KIA Venga (2016 year). Manual — part 11
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 105
Features of your vehicle
FM reception
AM(MW) reception
FM radio station
Mountains
Buildings
Unobstructed
area
Iron bridges
JBM001
JBM002
JBM003
How car audio works
AM (MW) broadcasts can be received at
FM broadcasts are transmitted at high
greater distances then FM broadcasts.
frequencies and do not bent to follow the
AM (MW) and FM radio signals are
This is because AM (MW) radio waves
earth’s surface. Because of this FM
broadcast from transmitter towers locat-
are transmitted at low frequencies. These
broadcasts begin to fade at short dis-
ed around your city. They are intercepted
long low radio frequency waves can fol-
tances from the station. Also FM signal
by the radio antenna on your car. This
low the curvature of the earth rather then
are easily affected by buildings, moun-
signal is then received by the radio and
travelling straight out into the atmos-
tains or other obstructions. These can
sent to your speakers.
phere. In addition they curve around
result in certain listening conditions
When a strong radio signal has reached
obstructions so that they can provide bet-
which might lead you to believe a prob-
your vehicle the precise engineering of
ter signal coverage.
lem exists with your radio. The following
your audio system ensures the best pos-
conditions are normal and do not indicate
sible audio reproduction. However in
radio trouble.
some cases the signal coming to your
vehicle may not be strong an clear. This
can be due to factors such as the dis-
tance from the radio station, closeness of
other strong radio stations or the pres-
ence of buildings, bridges or other large
obstructions in the area.
4 105
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 106
Features of your vehicle
Using a cellular phone or a two-way
radio
When a cellular phone is used inside the
vehicle, noise may be produced from the
audio equipment. This does not mean
that something is wrong with the audio
equipment. In such a case, use the cellu-
lar phone at a place as far as possible
from the audio equipment.
CAUTION
JBM004
JBM005
When using a communication sys-
tem such a cellular phone or a radio
•
Fading - As your car moves away
•
Station Swapping - As a FM signal
set inside the vehicle, a separate
from the radio station, the signal will
weakens, another more powerful sta-
external antenna must be fitted.
weaken and sound will begin to fade.
tion signal near the same frequency
When a cellular phone or a radio set
When this occurs, we suggest that
may begin to play. This is because
is used with an internal antenna
you select another stronger station.
your radio is designed to lock onto the
alone, it may interfere with the vehi-
•
Flutter/Static
- Weak FM signal or
clearest signal. If this occurs, select
cles electrical system and adverse-
large obstructions between the trans-
another station with a stronger signal.
ly affect safe operation of the vehi-
mitter and your radio can disturb the
•
Multi-Path Cancellation - Radio sig-
cle.
signal causing static or fluttering nois-
nals being received from several
es to occur. Reducing the treble level
directions can cause distortion or flut-
may lessen this effect until the distur-
tering. This can be caused by a direct
bance clears.
or reflected signal from the same sta-
WARNING
tion, or by signals from two stations
Don’t use a cellular phone when
with close frequencies. If this occurs,
you are driving. You must stop at a
select another station until the condi-
safe place to use a cellular phone.
tion has passed.
4 106
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 107
Features of your vehicle
General information
Class 1 laser product
WARNING
RDS (Radio Data System)
Many VHF stations transmit RDS infor-
When driving your vehicle, be sure
to keep the volume of the unit set
mation. The tuner evaluates the RDS
low enough to allow you to hear
telegram and offers the following advan-
tages:
sounds coming from the outsides
(e.g. aware of the road and traffic
PS (Program Service name): Display
conditions).
of station name.
PTY (Program TYpe): Station selec-
CAUTION
tion by program type.
Any inappropriate use of the device
AF
(Alternative
Frequency):
may expose the user to invisible
CAUTION
Automatic re-tuning to best alternative
laser rays which exceed the limits
•
Do not place beverages close to
frequency.
for Class 1 laser products.
the audio system. The audio sys-
TA (Traffic Announcement): Traffic
tem mechanism may be damaged
announcements.
if you spill them.
EON (Enhanced Other Networks):
•
Do not strike or allow anything to
Automatic fade-in of traffic announce-
WARNING
impact the audio system, damage
ments on other stations.
Don’t use a cellular phone when
to the system mechanisms could
you are driving. You must stop at a
occur.
Notes on operating instructions
safe place to use a cellular phone.
The following reading aids are used to
simplify these operating instructions:
Asks you to perform an action
Shows the unit’s reaction
✎ Provides extra info
Identifies a list
4 107
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 108
Features of your vehicle
Safety instructions
Notes on USB stick (thumb drive)
Notes on Bluetooth® Wireless
Technology devices
WARNING
WARNING
Make all inputs via the remote con-
•
We strongly recommend only
WARNING
trol only when the vehicle is sta-
using USB sticks (thumb drives)
In rare cases it is possible that an
tionary, or have the passenger
of well-known manufacturers.
Bluetooth® Wireless Technology
make them. Otherwise, you may
•
On no account must other USB
device is not recognized by the unit
endanger the occupants and other
devices such as hard discs or
or may cause a malfunction. Please
road users.
other digital equipment or multi
only use Bluetooth® Wireless
plug USB hub be connected to
Technology devices that comply with
the USB hub. Connecting other
the Bluetooth® Wireless Technology
devices can cause malfunction or
specifications.
WARNING
even destroy the audio equip-
Avoid inserting any foreign objects
ment.
Notes on Bluetooth® Wireless
into the slot of this player. Failure to
•
Avoid using the USB memory
Technology*
observe this may cause malfunc-
when it might hinder your safety
Bluetooth® Wireless Technology is a
tion due to the precise mechanism
driving.
of this unit.
short-range wireless radio connectivi-
•
It is possible that noise is heard
ty technology used mainly for mobile
during playback when using the
phones, hand-held PC’s and other
AUX-IN together with the power
devices.
WARNING
outlet due to system-related not a
Bluetooth® Wireless Technology SIG
malfunction. If this happens, use
Keep the volume level low enough
Inc. owns the Bluetooth® Wireless
the power source of the AUX
to be aware of road and traffic con-
Technology word, marking and logo;
device.
ditions.
and any use of such marks is under
•
In rare cases it is possible that an
license. Other trademarks and trade
USB stick (thumb drive) is not
names are those of their respective
recognized by the unit or may
owners.
WARNING
cause a malfunction. Please only
Bluetooth® Wireless Technology oper-
Do not open covers and do not
use USB sticks that comply with
ates in 2.4 GHz frequency range and
repair yourself. Refer servicing to
the USB thumb drive specifica-
transmits voice and data at speeds of
qualified personnel.
tions.
up to 1 mbps within a range of up to
10 m.
4 108
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 109
Features of your vehicle
The Head Unit supports the Hands
Care of disc (if equipped)
Depending on the type of CD-R/CD-
free Profile
(HFP), the Advanced
If the temperature inside the car is too
RW CDs, certain CDs may not oper-
Audio Distribution Profile (A2DP) and
high, open the car window for ventila-
ate normally according to manufactur-
the Audio Video Remote Control
tion before using your car audio.
ing companies or making and record-
Profile (AVRCP).
ing methods. In such circumstances,
It is illegal to copy and use MP3/WMA
The Head Unit has been verified and
files without permission. Use CDs that
if you still continue to use those CDs,
certified by the Bluetooth® Wireless
are created only by lawful means.
they may cause the malfunction of
Technology Qualification Program
your car audio system.
Do not apply volatile agents such as
(BQP) for compliance to the Bluetooth®
benzene and thinner, normal cleaners
Wireless Technology standards. For
and magnetic sprays made for ana-
Playing an incompatible Copy
more information, please check the
logue disc onto CDs.
Protected Audio CD
Bluetooth® Wireless Technology web site
To prevent the disc surface from get-
Some copy protected CDs which do not
ting damaged. Hold and carry CDs by
comply with the international audio CD
Connect/Products/) for the BQP product
the edges or the edges of the center
standards (Red Book), may not play on
listing.
hole only.
your car audio. Please note that if you try
to play copy protected CDs and the CD
Clean the disc surface with a piece of
*
Only if this option is available on your
clean soft cloth before playback (wipe
player does not perform correctly the
Head Unit.
it from the center to the outside edge).
CDs may be defective, not the CD player.
Do not damage the disc surface or
Notes on iPod®
attach pieces of sticky tape or paper
on it.
Make sure on undesirable matter
WARNING
other than CDs are inserted into the
The newly introduced iPod® with
CD player.
new firmware may not be 100%
Do not insert more than one CD at a
compatible and may not be sup-
ported by the system.
time. It is likely to block CD operation.
Keep CDs in their cases after use to
protect them from scratches or dirt.
4 109
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 110
Features of your vehicle
Notes on CD formats
Multi Session Disc
Handling CDs
The following CD formats are sup-
A multi session disc is a compact disc to
Avoid leaving fingerprints on the CD
ported by the CD player:
which data is added incrementally in
when removing it.
CD Audio (CD-DA in accordance with
more than one recording, allowing you to
Always store any CDs in their protec-
the Red Book Standard);
add, update, or “delete” files and directo-
tive covers.
ries. You could, theoretically, record audio
CD-R/RW
(in accordance with
Always ensure that CDs are clean
tracks in multiple sessions. However, an
Orange Book, part 2/3)
and dry before inserting.
audio CD player will only play the tracks
Multi-session CD (in accordance with
Protect CDs from heat and direct sun-
in the first session. However, the disc
multi-session CD specification 1.0).
light.
cannot be played in a normal CD-ROM
drive or home or car stereo until the ses-
Red Book
sion is closed.
Red Book is the standard for audio CDs
(Compact Disc Digital Audio system, or
CDDA). It is named after one of a set of
color-bound books that contain the tech-
nical specifications for all CD and
CDROM formats.
Orange Book
Orange Book is the standard for CD-R
Cleaning the unit
duplicating (write-once) media. Compact
Do not clean using cleaning fluid, alcohol
Disc ReWritable (CD-RW) is a rewritable
or other solvents. Use only a damp cloth.
optical disc format. Known as CD-
Erasable (CD-E) during its development,
CD-RW was introduced in 1997, and was
preceded by the never officially released
CD-MO in 1988.
4 110
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 111
Features of your vehicle
Control elements
Head unit with Bluetooth® Wireless Technology capability
1.
Head Unit:
Switching the unit on and off
2.
TA
Tuner:
Activate/deactivate the Traffic
Announcement function
LIST
CD/USB/iPod:
Show tracks/files on device
3.
CD/AUX
CD/USB/iPod/
Short press to toggle between the
AUX:
different audio sources
USB (If available) - AUX (If available)
- BT Audio (If available) or iPod®
(If available) - BT Audio (If available)
Select a FM- or AM-band
4.
FM/AM
Tuner:
Eject CDs from the CD-slot
5.
CD:
Previous or next station
6.
/
Tuner:
Previous or next track/file
CD/USB/iPod/
BT audio:
Select a value for an item
Menu:
Opening for inserting the CD to be
7.
CD-slot
played
Confirm a selection
8.
OK
Select radio station manually
9.
/
Tuner:
Select playback folder.
CD/USB/iPod:
Browse through the Setup/Sound
Menu:
Menu or the list function
Indication, that a CD is inserted into
10. CD-in
the CD player
4 111
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 112
Features of your vehicle
Head unit without Bluetooth® Wireless Technology capability
11.
1 - 6
Tuner: store preset stations, recall
preset stations
RPT
CDDA/CDMP3/
Short press to repeat current track.
USB/iPod:
CDMP3/USB:
Long press to repeat folder
RDM
CDDA:
Short press for random track
CDMP3/USB/
Short press for “Random Folder” or
iPod
“Random Album”
Long press for “Random All”
12.
Head Unit:
Set the volume
13.
Return/Exit menu
14.
Head Unit:
Select sound settings.
15.SETUP
Head Unit:
Open the setup menu
16. INFO
CD/USB:
View File Name -> Song Title* ->
Artist Name -> Album Name* ->
Directory Name -> Total Files
iPod:
View Song Title -> Artist Name ->
Album Name
17. SCAN
Tuner:
Press to scan through the stations in
the current frequency band
CD/USB/iPod:
Short press to select “Scan All” or
long press to select “Scan Folder”
18. AST
Tuner:
Autostore up to 6 stations in
Autostore band
4 112
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 113
Features of your vehicle
Inserting and removing CDs
Automatic switch off
Menu operation
Inserting a CD
If the unit was turned on using the
The central elements for operating the
Insert the CD into the drive (printed
button with the ignition off, it automatical-
menus are the
,
,
,
or OK
side up).
ly switches itself off after 60 minutes.
buttons.
✎ Insert only one disk
✎ For audio/MP3 CDs, playback starts
Volume
automatically.
WARNING
Removing a CD
When setting the volume, please
Press the button and carefully
make sure that traffic noises
remove the CD.
(horns, sirens, emergency vehicles,
etc.) are still audible.
Switching on/off
Press the button to switch the unit
Turn the
knob to set the vol-
on or off.
ume.
Switching on and off with the ignition key
If the unit is switched on, it can be
switched off and on automatically by
removing or inserting and turning the
ignition key.
4 113
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 114
Features of your vehicle
Sound settings
Setting the Treble level
Adjusting the Balance
Enter the Treble sub-menu by means
Enter the Balance sub-menu by
Short press the button to enter the
of the
or
button.
means of the or
button.
Sound Menu.
Short press the or button to set
Short press the or button to
BASS
MIDDLE
TREBLE
the Treble level to the required setting.
adjust the sound volume level
BALANCE
FADER
between the right hand and left hand
speakers)
Short press the button to select
Setting the Fader level
the sound option you want to set.
With this function you can gradually
✎ When pressing the button the
increase or decrease in the sound vol-
Adjusting the Volume
selection order is reversed.
ume level between the front and rear
Adjusts the volume level between its min-
speakers.
imum and maximum settings.
To exit, press SETUP, CD, FM or AM
buttons or short the
button again.
Enter the Fader sub-menu by means
Rotate the Volume knob
clock-
of the
or
button.
wise to increase and counter-clock-
Short press the or button to
wise to decrease the volume level.
Setting the Bass level
adjust the sound volume level
Enter the Bass sub-menu by means
between the rear and front speakers
of the
or
button.
to the desired setting.
Short press the or button to set
the Bass level to the required setting.
Setting the Middle level
Enter the Middle sub-menu by means
of the
or
button.
Short press the or button to set
the Middle level to the required set-
ting.
4 114
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 115
Features of your vehicle
Listening to the Tuner
Selecting an AM band
Automatic search
The tuner offers you to select the one AM
With this function you can search for the
Selecting FM or AM
waveband, the AM. You can select from
next or previous station that fulfils the
The tuner offers you two different wave
two AM bands.
preset reception quality.
bands.
Short press the AM button till the
Press the or button to search
Either press the FM or the AM button.
required AM band is selected.
for the previous/next station in the
✎ The unit switches to band selected.
AM
currently selected waveband.
AMA (AST):
Search will always start for the station
Selecting a FM band
with the strongest signal at LOCAL
In AM you can manually store up to 6
The tuner offers you to select three FM
search level. If no station is found at
AM stations.
bands.
LOCAL level, search will be continued
In the AMA band up to 6 AM stations
Short press the FM button till the
at the DISTANCE level.
will be automatically stored.
required FM band is selected.
To exit, press or button respec-
FM 1
tively.
Autostore
FM 2
This function automatically stores
FMA (AST):
Manual tune
received stations fulfilling the preset
In the FM 1 and FM 2 band you can
With this function you can increase or
reception quality into the FMA or AMA
manually store up to 6 FM stations
decrease the radio frequency manually.
band.
each.
Press the
(Tune Down) or
Short press the AST button to store
In the FMA band up to 6 FM stations
(Tune up) button to decrease or
strongest stations in the AST memory.
will be automatically stored.
increase the frequency.
The maximum number of stations
stored in each AST-band is 6.
Fast tune
✎ Execute “Autostore” to update the list
of the stations (e.g. when leaving an
With this function you can continuously
area).
increase or decrease the radio frequen-
cy.
Either press and hold the or or
the
or
button to increase or
decrease the frequency.
The operation shall continue as long
as the button is pressed.
4
115
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 116
Features of your vehicle
Frequency Scan
Radio Data System (RDS)
TP lost
The tuner will tune to each available sta-
✎ If the TP signal of tuned station is lost
Many FM stations broadcast RDS infor-
tion from the current waveband for 5 sec-
after
30 seconds, an automatic TP
mation. The RDS provides you with infor-
onds before scanning for the next higher
mation of the following:
seek for the next TP station will be
frequency station.
performed. If no TP station is found,
Short press the SCAN button to acti-
the unit will remain at the current sta-
Traffic announcement (TA)
vate/ deactivate the scan function.
tion and display “TP LOST” for 5 sec-
This function enables you to hear traffic
onds.
announcements (TA). You will also hear
Storing preset stations
TP seek will be performed periodical-
traffic announcements when in CD/USB/
ly every 30 seconds until a TP station
In the FM 1 and 2 waveband there are 12
iPOD/ AUX mode.
is found.
station presets and in the AM waveband
Short press the TA button to
there are 6 station presets.
enable/disable function.
(Also see “Selecting FM or AM wave-
Traffic announcements from other sta-
Press the SCAN button to scan for
tions - EON
band”).
Traffic Programme (TP) stations.
Select the waveband, FM or AM.
With the EON function (Enhanced Other
OR
Networks) you will hear traffic announce-
Tune to the desired station.
Press the or to search for TP
ments even if the set station does not
Press and hold one of the preset (1 -
stations.
provide this service but is operating on a
6) button till you hear a beep.
Set the required volume for the traffic
network with other stations.
The station selected is stored under
announcements in the SETUP menu.
✎ If you have activated Traffic info, sta-
the preset button.
The TA symbol will be displayed when
tions with EON will be treated like traf-
TA is enabled.
fic stations, i.e. the search will also
Recalling preset stations
✎ In FM mode: If no TP stations are
stop at these stations.
With this function you can recall a preset
found, the unit will remain at the cur-
✎ When a traffic announcement is
station.
rent station displaying “NO TA/TP” for
made, the unit switches to a traffic
Short press the desired preset button
5 seconds.
information station linked to EON.
(1 through 6) to recall the previously
✎ In CD/USB/IPOD/AUX: If no TP sta-
After the announcement, the unit
set station.
tion is found, the unit will remain at the
returns to the previous programme.
current station. TP seek will be carried
out at the background periodically
every 30 seconds until a TP station is
found or TA will be disabled.
4 116
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 117
Features of your vehicle
Alarm Messages
PTY search (FM only)
This function passes on the PTY-Alarm
This function will be explained in the
message received either from the tuned
SETUP menu.
station itself or from another station in the
EON network of this station.
PI (Programme Identification) seek
This function performs an automatic
PTY ALARM / EON network
seek for the best-received frequency of a
The unit automatically receives emer-
RDS station with a specific PI-code.
gency messages transmitted by the
The unit will display ‘PI SEARCH’.
broadcaster.
The display shows “ALARM”.
To skip the current alarm message,
short press the TA button.
The previous source becomes audi-
ble again.
News ON/OFF
This function will be explained in the
SETUP menu.
Alternative Frequency
This function will be explained in the
SETUP menu.
4 117
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 118
Features of your vehicle
Listening to CD
CD playback
Fast Forward/Reverse
Starting/Stopping a CD
Press and hold the or button to
Notes on CD
If no CD is located in the unit:
for fast forward and reverse.
This CD player is suitable for 12 cm
discs and 8 cm discs with an adaptor
Insert a CD.
✎ During fast forward and fast reverse
audio is audible at reduced volume
only and can read both audio and
The CD will be played from the first
MP3 format CD.
title.
Please do not use irregular shaped
If a CD is located in the unit:
Random Track
CDs.
Press CD button to start playback.
Press the RDM button to activate/
CD-R’s or CD-RW’s can generally be
deactivate “Random Track” feature.
✎ If no CD is loaded into the unit “NO
played. Due to varying quality of sur-
DISC” will appear the display.
face conditions of CDs, as well as the
Repeat Track
Playback will stop when another
performance and condition of the CD
source is selected.
Press the RPT button to activate/
writer, certain CD-R/CD-RW CD may
deactivate the “Repeat Track” feature.
not operate normally on this unit.
Ejecting a CD
Press the button.
Scan Track
Notes on WMA
Remove the disc from the CD slot.
Press SCAN button to activate/deac-
WMA files up to WMA Version 9.0 are
The previous used source will be
tivate the track (title) scan feature.
supported.
selected.
The first 10 seconds of each track/title
will be played.
If the CD is not removed from the slot,
it will be re-tracked into the unit with-
out being played.
Previous/Next Track
Press the or button to select the
previous or next title OR
4 118
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 119
Features of your vehicle
Viewing Information of Audio Files
Notes on WMA files
Text display: ID3 tag V1 and ID3 tag
Short press the INFO button.
The following WMA files are supported:
V2. MP3 tracks can contain addition
Disk Title, Disk Artist, Track Title and
Bit rate: Up to 192 kbit/s
information such as artist, track and
album names (ID3 tags with maxi-
Track Artist can be displayed.
Sampling frequency: Up to 44.1 kHz
mum not more than 12 characters).
✎ If no information is available
“NO
WMA file names must have the
Characters other than upper
INFO” will be displayed, otherwise the
“.wma” extension.
case/lower case letters (“Aa to Zz”)
corresponding information will be dis-
and underscore (“_”) may not be dis-
played for 5 seconds.
Notes on MP3 files
played.
To abort this mode: press one of the
The following MP3 files are supported by
Only files with .mp3 extension are
following buttons
-
/
, Fast
the CD player:
recognized as MP3 files.
/
, RPT, RDM, LIST.
Files conform with MPEG1/2 or 2.5-
The unit may not play the first track in
Layer 3.
the order that you wrote them to the
List Function Audio Files
The format of the CD must be ISO
disc.
✎ With this mode you can browse all
9660 Level 1 or Level 2 or Joliet with
The unit plays only the first session if
supported tracks on the CD.
sector format in Mode 1 or Mode 2
the disc contains both CD audio
The main menu of the LIST function
Form 1. Other formats cannot be
tracks and MP3 files.
consists of:
played reliably.
When playing a disc of 8 kbps or vari-
Short press LIST to enter track brows-
The maximum number of folders is
able bit rate (VBR), the elapsed play-
ing.
99.
ing time in the display window may
Short press or button to
The Maximum number of folders and
not be correct.
browse through the list of the selected
number of files is 490. Additional files
Make sure that a MP3 CD-R/CD-RW
category.
and folders will be ignored.
is burned that is formatted as a data
Short press OK to playback of the
Bit rate: Maximum of 320 kbit/s, con-
disc and NOT as an audio disc.
selected track.
stant or variable.
MP3 files are not compatible with
To abort this mode: press one of the
Sampling frequency: Maximum of 48
packet write data transfer.
following buttons
/
, Fast
kHz.
/
, RPT, RDM, INFO, SOUND,
SETUP and LIST.
4 119
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 120
Features of your vehicle
Playing MP3/WMA files
Repeat
Viewing Information of Compressed
Starting/Stopping playback
Short press the RPT button to select
Audio Files
Press CD button to start playback.
the Repeat file option.
Short press the INFO button.
Playback will stop when another
✎ The current file will be repeated.
File name, Song title*, Album name,
source is selected.
Long press the RPT button to select
Artist name, Directory name and Total
the Repeat Folder option.
track can be displayed.
Previous/Next Track
✎ All files in the current folder will be
✎ If no ID3 Tag is available “NO INFO”
repeated.
will be displayed, otherwise the corre-
Press the or buttons to select
sponding information will be displayed
previous or next track.
for 5 seconds.
Scan
To abort this mode: press one of the
Previous/Next Folder
Short press the SCAN button to
following buttons:
or
, Fast
select the Scan All option.
Press the or button to select
or
, RPT, RDM, INFO, SOUND,
the previous or next folder.
✎ All files in the CD will be scanned.
SETUP and LIST.
Long press the SCAN button to select
the Scan Folder option.
Fast Forward/Reverse
List Function Compressed Audio Files
✎ The first file in each folder will be
Press and hold the or button to
✎ With this mode you can browse fold-
scanned.
for fast reverse and fast forward.
ers and files located on the CD.
CD plays the first 10 seconds of the
✎ During fast forward and fast reverse
The main menu of the LIST function
song.
audio is audible at reduced volume.
consists of:
When a folder ends: scanning contin-
Short press LIST to enter track brows-
ues with the first file of the next folder.
Random
ing.
When a CD ends: scanning continues
Short press the RDM button to select
Short press or button to
with the first file of the first folder.
the Random Folder option.
browse through the list of the selected
✎ All files in the Random Folder will be
category.
played randomly.
Short press OK to playback of the
Long press the RDM button to select
selected track.
the Random All option.
To abort this mode: press one of the
✎ All files on the CD will be played ran-
following buttons:
or
, Fast
domly.
or
, RPT, RDM, INFO, SOUND,
SETUP and LIST.
4 120
YN ENG 4(104~AUDIO).QXP
9/5/2016
4:29 PM Page 121
Features of your vehicle
Using an iPod®
Previous/Next files (File Up/Down)
Random File/Album
Short press to Seek Up or to
Short press the RDM button for
Connecting the iPod®
Seek Down.
Random Album playback.
✎ Use the supplied Kia iPod® interface
cable to connect the iPod® to the car’s
✎ The next/previous file will be played.
✎ The albums of the current selection
will be played in random order (songs
interface connector.
in album remain in order).
Insert the Kia iPod® interface cable
Manual Seek - Fast-forward/
into the connectors of the iPod® and
Fastbackward
Long press the RDM button for
Random File playback.
the car.
Press and hold the or button
When an iPod® is connected and the
(Seek Down / Up).
✎ All music files of the current selection
will be played in random order.
radio is on, the iPod® will be detected
Release the or button when the
automatically. The iPod® will be
desired time has been found.
✎ With “Random File” on, the next file is
selected as Source and the “iPod®”
selected in the iPOD device in a non-
✎ During manual seek audio is audible
icon will be displayed.
sequential, random order.
at reduced volume.
The playing time, title and artist (if
To cancel the “Random File/Album”
available) of the current track will be
mode, short press the RDM button
Repeat File
displayed.
again.
Short press the RPT button.
If no supported file is detected on the
✎ The current file will be repeated once
iPod®, the iPod® source will not be
Viewing Information of iPod® Music files
the current file has ended.
activated.
Short press the INFO button.
To cancel the “Repeat File” mode,
short press the RPT button again.
✎ Song title, artist name and album
Disconnecting the iPod®
name can be displayed.
Remove the Kia iPod® interface cable
✎ File and directory name can not be
from iPod® and car interface connec-
displayed.
tor.
To abort this mode: press one of the
✎ The last used source will be activated.
following buttons - Seek Up / Down,
Fast Forward / Reverse, RPT, RDM,
LIST.
4 121
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст