KIA Ceed (2017 year). Manual — part 14
Features of your vehicle
Operation Tips
Air conditioning (if equipped)
•
To keep dust or unpleasant fumes from
Kia Air Conditioning Systems are filled
CAUTION
entering the vehicle through the venti-
with environmentally friendly refrigerant*.
•
The refrigerant system should
lation system, temporarily set the air
1. Start the engine. Push the air condi-
only be serviced by trained and
intake control to the recirculated air
tioning button.
certified technicians to insure
position. Be sure to return the control
proper and safe operation.
2. Set the mode to the
position.
to the fresh air position when the irrita-
•
The refrigerant system should be
3. Set the air intake control to the outside
tion has passed to keep fresh air in the
serviced in a well-ventilated place.
air or recirculated air position.
vehicle. This will help keep the driver
•
The air conditioning evaporator
4. Adjust the fan speed control and tem-
alert and comfortable.
(cooling coil) shall never be
perature control to maintain maximum
•
Air for the heating/cooling system is
repaired or replaced with one
comfort.
drawn in through the grilles just ahead
removed from a used or salvaged
of the windshield. Care should be
vehicle and new replacement
*: Your vehicle is filled with R-134a or R-
taken that these are not blocked by
MAC evaporators shall be certi-
leaves, snow, ice or other obstructions.
1234yf according to the regulation in
fied (and labeled) as meeting SAE
your country at the time of producing.
•
To prevent interior fog on the wind-
Standard J2842.
You can find out which air conditioning
shield, set the air intake control to the
refrigerant is applied to your vehicle at
fresh air position and fan speed to the
the label inside of hood. Refer to chap-
desired position, turn on the air condi-
ter 8 for more detail location of air con-
tioning system, and adjust the temper-
ditioning refrigerant label.
ature control to desired temperature.
4 146
Features of your vehicle
Air conditioning system operation tips
✽ NOTICE
•
When using the air conditioning sys-
•
If the vehicle has been parked in direct
Outside air
sunlight during hot weather, open the
tem, monitor the temperature gauge
windows for a short time to let the hot
closely while driving up hills or in
Recirculated
heavy traffic when outside tempera-
air inside the vehicle escape.
air
tures are high. Air conditioning sys-
•
Use air conditioning to reduce humidi-
tem operation may cause engine over-
ty and moisture inside the vehicle on
heating. Continue to use the blower
rainy or humid days.
fan but turn the air conditioning sys-
•
During air conditioning system opera-
tem off if the temperature gauge indi-
tion, you may occasionally notice a slight
Blower
cates engine overheating.
change in engine speed as the air con-
Heater core
Climate control
Evaporator
•
When opening the windows in humid
ditioning compressor cycles. This is a
air filter
core
weather air conditioning may create
normal system operation characteristic.
1LDA5047
water droplets inside the vehicle.
•
Use the air conditioning system every
Climate control air filter
Since excessive water droplets may
month only for a few minutes to ensure
The climate control air filter installed
cause damage to electrical equipment,
maximum system performance.
behind the glove box filters the dust or
air conditioning should only be used
•
When using the air conditioning sys-
other pollutants that come into the vehi-
with the windows closed.
tem, you may notice clear water drip-
cle from the outside through the heating
ping (or even puddling) on the ground
and air conditioning system. If dust or
under the passenger side of the vehi-
other pollutants accumulate in the filter
cle. This is a normal system operation
over a period of time, the air flow from the
characteristic.
air vents may decrease, resulting in
•
Operating the air conditioning system
moisture accumulation on the inside of
in the recirculated air position provides
the windshield even when the outside
maximum cooling, however, continual
(fresh) air position is selected. If this hap-
operation in this mode may cause the
pens, we recommend that the climate
air inside the vehicle to become stale.
control air filter be replaced by an author-
•
During cooling operation, you may
ized Kia dealer.
occasionally notice a misty air flow
because of rapid cooling and humid air
intake. This is a normal system opera-
tion characteristic.
4 147
Features of your vehicle
✽ NOTICE
Checking the amount of air con-
•
Replace the filter according to the
ditioner refrigerant and compres-
WARNING - Vehicles
Maintenance Schedule.
sor lubricant
equipped with R-1234yf*
If the car is being driven in severe
When the amount of refrigerant is low,
Because the refrigerant
conditions such as dusty, rough roads,
the performance of the air conditioning is
is mildly inflammable
more frequent climate control air fil-
reduced. Overfilling also has a bad influ-
and at very high pres-
ter inspections and changes are
ence on the air conditioning system.
sure, the air conditioning
required.
system should only be
Therefore, if abnormal operation is found,
•
When the air flow rate suddenly
serviced by trained and
we recommend that the system be inspect-
decreases, we recommend that the
certified technicians. It is
ed by an authorized Kia dealer.
system be checked by an authorized
important that the cor-
Kia dealer.
rect type and amount of
oil and refrigerant is used.
WARNING - Vehicles
Otherwise, it may cause damage to
equipped with R-134a*
the vehicle and personal injury.
Because the refrigerant
is at very high pressure,
the air conditioning sys-
*: Your vehicle is filled with R-134a or R-
tem should only be
1234yf according to the regulation in
serviced by trained and
your country at the time of producing.
certified technicians. It is important
You can find out which air conditioning
that the correct type and amount of
refrigerant is applied your vehicle at
oil and refrigerant is used.
the label inside of hood. Refer to chap-
Otherwise, it may cause damage to
ter 8 for more detail location of air con-
the vehicle and personal injury.
ditioning refrigerant label.
4 148
Features of your vehicle
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)
1. Driver's temperature control knob
8. Passenger's temperature control knob
2. AUTO (automatic control) button
9. Dual temperature control selection button
3. Fan speed control button (Higher speed)
10. OFF button
4. Fan speed control button (Lower speed)
11. Front windshield defroster button
5. Climate control display
12. Mode selection button
6. Air conditioning button
13. Rear window defroster button
7. Air intake control button
OJD042109
4 149
Features of your vehicle
Automatic heating and air condi-
Soft mode
Each time you press the AUTO button,
tioning
the mode will change as follows:
The automatic climate control system is
Soft mode Fast mode
controlled by simply setting the desired
temperature.
The Full Automatic Temperature Control
(FATC) system automatically controls the
heating and cooling system as follows:
1. Press the AUTO button.
The modes, fan speeds, air intake and
air-conditioning will be controlled auto-
OJD042110
matically according to the temperature
Fast mode
setting.
OJD042119
You can choose either the soft mode or
fast mode to select the fan speed.
Soft mode : The wind blows gently.
Fast mode : The wind blows heavier than
the soft mode to reach the selected tem-
perature fast.
4 150
Features of your vehicle
✽ NOTICE
•
To turn the automatic operation off,
select any button of the following:
- Mode selection button
- Front windshield defrost button
(Press the button one more time to
deselect the front windshield
defroster function. The 'AUTO' sign
will illuminate on the information
display once again.)
- Fan speed control button
The selected function will be con-
OJD042230
trolled manually while other functions
OGD041120
2. Turn the temperature control knob to
operate automatically.
✽ NOTICE
set the desired temperature.
•
For your convenience and to improve
Placing any object over the sensor on
the effectiveness of the climate con-
the instrument panel may interfere with
trol, use the AUTO button and set the
the heating and cooling system.
temperature to 22°C/71°F (23°C/73°F
-Except Europe).
4 151
Features of your vehicle
Manual heating and air condition-
ing
The heating and cooling system can be
controlled manually by pressing buttons
or turning knob(s) other than the AUTO
button. In this case, the system works
sequentially according to the order of
buttons or knob(s) selected.
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of heat-
ing and cooling:
- Heating:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to the outside
(fresh) air or recirculated position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn the
air conditioning system on.
Press the AUTO button in order to con-
vert to full automatic control of the sys-
tem.
(if equipped)
OJD042102
Mode selection
The mode selection button controls the direction of the airflow in the vehicle.
If you push the button once, the corresponding switch will turn on, and if you push the
button again, the switch will turn off.
4 152
Features of your vehicle
Floor-Level (A, C, D, E)
Most of the air flow is directed to the
floor.
Defrost-Level (A, D)
Most of the air flow is directed to the
windshield.
OJD042116
OJD042122
Also you may select 2~3 modes at the
Maximum (MAX) defrost mode
Face-Level (B, D, F*)
same time.
When you select the MAX defrost mode,
- face (
) + floor (
) mode
the following system will set automatically:
Air flow is directed toward the upper body
- face (
) + defrost (
) mode
• The air conditioning system will be turn
and face. Additionally, each outlet can be
on.
- floor (
) + defrost (
) mode
controlled to direct the air discharged
• The outside(fresh) air position will be
- face (
) + floor (
) + defrost (
)
from the outlet.
selected.
mode
• The fan speed will set to the high
speed.
* : if equipped
To turn the MAX defrost mode off, press
the mode button or MAX defrost button
again or AUTO button.
4 153
Features of your vehicle
■ Driver’s side
■ Passenger’s side
OJD042107
OJD042113
OJD042112
Temperature control
Adjusting the driver and passenger side
The temperature will increase to the
temperature individually
maximum (HI) by turning the knob to the
1. Press the DUAL button to operate the
right extremely.
driver and passenger side temperature
The temperature will decrease to the
individually. Also, if the passenger side
minimum (Lo) by turning the knob to the
temperature control knob is operated,
left extremely.
it will automatically change to the
DUAL mode as well.
When turning the knob, the temperature
will increase or decrease by 0.5°C/1°F.
2. Operate the driver side temperature
OJD042108
When set to the lowest temperature set-
control to adjust the driver side tem-
Instrument panel vents
perature. Operate the passenger side
ting, the air conditioning will operate con-
The outlet vents can be opened or closed
tinuously.
temperature control to adjust the pas-
separately using the thumbwheel or vent
senger side temperature.
Operate the driver’s side temperature
control lever.
control to adjust the driver side tempera-
Also, you can adjust the direction of air
ture. Operate the passenger’s side tem-
When the driver side temperature is set
delivery from these vents using the vent
perature control to adjust the passenger
to the highest (HIGH) or lowest (LOW)
control lever as shown.
side temperature.
temperature, the DUAL mode deacti-
vates for maximum heating or cooling.
4 154
Features of your vehicle
Adjusting the driver and passenger side
Recirculated air position
temperature equally
With the recirculated air
1. Press the DUAL button again to deac-
position selected, air from
tivate DUAL mode. The passenger
the passenger compart-
side temperature will be set to the
ment will be drawn through
same temperature as the driver side.
the heating system and
2. Operate the driver side temperature
heated or cooled according
control button. The driver and passen-
to the function selected.
ger side temperature will be adjusted
equally.
Outside (fresh) air position
With the outside (fresh) air
Temperature conversion
position
selected, air
OJD042117
You can switch the temperature mode
enters the vehicle from out-
between Centigrade to Fahrenheit as
Air intake control
side and is heated or
follows:
This is used to select the outside (fresh)
cooled according to the
While pressing the DUAL button, press
air position or recirculated air position.
function selected.
the Face-Level selection button
for 3
To change the air intake control position,
seconds or more.
push the control button.
✽ NOTICE
The display will change from Centigrade
Prolonged operation of the heater in the
to Fahrenheit, or from Fahrenheit to
recirculated air position
(without air
Centigrade.
conditioning selected) may cause fog-
ging of the windshield and side windows
✽ NOTICE
and the air within the passenger com-
partment may become stale.
If the battery has been discharged or
In addition, prolonged use of the air con-
disconnected, the temperature mode
ditioning with the recirculated air posi-
display will reset to Centigrade.
tion selected will result in excessively dry
air in the passenger compartment.
4 155
Features of your vehicle
WARNING
•
The continuous use of recirculat-
ed air in the climate control sys-
tem may increase humidity inside
the vehicle, causing the glass to
fog and obscuring visibility.
•
Do not sleep in a vehicle with the
air conditioning or heating system
on. It may cause serious harm or
death due to a drop in the oxygen
level and/or body temperature.
OJD042114
OJD042115
•
The continuous use of recirculat-
ed air in the climate control sys-
Fan speed control
Air conditioning (if equipped)
tem can produce drowsiness or
The fan speed can be set to the desired
Press the A/C button to turn the air con-
sleepiness, which may result in a
speed by pressing the fan speed control
ditioning system on (indicator light will
loss of vehicle control. Set the air
button.
illuminate).
intake control to the outside
To change the fan speed, press the upper
Press the button again to turn the air
(fresh) air position as much as
button (
) for higher speed, or press
conditioning system off.
possible while driving.
the lower button (
) for lower speed.
Pressing the OFF button turns off the
fan.
4 156
Features of your vehicle
System operation
Operation Tips
Ventilation
•
To keep dust or unpleasant fumes from
entering the vehicle through the venti-
1. Set the mode to the
position.
lation system, temporarily set the air
2. Set the air intake control to the outside
intake control to the recirculated air
(fresh) air position.
position. Be sure to return the control
3. Set the temperature control to the
to the fresh air position when the irrita-
desired position.
tion has passed to keep fresh air in the
4. Set the fan speed control to the
vehicle. This will help keep the driver
desired speed.
alert and comfortable.
•
Air for the heating/cooling system is
Heating
drawn in through the grilles just ahead
OJD042118
1. Set the mode to the
position.
of the windshield. Care should be
OFF mode
2. Set the air intake control to the outside
taken that these are not blocked by
leaves, snow, ice or other obstructions.
Press the OFF button to turn off the air
(fresh) air position.
climate control system. However, you can
3. Set the temperature control to the
•
To prevent interior fog on the wind-
shield, set the air intake control to the
still operate the air intake buttons as long
desired position.
fresh air position and fan speed to the
as the ignition switch is in the ON posi-
4. Set the fan speed control to the
desired position, turn on the air condi-
tion.
desired speed.
tioning system, and adjust the temper-
5. If dehumidified heating is desired, turn
ature control to desired temperature.
the air conditioning system on.
• If the windshield fogs up, set the mode
to the
or
position.
4 157
Features of your vehicle
Air conditioning (if equipped)
✽ NOTICE
Kia Air Conditioning Systems are filled
CAUTION
•
When using the air conditioning sys-
with environmentally friendly refrigerant*.
•
The refrigerant system should
tem, monitor the temperature gauge
1. Start the engine. Push the air condi-
only be serviced by trained and
closely while driving up hills or in
tioning button.
certified technicians to insure
heavy traffic when outside tempera-
2. Set the mode to the
position.
proper and safe operation.
tures are high. Air conditioning sys-
•
The refrigerant system should be
tem operation may cause engine over-
3. Set the air intake control to the outside
serviced in a well-ventilated place.
heating. Continue to use the blower
air or recirculated air position.
•
The air conditioning evaporator
fan but turn the air conditioning sys-
4. Adjust the fan speed control and tem-
(cooling coil) shall never be
tem off if the temperature gauge indi-
perature control to maintain maximum
repaired or replaced with one
cates engine overheating.
comfort.
removed from a used or salvaged
•
When opening the windows in humid
vehicle and new replacement
weather air conditioning may create
*: Your vehicle is filled with R-134a or R-
MAC evaporators shall be certi-
water droplets inside the vehicle.
1234yf according to the regulation in
fied (and labeled) as meeting SAE
Since excessive water droplets may
your country at the time of producing.
Standard J2842.
cause damage to electrical equipment,
You can find out which air conditioning
air conditioning should only be used
refrigerant is applied to your vehicle at
with the windows closed.
the label inside of hood. Refer to chap-
ter 8 for more detail location of air con-
ditioning refrigerant label.
4 158
Features of your vehicle
Air conditioning system operation tips
•
When using the air conditioning sys-
•
If the vehicle has been parked in direct
tem, you may notice clear water drip-
Outside air
sunlight during hot weather, open the
ping (or even puddling) on the ground
windows for a short time to let the hot
under the passenger side of the vehi-
Recirculated
air inside the vehicle escape.
cle. This is a normal system operation
air
•
Use air conditioning to reduce humidi-
characteristic.
ty and moisture inside the vehicle on
•
Operating the air conditioning system
rainy or humid days.
in the recirculated air position provides
•
During air conditioning system opera-
maximum cooling, however, continual
operation in this mode may cause the
tion, you may occasionally notice a
Blower
slight change in engine speed as the
air inside the vehicle to become stale.
Heater core
Climate control
Evaporator
air conditioning compressor cycles.
•
During cooling operation, you may
air filter
core
This is a normal system operation
occasionally notice a misty air flow
1LDA5047
characteristic.
because of rapid cooling and humid air
Climate control air filter
•
Use the air conditioning system every
intake. This is a normal system opera-
The climate control air filter installed
month only for a few minutes to ensure
tion characteristic.
behind the glove box filters the dust or
maximum system performance.
other pollutants that come into the vehi-
cle from the outside through the heating
and air conditioning system. If dust or
other pollutants accumulate in the filter
over a period of time, the air flow from the
air vents may decrease, resulting in
moisture accumulation on the inside of
the windshield even when the outside
(fresh) air position is selected. If this hap-
pens, we recommend that the climate
control air filter be replaced by an author-
ized Kia dealer.
4 159
Features of your vehicle
✽ NOTICE
Checking the amount of air con-
•
Replace the filter according to the
ditioner refrigerant and compres-
WARNING - Vehicles
Maintenance Schedule.
sor lubricant
equipped with R-1234yf*
If the car is being driven in severe
When the amount of refrigerant is low,
Because the refrigerant
conditions such as dusty, rough roads,
the performance of the air conditioning is
is mildly inflammable
more frequent climate control air fil-
reduced. Overfilling also has a bad influ-
and at very high pres-
ter inspections and changes are
ence on the air conditioning system.
sure, the air conditioning
required.
system should only be
Therefore, if abnormal operation is
•
When the air flow rate suddenly
serviced by trained and
found, we recommend that the system be
decreases, we recommend that the
certified technicians. It is
inspected by an authorized Kia dealer.
system be checked by an authorized
important that the cor-
Kia dealer.
rect type and amount of
oil and refrigerant is used.
WARNING - Vehicles
Otherwise, it may cause damage to
equipped with R-134a*
the vehicle and personal injury.
Because the refrigerant
is at very high pressure,
the air conditioning sys-
*: Your vehicle is filled with R-134a or R-
tem should only be
1234yf according to the regulation in
serviced by trained and
your country at the time of producing.
certified technicians. It is important
You can find out which air conditioning
that the correct type and amount of
refrigerant is applied your vehicle at
oil and refrigerant is used.
the label inside of hood. Refer to chap-
Otherwise, it may cause damage to
ter 8 for more detail location of air con-
the vehicle and personal injury.
ditioning refrigerant label.
4 160
Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
WARNING - Windshield
heating
Do not use the
position during
cooling operation in extremely
humid weather. The difference
between the temperature of the out-
side air and the windshield could
cause the outer surface of the
windshield to fog up, causing loss
of visibility. In this case, set the
mode selection to the
position
and fan speed control to the lower
OJD042123
OJD042124
speed.
Manual climate control system
To defrost outside windshield
To defog inside windshield
1. Set the fan speed to the highest posi-
•
For maximum defrosting, set the tem-
tion.
1. Set the fan speed to the desired posi-
perature control to the hottest position
tion.
2. Set the temperature to the hottest
and the fan speed control to the high-
position.
2. Select desired temperature.
est speed.
3. Select the
position.
3. Select the
position.
•
If warm air to the floor is desired while
4. The outside (fresh) air and air condi-
4. The outside (fresh) air will be selected
defrosting or defogging, set the mode
tioning will be selected automatically.
automatically. If the
position is
to the floor-defrost position.
selected, air conditioning (if equipped)
•
Before driving, clear all snow and ice
will also be selected automatically.
from the windshield, rear window, out-
If the air conditioning and/or outside
side rear view mirrors, and all side win-
(fresh) air position are not selected auto-
dows.
matically, press the corresponding button
•
Clear all snow and ice from the hood
manually.
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up the
inside of the windshield.
4 161
Features of your vehicle
OJD042125
OJD042126
OGDE041135
Automatic climate control system
To defrost outside windshield
Auto defogging system
1. Set the fan speed to the highest posi-
(Only for automatic climate control
To defog inside windshield
tion.
system, if equipped)
1. Set the fan speed to the desired
2. Set the temperature to the hottest
Auto defogging reduces the possibility of
speed.
(HIGH) position.
fogging up the inside of the windshield by
2. Select desired temperature.
3. Press the
button.
automatically sensing the moisture of
3. Press the
button.
inside the windshield.
4. The air conditioning will turn on
4. The air conditioning will turn on
according to the detected ambient
The auto defogging system operates
according to the detected ambient tem-
temperature and outside
(fresh) air
when the climate control system is on.
perature and outside (fresh) air posi-
position will be selected automatically.
tion will be selected automatically.
✽ NOTICE
If the air conditioning is not selected
automatically, adjust the corresponding
The auto defogging system may not
button manually. If the
position is
operate normally, when the outside tem-
selected, lower fan speed is adjusted to a
perture is below -15 °C.
higher fan speed.
4 162
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст