KIA Ceed (2017 year). Manual — part 2
JD PE eng 3.QXP
03.01.2017
16:38 Page 9
Safety features of your vehicle
Storing positions into memory using
WARNING
the buttons on the door
Never attempt to operate the driver
Storing driver’s seat positions
position memory system while the
1. Shift the shift lever into P or N
(for
vehicle is moving.
Automatic transaxle) or Neutral
(for
This could result in loss of control,
manual transaxle) while the engine
and an accident causing death,
start/stop button is ON or ignition
serious injury, or property damage.
switch ON.
2. Adjust the driver’s seat comfortable for
the driver.
3. Press SET button on the control panel.
The system will beep once.
OJD032054
4. Press one of the memory buttons (1 or
Driver position memory system
2) within 5 seconds after pressing the
(if equipped, for automatic seat)
SET button. The system will beep
A driver position memory system is pro-
twice when memory has been suc-
cessfully stored.
vided to store and recall the driver seat
position with a simple button operation.
By saving the desired position into the
system memory, different drivers can
reposition the driver seat based upon
their driving preference. If the battery is
disconnected, the position memory will
be erased and the driving position should
be restored in the system.
3 9
JD PE eng 3.QXP
03.01.2017
16:38 Page 10
Safety features of your vehicle
Recalling positions from memory
Easy access function (if equipped)
1. Shift the shift lever into P or N
(for
The system will move the driver's seat
Automatic transaxle) or Neutral
(for
automatically as follows:
manual transaxle) while the engine
• Without smart key system
start/stop button is ON or ignition
- It will move the driver’s seat rearward
switch ON.
when the ignition key is removed and
2. To recall the position in the memory,
front driver’s door is opened.
press the desired memory button (1 or
- It will move the driver’s seat forward
2). The system will beep once, then the
when the ignition key is inserted.
driver’s seat will automatically adjust to
• With smart key system
the stored position.
- It will move the driver’s seat rearward
Adjusting the control switch for the dri-
when the engine start/stop button is
ver’s seat while the system is recalling
OPA039052
changed to the OFF position and front
the stored position will cause the move-
Headrest
driver’s door is opened.
ment to stop and move in the direction
The driver's and front passenger's seats
- It will move the driver’s seat forward
that the control switch is moved.
are equipped with a headrest for the
when the engine start/stop button is
occupant's safety and comfort.
changed to the ACC or START posi-
tion.
The headrest not only provides comfort
WARNING
for the driver and front passenger, but
Use caution when recalling the
also helps protect the head and neck in
adjustment memory while sitting in
You can activate or deactivate this feature.
the event of a collision.
the vehicle. Push the seat position
Refer to "User settings" in section 4.
control switch to the desired posi-
tion immediately if the seat moves
too far in any direction.
3 10
JD PE eng 3.QXP
03.01.2017
16:38 Page 11
Safety features of your vehicle
WARNING
•
For maximum effectiveness in
case of an accident, the headrest
should be adjusted so the middle
of the headrest is at the same
height of the center of gravity of
an occupant's head. Generally,
the center of gravity of most peo-
ple's head is similar with the
height of the top of their eyes.
Also, adjust the headrest as close
to your head as possible. For this
OJD032009
OJD032010
reason, the use of a cushion that
Forward and rearward adjustment
Adjusting the height up and down
holds the body away from the
(if equipped)
To raise the headrest, pull it up to the
seatback is not recommended.
The headrest may be adjusted forward to
desired position (1). To lower the head-
•
Do not operate the vehicle with
4 different positions by pulling the head-
rest, push and hold the release button (2)
the headrests removed as severe
rest forward to the desired detent. To
on the headrest support and lower the
injury to the occupants may
adjust the headrest to it’s furthest rear-
headrest to the desired position (3).
occur in the event of an accident.
wards position, pull it fully forward to the
Headrests may provide protec-
farthest position and release it. Adjust the
tion against neck injuries when
headrest so that it properly supports the
properly adjusted.
head and neck.
•
Do not adjust the headrest posi-
tion of the driver's seat while the
vehicle is in motion.
3 11
JD PE eng 3.QXP
03.01.2017
16:38 Page 12
Safety features of your vehicle
■ Type A
■ Type A
OJD033068
OJD033069
■ Type B
■ Type B
OYFH034205
CAUTION
If you recline the seatback towards
the front with the head restraint and
seat cushion raised, the head
restraint may come in contact with
OJD033070
OJD033071
the sunvisor or other parts of the
vehicle.
Removal and installation
To reinstall the headrest :
To remove the headrest:
1. Put the headrest poles (2) into the holes
while pressing the release button (1).
1. Recline the seatback
(2) with the
recline lever or switch (1).
2. Recline the seatback
(4) with the
recline lever or switch (3).
2. Raise headrest as far as it can go.
3. Adjust the headrest to the appropriate
3. Press the headrest release button (3)
height.
while pulling the headrest up (4).
WARNING
WARNING
Always make sure the headrest
NEVER allow anyone to ride in a seat
locks into position after reinstalling
with the headrest removed.
and adjusting it properly.
3
12
JD PE eng 3.QXP
03.01.2017
16:39 Page 13
Safety features of your vehicle
✽ NOTICE
With the seat warmer switch in ON
WARNING - Seat warmer
position, the heating system in the seat
burns
turns off or on automatically depending
Passengers should use extreme
on the seat temperature.
caution when using seat warmers
due to the possibility of excess
heating or burns. The occupants
CAUTION - Seat damage
must be able to feel if the seat is
•
When cleaning the seats, do not
becoming too warm and to turn the
use an organic solvent such as
seat warmer off. The seat warmer
paint thinner, benzene, alcohol and
may cause burns even at low tem-
gasoline. Doing so may damage
peratures, especially if used for
OJD032012
the surface of the heater or seats.
long periods of time.
•
To prevent overheating the seat
Seat warmer (if equipped)
In particular, the driver must exer-
warmer, do not place anything on
The seat warmer is provided to warm the
cise extreme care for the following
the seats that insulates against
front seats during cold weather. With the
types of passengers:
heat, such as blankets, cushions
ignition switch in the ON position, push
1. Infants, children, elderly or dis-
or seat covers on the seats while
either of the switches to warm the driver's
abled persons, or hospital outpa-
the seat warmer is in operation.
seat or the front passenger's seat.
tients
•
Do not place heavy or sharp
During mild weather or under conditions
2. Persons with sensitive skin or
objects on seats equipped with
where the operation of the seat warmer
those that burn easily
seat warmers. Damage to the seat
is not needed, keep the switches in the
3. Fatigued individuals
warming components could occur.
"OFF" position.
4. Intoxicated individuals
•
Do not change the seat cover. It
• Each time you press the switch, the
may damage the seat warmer.
5. Individuals taking medication
temperature setting of the seat will
that can cause drowsiness or
change as follows :
sleepiness
(sleeping pills, cold
OFF HIGH (
) MID (
)
tablets, etc.)
LOW (
)
• The seat warmer defaults to the OFF
position whenever the ignition switch is
turned on.
3
13
JD PE eng 3.QXP
03.01.2017
16:39 Page 14
Safety features of your vehicle
Rear Seat Entry
Driver’s seat
(For 3-door vehicle only)
To get in or get out of the rear seat, the
driver’s or front passenger’s seat should
be folded and the seat should be slide.
OJD033064E
Front passenger’s seat
OJD032013
Seatback pocket (if equipped)
The seatback pocket is provided on the
back of the front passenger’s and driver’s
seatbacks.
WARNING - Seatback
pockets
Do not put heavy or sharp objects
in the seatback pockets. In an acci-
OJD033065
dent they could come loose from
1. Fold the front seatback by pulling up
the pocket and injure vehicle occu-
the walk-in seat lever and then slide
pants.
the front seat forward.
3 14
JD PE eng 3.QXP
03.01.2017
16:39 Page 15
Safety features of your vehicle
WARNING
•
For maximum effectiveness in
case of an accident, the headrest
should be adjusted so the middle
of the headrest is at the same
*
height of the center of gravity of
an occupant's head. Generally,
the center of gravity of most peo-
ple's head is similar with the
height of the top of their eyes.
Also adjust the headrest as close
* if equipped
OJK032061
OPA039053
to your head as possible. For this
reason, the use of a cushion that
2. Set the belt extension guide to position
Rear seat
holds the body away from the
(3).
Headrest
seatback is not recommended.
3. After getting in or getting out, slide the
The rear seat is equipped with headrests
•
Do not operate the vehicle with
seat rearward while holding the seat
in all the seating positions for the occu-
the headrests removed. Severe
cushion and then push the seatback
pant's safety and comfort.
rearward. And set the belt extension
injury to an occupant may occur
The headrest not only provides comfort
guide to position (1) or (2).
in the event of an accident.
for passengers, but also helps protect the
Headrests may provide protec-
head and neck in the event of a collision.
tion against severe neck injuries
when properly adjusted.
3 15
JD PE eng 3.QXP
03.01.2017
16:39 Page 16
Safety features of your vehicle
OJD032014
OJD032015
OJD032016
Adjusting the height up and down
Removal and installation
Armrest (if equipped)
To raise the headrest, pull it up to the
To remove the headrest, raise it as far as
To use the armrest, pull it forward from
desired position (1). To lower the head-
it can go then press the release button
the seatback.
rest, push and hold the release button (2)
(1) while pulling the headrest up (2).
on the headrest support and lower the
To reinstall the headrest, put the head-
headrest to the desired position (3).
rest poles (3) into the holes while press-
ing the release button (1). Then adjust it
to the appropriate height.
WARNING
Make sure the headrest locks in
position after adjusting it to proper-
ly protect the occupants.
3 16
JD PE eng 3.QXP
03.01.2017
16:39 Page 17
Safety features of your vehicle
Folding the rear seat
The rear seatbacks (or cushions) may be
folded to facilitate carrying long items or
to increase the luggage capacity of the
vehicle.
WARNING
The purpose of the fold-down rear
seatbacks (or cushions) is to allow
you to carry longer objects than
could otherwise be accommodated.
OJD032018
Never allow passengers to sit on
OJD032017
top of the folded down seatback
To fold the rear seat cushion and back
while the car is moving as this is
(5 Door and Wagon)
not a proper seating position and
1. Set the front seatback to the upright
no seat belts are available for use.
position and if necessary, slide the
This could result in serious injury
front seat forward.
or death in case of an accident or
2. Lift the front portion of the seat cush-
sudden stop. Objects carried on the
ion up.
folded down seatback should not
extend higher than the top of the
front seats. This could allow cargo
OJD032019
to slide forward and cause injury or
3. Lift the rear portion of the seat cush-
damage during sudden stops.
ion. Stand the rear seat cushion verti-
cally.
4. Pull the lock release lever (red visible).
3 17
JD PE eng 3.QXP
03.01.2017
16:39 Page 18
Safety features of your vehicle
OJD032020
OJD032021
OJD032022
5. Remove the headrest from the rear
7. Fold the rear seatback forward and
8. To use the rear seat, reposition the
seatback.
down firmly.
headrest on the seatback and adjust it
6. Stow the headrest by inserting the
to the desired position.
headrest poles into the holder on the
9. Lift and push the seatback backward
bottom of the seat cushion.
firmly until it clicks into place. Make
sure the seatback is locked in place
(red invisible).
3 18
JD PE eng 3.QXP
03.01.2017
16:40 Page 19
Safety features of your vehicle
OJD032023
OJD035076L
OJD033067
10. Return the seat cushion to the origi-
To fold down the rear seatback
3. Pull the lock release lever (1) and fold
nal position by pushing down the rear
(for 3 Door):
the rear seatback forward and down
side of the seat cushion first. Make
1. Set the front seatback to the upright
firmly.
sure the seat cushion is locked in
position and if necessary, slide the
If the seat belt locks after unfolding the
place.
front seat forward.
rear seatback, pull out the locked seat
11. Return the rear seat belt to the prop-
2. Lower the rear headrests to the lowest
belt, release it then pull it out again.
er position.
position.
3 19
JD PE eng 3.QXP
03.01.2017
16:40 Page 20
Safety features of your vehicle
To unfold the rear seat
1. To use the rear seat, lift and pull the
WARNING
WARNING - Cargo
seatback backward. Pull the seatback
When you return the rear seatback
Cargo should always be secured to
firmly until it clicks into place. Make
to its upright position after being
prevent it from being thrown about
sure the seatback is locked in place.
folded down:
the vehicle in a collision and caus-
When you return the seatback to its
Be careful not to damage the seat
ing injury to the vehicle occupants.
upright position, always be sure it has
belt webbing or buckle. Do not
Special care should be taken of
locked into position by pushing on the
allow the seat belt webbing or
objects placed in the rear seats,
top of the seatback.
since those may hit the front seat
buckle to get caught or pinched in
If you can not see the red line at the
the rear seat. Ensure that the seat-
occupants in a frontal collision.
bottom of folding lever, it means the
back is completely locked into its
seatback is locked completely.
upright position by pushing on the
2. Return the rear seat belt to the proper
top of the seatback. Otherwise, in
WARNING - Cargo loading
position.
an accident or sudden stop, the
Make sure the engine is off, the
3. When the seatback is completely
seat could fold down and allow
automatic transaxle is in P (Park)
installed, check the seatback folding
cargo to enter the passenger com-
or the manual transaxle is in R
lever again.
partment, which could result in
(Reverse) or 1st, and the parking
serious injury or death.
brake is securely applied whenever
loading or unloading cargo. Failure
to take these steps may allow the
CAUTION - Rear seat belts
vehicle to move if the shift lever is
When returning the rear seatbacks
inadvertently moved to another
to the upright position, remember
position.
to return the rear shoulder belts to
their proper position.
3 20
JD PE eng 3.QXP
03.01.2017
16:40 Page 21
Safety features of your vehicle
SEAT BELTS
Seat belt restraint system
(Continued)
(Continued)
• Avoid wearing twisted seat belts.
Care should be taken to avoid con-
WARNING
A twisted belt can't do its job as
tamination of the webbing with pol-
•
For maximum restraint system
well. In a collision, it could even
ishes, oils and chemicals, and par-
protection, the seat belts must
cut into you. Be sure the belt web-
ticularly battery acid.
always be used whenever the car
bing is straight and not twisted.
Cleaning may safely be carried out
is moving.
• Be careful not to damage the belt
using mild soap and water. The belt
•
Seat belts are most effective
webbing or hardware. If the belt
should be replaced if webbing
when seatbacks are in the
webbing or hardware is dam-
becomes frayed, contaminated or
upright position.
aged, replace it.
damaged. It is essential to replace
•
Children age 12 and younger must
the entire assembly after it has
always be properly restrained in
been worn in a severe impact even
the rear seat. Never allow children
if damage to the assembly is not
WARNING
obvious. Belts should not be worn
to ride in the front passenger seat.
If a child over 12 must be seated in
Seat belts are designed to bear
with straps twisted. Each belt
the front seat, he/she must be
upon the bony structure of the
assembly must only be used by one
properly belted and the seat
body, and should be worn low
occupant; it is dangerous to put a
should be moved as far back as
across the front of the pelvis or the
belt around a child being carried on
possible.
pelvis, chest and shoulders, as
the occupant's lap.
applicable; wearing the lap section
•
Never wear the shoulder belt
of the belt across the abdominal
under your arm or behind your
back. An improperly positioned
area must be avoided.
shoulder belt can cause serious
Seat belts should be adjusted as
injuries in a crash. The shoulder
firmly as possible, consistent with
belt should be positioned midway
comfort, to provide the protection
over your shoulder across your
for which they have been designed.
collarbone.
A slack belt will greatly reduce the
(Continued)
protection afforded to the wearer.
(Continued)
3 21
JD PE eng 3.QXP
03.01.2017
16:40 Page 22
Safety features of your vehicle
If you continue not to fasten the seat belt
WARNING
and you drive over 9km/h, the illuminated
warning light will start to blink until you
•
No modifications or additions
should be made by the user
drive under 6km/h. (if equipped)
which will either prevent the seat
If you continue not to fasten the seat belt
belt adjusting devices from oper-
and you drive over 20km/h the seat belt
ating to remove slack, or prevent
warning chime will sound for approxi-
the seat belt assembly from being
mately 100 seconds and the correspon-
adjusted to remove slack.
ding warning light will blink. (if equipped)
•
When you fasten the seat belt, be
careful not to latch the seat belt in
buckles of other seat. It's very dan-
gerous and you may not be pro-
OAM032161L
tected by the seat belt properly.
Seat belt warning
•
Do not unfasten the seat belt and
Driver’s seat belt warning (1)
do not fasten and unfasten the
As a reminder to the driver, the seat belt
seat belt repeatedly while driving.
warning light will illuminate for approxi-
This could result in loss of con-
mately 6 seconds each time you turn the
trol, and an accident causing
ignition switch ON regardless of belt fas-
death, serious injury, or property
tening.
damage.
If the driver’s seat belt is unfastened after
•
When fastening the seat belt,
the ignition switch is ON, the seat belt
make sure that the seat belt does
warning light illuminates until the belt is
not pass over objects that are
fastened.
hard or can break easily.
•
Make sure there is nothing in the
buckle. The seat belt may not be
fastened securely.
3 22
JD PE eng 3.QXP
03.01.2017
16:40 Page 23
Safety features of your vehicle
If you continue not to fasten the seat belt
■ Type A
and you drive over 20km/h the seat belt
warning chime will sound for approxi-
mately 100 seconds and the correspon-
ding warning light will blink.
WARNING
Riding in an improper position
adversely affects the front passen-
ger’s seat belt warning system. It is
OJD032025
important for the driver to instruct
■ Type B
OJD032024
the passenger as to the proper
seating instructions as contained
Front passenger’s seat belt warning (2)
in this manual.
As a reminder to the front passenger, the
front passenger’s seat belt warning lights
will illuminate for approximately 6 sec-
onds each time you turn the ignition
✽ NOTICE
switch ON regardless of belt fastening.
• You can find the front passenger’s
If the front passenger’s seat belt is not
seat belt warning light on the center
fascia panel.
fastened when the ignition switch is
• Although the front passenger seat is
turned ON or if it is disconnected after
not occupied, the seat belt warning
OJD032058
the ignition switch is turned ON, the cor-
light will blink or illuminate for 6 sec-
Rear passenger’s seat belt warning (3,4,5)
responding seat belt warning light will
illuminate until the belt is fastened.
onds.
If the ignition switch is turned ON(engine
• The front passenger's seat belt warn-
If you continue not to fasten the seat belt
is not running) when the rear passen-
ing may operate when luggage is
and you drive over 9km/h, the illuminated
ger's lap/shoulder belt is not fastened,
placed on the front passenger seat.
warning light will start to blink until you
the corresponding seat belt warning light
drive under 6km/h.
will illuminate until the belt is fastened.
3 23
JD PE eng 3.QXP
03.01.2017
16:40 Page 24
Safety features of your vehicle
And then, the rear corresponding seat
■ Front seat
To raise the height adjuster, pull it up (1).
belt warning light will illuminate for
To lower it, push it down (3) while press-
approximately 35 seconds, if any of fol-
ing the height adjuster button (2).
lowing occurs;
Release the button to lock the anchor
- You start the engine when the rear belt
into position. Try sliding the height
is not fastened.
adjuster to make sure that it has locked
- You drive over 9km/h when the rear belt
into position.
is not fastened.
- The rear belt is disconnected when
driving under 20km/h.
If the rear seat belt is fastened, the warn-
OLM039026
ing light will turn off immediately.
Lap/shoulder belt
If the rear seat belt is disconnected when
you drive over the 20km/h, the corre-
Height adjustment (5 Door and Wagon)
sponding seat belt warning light will blink
You can adjust the height of the shoulder
and warning chime will sound for 35 sec-
belt anchor to one of 4 positions for max-
onds.
imum comfort and safety.
But, if the rear passenger's lap/shoulder
The height of the adjusting seat belt
belt is/are connected and disconnected
should not be too close to your neck. You
twice within 9 seconds after the belt is
will not be getting the most effective pro-
fastened, the corresponding seat belt
tection. The shoulder portion should be
warning light will not operate.
adjusted so that it lies across your chest
and midway over your shoulder near the
door and not your neck.
To adjust the height of the seat belt
anchor, lower or raise the height adjuster
into an appropriate position.
3 24
JD PE eng 3.QXP
03.01.2017
16:40 Page 25
Safety features of your vehicle
WARNING
•
Verify the shoulder belt anchor is
locked into position at the appro-
priate height. Never position the
shoulder belt across your neck or
face. Improperly positioned seat
belts can cause serious injuries
1
in an accident.
•
Failure to replace seat belts after
2
an accident could leave you with
B180A01NF
damaged seat belts that will not
■ Rear center seat belt (if equipped)
OJK032061
provide protection in the event of
Shoulder belt extension guide
another collision leading to per-
(For 3-door vehicle only)
sonal injury or death. Replace
your seat belts after being in an
You can adjust the position of the shoul-
accident as soon as possible.
der belt extension guide for easier
access to the shoulder belt.
• Set the belt extension guide to the posi-
tion (1~2) when using the seat belt.
• Set the belt extension guide to the
position (3) when getting in or getting
out of the rear seat.
OJD032026
To fasten your seat belt:
To fasten your seat belt, pull it out of the
retractor and insert the metal tab (1) into
the buckle (2). There will be an audible
"click" when the tab locks into the buckle.
3 25
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст