KIA Soul EV (2018 year). Manual — part 2
20
• Comply with the following in order
to prevent electrical shock when
charging:
– Use a waterproof charger.
– Make sure to not touch the
charging connector and charg-
ing plug when your hand is wet.
Do not stand in water or snow
when connecting the charging
cable.
– Do not charge when there is
lightning.
– Do not charge when the charg-
ing connector and plug is wet.
PRECAUTIONS FOR CHARGING
ELECTRIC VEHICLE
WARNING
- Touching the
charging connector
Do not to touch the charging
connector, charging plug, and
the charging inlet when con-
necting the cable to the charger
and the charging inlet on the
vehicle. Doing so may result in
electrocution.
WARNING
- Charging
cable
• Immediately stop charging
when you find abnormal
symptoms (smell, smoke).
• Replace the charging cable if
the cable coating is damaged
to prevent electrical shock.
• When connecting or removing
the charging cable, make sure
to hold the charging connec-
tor handle and charging plug.
If you pull the cable itself
(without using the handle), the
internal wires may disconnect
or get damaged. This may lead
to electric shock or fire.
21
• Always keep the charging connec-
tor and charging plug in clean and
dry condition. Be sure to keep the
charging cable in a condition
where there is no water or mois-
ture.
• Make sure to use the designated
charger for charging the electric
vehicle. Using any other charger
may cause failure.
• Before charging the battery, turn
the vehicle [OFF].
• Be careful not to drop the charging
connector. The charging connec-
tor can be damaged.
PRECAUTIONS FOR CHARGING
ELECTRIC VEHICLE
WARNING
- Cooling fan
Do not touch the cooling fan
while vehicle is charging. When
the vehicle is switched [OFF]
while charging, the cooling fan
inside the motor compartment
may automatically operate.
22
We recommend using normal charg-
ing for usual charging of the vehicle.
■
■
How to Connect Normal
Charger
1. While the brake pedal is pressed,
engage the parking brake.
2. Turn OFF all switches, place the
shift lever in P (Park), and turn
OFF the vehicle.
3. Press the charging door open
switch [
] to open the charging
door. Charging door open switch
can be operated only when vehi-
cle is turned off.
4. If you cannot open the charging
door due to freezing weather :
1) Remove any ice near the charg-
ing door.
2) Pull the emergency cable to
open the charging door.
(When the charging door does not
open, refer to “How to Unlock
Charging Door in Emergencies.”)
CHARGING ELECTRIC VEHICLE
(NORMAL CHARGE)
Normal Charge
OPSE0Q4057N
OPSE0Q4011
■
Normal Charger
❈
❈
Shape of charger and how to use the charger may be different for each manufacturer.
23
5. Open the charging door and press
the normal charging inlet cover
release tab (1) to open the normal
charging inlet cover.
6. Before connecting the charging
connector, make sure the door
lock is released.
When the door is locked, the
charging connector lock system
will be triggered. And the charging
connector will not be connected.
7. Remove any dust on the charging
connector and charging inlet.
8. Hold the charging connector han-
dle and connect it to the vehicle
normal charging inlet. Push the
connector until you hear a "click-
ing" sound.
CHARGING ELECTRIC VEHICLE
(NORMAL CHARGE)
OPSE0Q4013
OPSE0Q4012
CAUTION
- Charging
Connector Door
To avoid damage to your vehi-
cle, do not attempt to connect
the charging connector to your
vehicle without first opening the
door to the charging connector.
24
9. Check if the charge indicator lamp
of the high voltage battery in the
instrument cluster is turned ON.
Charging is not done when the
charging indicator lamp is OFF.
When the charging connector is
not connected properly, reconnect
the charging cable to charge.
• You can start charging when the
Power button is in the OFF posi-
tion and the shift lever is in P
(Park). After charging has started,
you can use electrical compo-
nents such as the radio by press-
ing the Power button to the ACC or
ON position.
• If you move the shift lever from P
(Park) to R (Rear), N (Neutral), D
(Drive), charging stops immedi-
ately. If you want to start charging
again, place the shift lever to P
(Park) and press the Power button
to the OFF position. Unplug and
reconnect the charging cable to
start charging again.
10.After charging has started, the
estimated charging time is dis-
played on the instrument cluster
for about 1 minute.
If you open the driver seat door
while charging, the estimated
charging time is also displayed on
the instrument cluster for about 1
minute.
When reserved charging is set,
the estimated charging time is
displayed as “--" .
OPSE0Q4058L
CHARGING ELECTRIC VEHICLE
(NORMAL CHARGE)
OPSE047051C
25
Depending on the condition and
durability of the high voltage battery,
charger specifications, and ambient
temperature, the time required for
charging the battery may vary.
11.You may prevent possible charg-
ing cable theft by taking the fol-
lowing steps. Lock the door after
the charging cable is connected,
by pressing the lock button on the
smart key or on the central door
lock switch.
When the door is locked, the
charging connector will become
locked and this will prevent possi-
ble theft.
So, after charging is complete,
you must release the door lock in
order to disconnect the charging
connector.
■
■
Unlock Charging Door in
Emergency
If the charging door does not open
due to battery discharge and failure
of the electric wires, open the hood
and slightly pull the emergency cable
as shown above. The charging door
will then open.
CHARGING ELECTRIC VEHICLE
(NORMAL CHARGE)
OPSE0Q4016
26
■
■
Emergency Release of the
Charging connector lock
system
Use this function if the charging con-
nector lock does not unlatch even
after the door lock has been
released. You can release the charg-
ing connector lock system by using
the emergency release lever.
Open the hood, and then fully lift the
charging connector emergency
release cover after turning it. Then,
pull on the emergency release lever
to disconnect the charging connector.
■
■
Checking Charging Status
When charging the high voltage bat-
tery, the charge level can be checked
from outside the vehicle.
CHARGING ELECTRIC VEHICLE
(NORMAL CHARGE)
OPSE0Q4008
Operation of Charging
Indicator Lamp
Details
(1)
(2)
(3)
(OFF)
(OFF)
(OFF)
Not Charged
Blinking
(OFF)
(OFF)
Charging
0~33%
(ON) Blinking
(OFF)
34~66%
(ON)
(ON) Blinking
67~99%
(ON)
(ON)
(ON)
Charging complete
(100%)(turns OFF
in 3 seconds)
Blinking Blinking Blinking
Error while charging
/If charging cables
are connected when
the vehicle is in the
ready mode or the
POWER button is in
the ON position.
(OFF)
(OFF) Blinking
Charging 12 V aux-
iliary battery or
reserved air condi-
tioner is operating
(OFF) Blinking
(OFF)
Reserved charging
is operating
(turns OFF after 3
minutes)
OPSE075034
27
■
■
How to Disconnect Normal
Charger
1. Before disconnecting the charging
connector, make sure the door
lock is released. When the door is
locked, the charging connector
lock system will be triggered. And
the charging connector will not be
disconnected.
2. Hold the charging connector han-
dle and pull it while pressing the
release button (1).
3. Make sure to completely close the
normal charging inlet cover.
4. Make sure to completely close the
charging door.
CHARGING ELECTRIC VEHICLE
(NORMAL CHARGE)
OPSE0Q4034
OPSE0Q4015
CAUTION
In order to disconnect the
charging connector, release the
door lock to unlatch the charg-
ing connector lock system. If
not, the charging connector and
the vehicle's charging inlet may
be damaged.
CAUTION
- Disconnecting
charging plug
When disconnecting the charg-
ing connector, do not try to dis-
connect it by force while not
pressing the release button. This
may damage the charging con-
nector and vehicle charging inlet.
28
You can charge at high speeds at pub-
lic charging stations. Refer to the
respective company's manual that is
provided for each quick charger type.
Battery performance and durability can
deteriorate if the quick charge is used
constantly in hot weather conditions
(heat wave, etc.)
Use of quick charge in hot weather
condition should be minimized in order
to help prolong high voltage battery life.
❈
Shape of charger and how to use
the charger may be different for
each manufacturer.
❈
If you use a quick charger when
the vehicle is already fully
charged, some quick chargers will
send out an error message. When
the vehicle is fully charged, do not
charge the vehicle.
■
■
How to Connect Quick
Charger
1. While the brake pedal is pressed,
engage the parking brake.
2. Turn OFF all switches, place the
shift lever in P (Park), and turn
OFF the vehicle.
Quick Charge (if equipped)
CHARGING ELECTRIC VEHICLE
(QUICK CHARGE)
OPSE0Q4004
OPSE0Q4011
■
Quick Charger
29
3. Press the charging door open
switch [
] to open the charging
door. Charging door open switch
can be operated only when vehi-
cle is turned off.
4. If you cannot open the charging
door due to freezing weather :
1) Remove any ice near the
charging door.
2) Pull the emergency cable to
open the charging door.
(When the charging door does not
open, refer to “How to Unlock
Charging Door in Emergencies.”)
5. Open the charging door and press
the quick charging inlet release
tab (1) to open the quick charging
inlet cover.
6. Remove any dust or foreign sub-
stances inside the charging con-
nector and charging inlet.
7. Hold the charging connector han-
dle and connect it to the vehicle
quick charging inlet. Push the con-
nector until you hear a "clicking"
sound.
CHARGING ELECTRIC VEHICLE
(QUICK CHARGE)
OPSE0Q4017
OPSE0Q4018
30
❈
Refer to the manual for each type
of quick charger for how to charge
and remove the charger.
❈
The shape of the charging con-
nector may vary depending on the
manufacturer.
8. Check if the charge indicator lamp
of the high voltage battery in the
instrument cluster is turned ON.
Charging is not done when the
charging indicator lamp is OFF.
When the charging connector is
not connected properly, reconnect
the charging cable to charge it
again.
❈
If you use a quick charger when
the vehicle is already fully
charged, some quick chargers will
send out an error message. When
the vehicle is fully charged, do not
charge the vehicle.
CHARGING ELECTRIC VEHICLE
(QUICK CHARGE)
OPSE0Q4058L
31
❈
During cold weather, quick charg-
ing may not be available to prevent
high voltage battery degradation.
• You can start charging when the
Power button is in the OFF posi-
tion and the shift lever is in P
(Park).
After charging has started, you
can use electrical components
such as the radio by pressing the
Power button to ACC or ON posi-
tion.
• If you move the shift lever from P
(Park) to R (Reverse), N (Neutral),
D (Drive), charging stops immedi-
ately. If you want to start charging
again, place the shift lever to P
(Park) and press the Power button
to the OFF position. Unplug and
reconnect the charging cable to
start charging again.
■
■
Unlock Charging Door in
Emergency
If the charging door does not open
due to battery discharge and failure
of the electric wires, open the hood
and slightly pull the emergency cable
as shown above. The charging door
will then open.
■
■
Checking Charging Status
When charging the high voltage bat-
tery, the charge level can be checked
from outside the vehicle.
OPSE0Q4016
OPSE0Q4008
CHARGING ELECTRIC VEHICLE
(QUICK CHARGE)
32
Depending on the condition and
durability of the high voltage battery,
charger specifications, and ambient
temperature, the time required for
charging the battery may vary.
■
■
How to Disconnect Quick
Charger
1. Remove the charging connector
when quick charging is completed,
or after you stop charging using
the quick charger. Refer to each
respective quick charger manual
for details about how to discon-
nect the charging connector.
Operation of Charging
Indicator Lamp
Details
(1)
(2)
(3)
(OFF)
(OFF)
(OFF)
Not Charged
Blinking
(OFF)
(OFF)
Charging
0~33%
(ON) Blinking
(OFF)
34~66%
(ON)
(ON) Blinking
67~94%
Blinking Blinking Blinking
Error while charging
/If charging cables
are connected when
the vehicle is in the
ready mode or the
POWER button is in
the ON position.
OPSE0Q4019
CHARGING ELECTRIC VEHICLE
(QUICK CHARGE)
33
2. Make sure to completely close the
quick charging inlet cover.
3. Make sure to completely close the
charging door.
CHARGING ELECTRIC VEHICLE
(QUICK CHARGE)
OPSE0Q4020
CAUTION
- Disconnecting
charging plug
When disconnecting the charg-
ing connector, do not try to dis-
connect it by force while not
pressing the release button.
This may damage the charging
connector and vehicle charging
inlet.
34
Trickle Charge can be used when
Normal Charge or Quick Charge is
not available by using household
electricity.
■
■
How to Connect Portable
Charging Cable
(ICCB: In-Cable Control Box)
1. Connect the plug to a household
electric outlet.
2. Check if every LED lamp on the
control box is turned on for 0.5
seconds. Then, check if the power
lamp (green) turns ON.
Trickle Charge
CHARGING ELECTRIC VEHICLE
(TRICKLE CHARGE)
OPSE0Q4021
OPSE0Q4022N
Charging Connector
Charging Cable
Control Box
Code and Plug
(code set)
Plug
Electric Outlet
OPSE0Q4023
35
3. While the brake pedal is pressed,
engage the parking brake.
4. Turn OFF all switches, place the
shift lever in P (Park), and turn
OFF the vehicle.
5. Press the charging door open
switch [
] to open the charging
door. Charging door open switch
can be operated only when vehi-
cle is turned off.
6. If you cannot open the charging
door due to freezing weather :
1) Remove any ice near the charg-
ing door.
2) Pull the emergency cable to
open the charging door.
(When the charging door does not
open, refer to “How to Unlock
Charging Door in Emergencies.”)
7. Open the charging door and press
the normal charging inlet release
tab (1) to open the normal charg-
ing inlet cover.
8. Before connecting the charging
connector, make sure the door
lock is released.
When the door is locked, the
charging connector lock system
will be triggered. And the charging
connector will not be connected.
CHARGING ELECTRIC VEHICLE
(TRICKLE CHARGE)
OPSE0Q4011
OPSE0Q4012
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст