Peugeot 308 SW BL (2013 year). Manual — part 4
2
47
MULTIFUNCTION SCREENS
MONOCHROME SCREEN A
Controls
Displays in the screen
Displays according to context:
- time,
- date,
- ambient temperature with air condi-
tioning (the value displayed fl ashes
if there is a risk of ice),
- audio
functions,
- trip
computer,
- alert
messages,
- screen display and vehicle equip-
ment parameter settings menus.
Main menu
) Press the "MENU" button for access
to the main menu , then press the
" " or " " buttons to scroll through
the various menus:
- radio-CD,
- vehicle confi guration,
- options,
- display settings,
- languages,
- units.
) Press the "OK" button to select the
menu required.
From the control panel of your Peugeot
Connect Sound (RD5), you can:
) press the "MENU" button for access
to the main menu ,
) press the " " or " " buttons to scroll
through the items on the screen,
) press the "MODE" button to change
the permanent application (trip com-
puter, audio source...),
) press the "
" or "
" buttons to
change a setting value,
) press the "OK" button to confi rm,
or
) press the "ESC" button to abandon
the operation in progress.
Radio-CD
With the Peugeot Connect Sound (RD5)
switched on, once the "Radio-CD" menu
has been selected you can activate or
deactivate the functions linked with use
of the radio (RDS, REG), or CD (CD in-
troscan, shuffl e, repeat).
For more information on the "Radio-CD"
application, refer to the Peugeot Connect
Sound (RD5) section.
2
48
MULTIFUNCTION SCREENS
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
Screen display settings
Once the "Display settings" menu has
been selected, you can gain access to
the following settings:
- year,
- month,
- day,
- hour,
- minutes,
-
12 or 24 hour mode.
Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-Brasil,
Deutsch, English, Espanol).
Units
Once the "Units" menu has been se-
lected, you can change the units of the
following parameters:
-
temperature (°C or °F),
- fuel consumption (l/100 km, mpg or
km/l).
) Once you have selected a setting,
press the "
" or "
" buttons to
change its value.
) Press the "
" or "
" buttons to
switch respectively to the previous
or next setting.
) Press the
"OK" button to record
the change and return to the normal
display or press the "ESC" button to
cancel.
Vehicle confi guration
Options
Once the "Options" menu has been se-
lected, you can start diagnostics of the
status of the equipment (active, not ac-
tive, faulty).
Once the "Vehicle Confi guration" menu
has been selected, you can activate or
deactivate the following equipment:
- wiper linked with reverse gear (see
"Visibility"),
-
daytime running lamps (see "Visibility"),
-
rear parking sensors (see "Driving").
2
MULTIFUNCTION SCREENS
MONOCHROME SCREEN C
Main menu
Displays in the screen
Displays according to context:
- time,
- date,
- ambient temperature with air condi-
tioning (the value displayed fl ashes
if there is a risk of ice),
-
parking sensor information,
- audio
functions,
-
contacts and telephone information,
-
trip computer (with type 1 instrument
panel),
- alert
messages,
- screen display and vehicle equip-
ment parameter setting menus.
"Audio functions" menu
Controls
From the control panel of your Peugeot
Connect Sound (RD5), you can:
) press the "MENU" button for access
to the main menu ,
) press the " " or " " buttons to scroll
through the items on the screen,
) press the "MODE" button to change
the permanent application (trip com-
puter, audio source...),
) press the "
" or "
" buttons to
change a setting value,
) press the "OK" button to confi rm,
or
) press the "ESC" button to abandon
the operation in progress.
) Press the
"MENU" button for ac-
cess to the main menu :
- audio functions,
- diagnosis vehicle,
- personalisation-confi guration,
- telephone (Bleutooth system).
) Press the " " or " " buttons to se-
lect the menu required, then confi rm
by pressing the "OK" button.
With the Peugeot Connect Sound (RD5)
switched on, once this menu has been
selected you can activate or deactivate
the functions linked with use of the ra-
dio (RDS, REG, RadioText), or CD (CD
introscan, shuffl e, repeat).
For more information on the "Audio func-
tions" application, refer to the Peugeot
Connect Sound (RD5) section.
2
50
MULTIFUNCTION SCREENS
"Diagnosis vehicle"
menu
) Press the
"MENU" button for ac-
cess to the main menu.
) Press the arrows, then the
"OK"
button to select the " Diagnosis ve-
hicle " menu.
) On the " Diagnosis vehicle " menu,
select the following application:
Alert log
This summarises the active warning
messages, displaying them in succes-
sion on the multifunction screen.
Once this menu has been selected, you
can consult information concerning the
status of the vehicle, such as the alert log.
Defi ne the vehicle parameters
Once this menu has been selected, you
can activate or deactivate the following
equipment:
- wiper linked with reverse gear (see
"Visibility"),
- "guide-me-home" lighting (see "Vis-
ibility"),
-
interior mood lighting (see "Visibility"),
-
daytime running lamps (see "Visibility"),
-
rear parking sensors (see "Driving").
"Personalisation-
Configuration" menu
Once this menu has been selected, you
can gain access to the following func-
tions:
- defi ne the vehicle parameters,
- display
confi guration,
-
choice of language.
2
51
MULTIFUNCTION SCREENS
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
"Telephone" menu
Display confi guration
Once this menu has been selected, you
can gain access to the following set-
tings:
- brightness-video
setting,
-
date and time setting,
-
choice of units.
Choice of language
Once this menu has been selected,
you can change the language used by
the display (Deutsch, English, Espanol,
Français, Italiano, Nederlands, Portugues,
Portugues-Brasil, Russe, Türkçe * ).
Example: setting of the duration of the
"guide-me-home" lighting
) Press the " " or " " buttons, then
the "OK" button to select the menu
required.
) Press the "
" or "
" buttons,
then the "OK" button to select the
"Guide-me-home headlamps" line.
) Press the "
the value required (15, 30 or 60 sec-
onds), then press the "OK" button
to confi rm.
) Press the " " or " " buttons, then
the "OK" button to select the "OK"
box and confi rm or press the "ESC"
button to cancel.
With the Peugeot Connect Sound
(RD5) switched on, once this menu has
been selected you can confi gure your
Bluetooth system (pairing), consult the
various telephone directories (calls log,
services...) and manage your communi-
cations (pick up, hang up, call waiting,
secret mode...).
For more information on the "Tele-
phone" application, refer to the Peugeot
Connect Sound (RD5) section.
* According to country.
2
MULTIFUNCTION SCREENS
For operation of the retractable
screen (opening, closing, adjust-
ment of the position, etc.), refer
to the "Access to the retractable
screen" section.
Displays in the screen
Displays according to context:
- time,
- date,
- altitude,
-
ambient temperature (the value dis-
played fl ashes if there is a risk of
ice),
-
parking sensor information,
- audio
functions,
-
telephone and contacts information,
- satellite navigation system informa-
tion,
- alert
messages,
- menus for settings of the screen,
navigation system and vehicle
equipment.
From the navigation system control
panel, to select one of the applications:
) press the dedicated
"RADIO" ,
"MUSIC" ,
"NAV" ,
"TRAFFIC" ,
"PHONE" or
"SETUP" button for
access to the corresponding menu,
) turn dial A to select a function, an
item in a list,
) press button
B to confi rm the selec-
tion,
or
) press the "ESC" button to abandon
the current operation and return to
the previous display.
RETRACTABLE COLOUR
SCREEN (WITH PEUGEOT
CONNECT NAVIGATION (RT6))
Controls
For more information on these applica-
tions, refer to the "Audio and Telematics"
section.
2
53
MULTIFUNCTION SCREENS
) Press the "SETUP" button to gain
access to the confi guration menu:
- "Display confi guration",
- "Voice synthesis",
- "Choice of language",
- "Vehicle parameters",
- "Alert log".
Display confi guration
This menu allows you to choose a co-
lour scheme for the screen, to adjust
the brightness, set the date and time
and choose the units for distance (km or
miles), fuel consumption (l/100 km, mpg
or km/l) and temperature (°Centigrade
or °Fahrenheit).
When setting the time, you can
select "
Synchronise minutes
with GPS ", so that the minutes
are set automatically by satellite
reception.
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
Alert log
It lists the active alerts by displaying
their associated messages in turn.
Choice of language
This menu allows you to choose the
language used by the screen (French,
English, Italian, Portuguese, Spanish,
German, Dutch, Turkish, Polish, Russian).
Voice synthesis
This men allows you to adjust the vol-
ume for navigation instructions and to
choose the type of voice (male or fe-
male).
Vehicle parameters *
This menu allows you to activate or
deactivate certain driving and comfort
equipment, arranged by category:
- Parking
assistance
-
Operation of wipers
● Enagages rear wiper linked to
reverse (Rear wiper operates in
reverse gear; refer to "Visibility"),
- Lighting
confi guration (see "Vis-
ibility"):
● Duration of the guide-me-home
lighting,
●
Directional headlamps (main/
additional directional lighting),
●
Mood lighting (Interior mood
lighting),
● Daytime running lamps function ** .
"SETUP" menu
* Depending on version.
** According to country of sale.
2
54
MULTIFUNCTION SCREENS
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.
RETRACTABLE COLOUR SCREEN
(WITH PEUGEOT CONNECT
MEDIA NAVIGATION (NG4 3D))
Displays in the screen
Displays according to context:
- time,
- date,
- altitude,
-
ambient temperature (the value dis-
played fl ashes if there is a risk of
ice),
-
parking sensor information,
- audio
functions,
- telephone and address book infor-
mation,
- satellite navigation system informa-
tion,
-
display screen or navigation system
parameter settings menus.
From the Peugeot Connect Media Navi-
gation (NG4 3D) control panel, to select
one of the applications:
) press the dedicated "RADIO" , "ME-
DIA" , "NAV" , "TRAFFIC" , "ADDR
BOOK" or "SETUP" button for ac-
cess to the corresponding menu,
) turn dial A to select a function, an
item in a list,
) press button
B to confi rm the selec-
tion,
or
) press the "ESC" button to abandon
the current operation and return to
the previous display.
For operation of the retractable
screen (opening, closing, adjust-
ment of the position, etc.), refer
to the "Access to the retractable
screen" section.
For more information on these applica-
tions, refer to the Peugeot Connect Media
Navigation (NG4 3D) section.
Controls
2
55
MULTIFUNCTION SCREENS
"SETUP" menu
Language and speech
This menu allows you to:
- select the language used by the
display (Deutsch, English, Espanol,
Français, Italiano, Nederlands,
Polski, Portugues, Portugues-Brasil,
Türkçe * ),
-
select the voice recognition parame-
ters (activation/deactivation, advice
on use, personal voice program-
ming, etc.),
- set the volume of the voice synthe-
siser.
Date and time
This menu allows you to set the date
and time, the format of the date and the
format of the time.
Principle of GPS (GMT) synchronisation:
1. Confi
rm the selection "Synchronise
with GPS", the time is then aligned
with GMT universal time, the date is
updated as well.
2. Using the 4-direction navigator, move
the cursor onto the hours fi eld and
press on OK .
3. Using the rotating ring, you can then
adjust the time to the time zone of your
choice.
Note that in the case of a summer/win-
ter time change, the time zone must be
set again manually.
Display
This menu allows you to set the bright-
ness of the screen, the screen colour
scheme and the colour of the map (day/
night or auto mode).
Units
This menu allows you to select the
units: temperature (°C or °F) and dis-
tance (miles or km).
) Press the "SETUP" button to gain
access to the "SETUP" menu. This
allows you to select from the follow-
ing functions:
- "Language and speech",
- "Date and time",
- "Display",
- "Units",
- "System".
System
This menu allows you to restore the fac-
tory confi guration, display the software
version and activate scrolling text.
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.
* According to country.
2
56
MULTIFUNCTION SCREENS
This screen is opened and stored auto-
matically.
However, you can also open it, store it
and adjust it using the various manual
controls:
-
opening or storing by means of con-
trol A ,
-
angle adjustments by means of con-
trol B .
It is also fi tted with safety auto-reverse
protection.
Opening the screen
) With the screen stored, press con-
trol A to open it.
The screen opens automatically when
the ignition is switched on, when the au-
dio and telematics system is switched
on, when an outgoing telephone call is
made, when a voice command is given
and when a warning message linked with
the STOP warning lamp is received.
Closing the screen
) With the screen open, press con-
trol A to store it.
The screen is stored automatically
when the ignition is switched off, after
approximately three seconds, if the au-
dio and telematics system is off.
If you wish the screen to open or
close automatically when the audio
and telematics system is switched
on or off, the screen must not be
closed when the audio and tele-
matics system is operating.
When the screen is open, you can ad-
just it precisely in different ways:
) press the corresponding part of con-
trol B to move the screen towards
you or towards the windscreen,
or
) push or pull the screen gently by
hand.
Adjusting the position of the screen
Safety auto-reverse
If the screen meets an obstacle as it
opens or closes, the movement stops
immediately and is reversed by a few
millimetres.
After clearing the obstacle, issue the
command required again.
Storing the position of the screen
The system has four pre-set positions
in its memory.
Each time the screen is closed, the
system stores the last position of the
screen.
Each time the screen is re-opened, the
system returns the screen to the pre-set
position closest to that stored.
If you close the screen during op-
eration of the audio and telematics
system, it will re-open automatically
when an outgoing telephone call is
made, when a voice command is
given or when a warning message
linked with the STOP warning lamp
is received.
Access to the retractable screen
2
57
MULTIFUNCTION SCREENS
Monochrome screen A
) Press the button, located at the end
of the
wiper stalk , to display the
various items of trip computer infor-
mation in succession.
The trip computer provides the follow-
ing information:
Information displays
- range,
-
current fuel consumption,
-
Stop & Start time counter,
- distance
travelled,
-
average fuel consumption,
) The next press then returns you to
the normal display.
- average
speed.
Zero reset
) Press the control for more than two
seconds to reset to zero the distance
travelled, the average fuel consump-
tion and the average speed.
TRIP COMPUTER
System that gives you information on
the journey in progress (range, fuel con-
sumption…).
2
58
MULTIFUNCTION SCREENS
Display of information
) Press the up and down arrows on
the instrument panel navigator , as-
sociated with Peugeot Connect Me-
dia Navigation (NG4 3D), to cycle
through the information.
Monochrome screen C
Display of information with the
screen C or the small central screen
in the instrument panel
Large central screen with
type 3 instrument panel
Small central screen with
type 2 instrument panel
Depending on your vehicle's equip-
ment, the trip computer information
appears in the multifunction screen
or on the central screen in the in-
strument panel.
) Cycle through the information with
successive short presses on this
button.
Permanent display (
"MODE" button on the
Peugeot Connect Sound (RD5) control panel)
Temporary display in a new window.
2
59
MULTIFUNCTION SCREENS
-
The trip "2" tab with:
● the distance travelled,
● the average fuel consumption,
● the average speed.
) Pressing the button again takes you
to a black screen.
A further press returns you to the
normal display.
-
The current information tab,
for the trip in use, with:
● the range,
● the current fuel consumption,
● the distance remaining to
be travelled or the Stop &
Start counter.
-
The trip "1" tab with:
● the distance travelled,
● the average fuel consumption,
● the average speed.
Trip zero reset
) When the trip required is displayed,
press the button on the end of the
wiper stalk for more than two sec-
onds.
) When the required trip is displayed,
press the "OK" button on the instru-
ment panel navigator , associated with
Peugeot Connect Media Navigation
NG4 3D), for more than two seconds.
With the instrument panel large central
screen
Trips "1" and "2" are independent
but their use is identical.
For example, trip "1" can be used
for daily fi gures, and trip
"2" for
monthly fi gures.
The trip computer can display:
With the monochrome screen C or
the instrument panel small screen
2
MULTIFUNCTION SCREENS
A few definitions
(trip computer)
When the range falls below 20 miles
(30 km), dashes are displayed. After fi ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer
or a qualifi ed workshop.
This function is only displayed from
20 mph (30 km/h).
This value may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current fuel con-
sumption.
Range
(miles or km)
This indicates the distance
which can still be travelled
with the fuel remaining in the tank in
relation to the average fuel consump-
tion over the last few miles (kilometres)
travelled.
Current fuel consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption during the last few
seconds.
Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption since the last trip
computer zero reset.
Distance travelled
(miles or km)
This indicates the distance
travelled since the last trip
computer zero reset.
Average speed
(mph or km/h)
This is the average speed cal-
culated since the last trip com-
puter zero reset (ignition on).
Distance remaining to
destination
(miles or km)
This is the distance remaining
to be travelled to the fi nal destination. It
is either calculated instantly by the navi-
gation system, if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Stop & Start time counter
(minutes / seconds or hours /
minutes)
If your vehicle is fi tted with
Stop & Start, a time counter calculates
the time spent in STOP mode during a
journey.
It resets to zero every time the ignition
is switched on with the key.
3
61
COMFORT
VENTILATION
Air treatment
The incoming air follows various routes
depending on the controls selected by
the driver:
-
direct arrival in the passenger compart-
ment (air intake),
- passage through a heating circuit
(heating),
- passage through a cooling circuit
(air conditioning).
The temperature control enables you to
obtain the level of comfort required by
mixing the air of the various circuits.
The air distribution control enables you to
diffuse the air in the passenger compart-
ment combining several air vents.
The air fl ow control enables you to increase
or reduce the speed of the ventilation blower.
Air intake
The air circulating in the passenger com-
partment is fi ltered and originates either
from the outside via the grille located at
the base of the windscreen or from the
inside in air recirculation mode.
Control panel
The controls of this system are grouped
together on control panel A on the centre
console. Depending on the model, the
functions offered are:
-
level of comfort required,
- air
fl ow,
- air
distribution,
-
demisting and defrosting,
- manual or digital air conditioning
controls.
Air diffusion
1. Windscreen demisting vents.
2. Front side window demisting/defrosting
vents.
3. Side adjustable air vents.
4. Central adjustable air vents.
5. Air outlets to the front footwells.
6. Adjustable air vents for the rear passengers.
7. Air outlets to the rear footwells.
3
62
COMFORT
If after an extended stop in sunshine,
the interior temperature is very high,
fi rst ventilate the passenger com-
partment for a few moments.
Put the air fl ow control at a setting
high enough to quickly change the
air in the passenger compartment.
The air conditioning system does
not contain chlorine and does not
present any danger to the ozone
layer.
RECOMMENDATIONS FOR VENTILATION AND
AIR CONDITIONING
In order for these systems to be fully effective, follow the operation and main-
tenance guidelines below:
) To obtain an even air distribution, take care not to obstruct the exterior air
intake grilles located at the base of the windscreen, the nozzles, the vents
and the air outlets, as well as the air extractor located in the boot.
) Do not cover the sunshine sensor, located on the dashboard; this is used
for regulation of the digital air conditioning system.
) Operate the air conditioning system for at least 5 to 10 minutes, once or
twice a month to keep it in perfect working order.
) Ensure that the passenger compartment fi lter is in good condition and
have the fi lter elements replaced regularly (refer to the "Checks" section).
We recommend the use of a combined passenger compartment fi lter.
Thanks to its special active additive, it contributes to the purifi cation of
the air breathed by the occupants and the cleanliness of the passenger
compartment (reduction of allergic symptoms, bad odours and greasy de-
posits).
) To ensure correct operation of the air conditioning system, you are also
advised to have it checked regularly as recommended in the servicing
booklet.
) If the system does not produce cold air, switch it off and contact a PEUGEOT
dealer or a qualifi ed workshop.
When towing the maximum load on a steep gradient in high temperatures,
switching off the air conditioning increases the available engine power and so
improves the towing ability.
The condensation created by the
air conditioning results in a dis-
charge of water under the vehicle
which is perfectly normal.
Stop & Start
The heating and air conditioning systems only work when the engine is run-
ning. To maintain a comfortable temperature in the passenger compartment,
you can temporarily deactivate the Stop & Start system (see "Driving").
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст