisation using the Arkamys
©
system) of sound
©
is an audio process that allows the audio quality to be adapted to the
number of listeners in the vehicle.
333
10
Press SETUP to display the
"Confi guration " menu.
Select " Choose colour" and confi rm to
r
select the screen colour harmony and
the map presentation mode:
-
day mode,
-
night mode,
- automatic
day/night mode,
according to whether the
headlamps are on.
Select " Adjust luminosity" and confi rm
to adjust the screen brightness.
Press " OK" to save the changes.
The settings for day and night are
independent.
Select " Display confi guration" and
confi rm.
DISPLAY CONFIGURATION
334
11 SCREEN MENU MAP
"Navigation - guidance"
MENU
Enter an address
Select destination
Directory
GPS coordinates (Archive)
Journey leg and route
Add a stage
Enter an address
Directory
Previous destinations
Order/delete journey legs
Divert route
Chosen destination
Guidance options
Defi ne calculation criteria
Set speech synthesis
Delete last destinations
Map management
Map orientation
Select TMC station
Automatic TMC
Manual TMC
List of TMC stations
Display / Do not display
messages
MAIN FUNCTION
option A1
option A2
OPTION A
OPTION B...
Map details
Move the map / "Vehicle monitoring"
Mapping and updating
Description of risk areas database
Stop / Restore guidance
"TRAFFIC" MENU
Geographic filter
Retain all the messages:
Retain the messages:
Around the vehicle
On the route
1
2
3
1
2
2
2
1
2
2
3
3
1
1
3
3
2
2
2
2
1
3
1
1
2
2
2
2
2
2
2
2
2
2
2
1
1
Set parameters for risk areas
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст