KIA Ceed (2017 year). Manual — part 8
Features of your vehicle
MIRRORS
Inside rearview mirror
Electric chromic mirror (ECM)
(if equipped)
Adjust the rearview mirror so that the
center view through the rear window is
The electric rearview mirror automatical-
seen. Make this adjustment before you
ly controls the glare from the headlights
start driving.
Night
of the car behind you in nighttime or low
light driving conditions. The sensor
mounted in the mirror senses the light
WARNING - Rear visibility
level around the vehicle, and automati-
Do not place objects in the rear
cally controls the headlight glare from
seat or cargo area which would
vehicles behind you.
interfere with your vision out the
When the engine is running, the glare is
rear window.
Day
automatically controlled by the sensor
OMD040031
mounted in the rearview mirror.
Day/night rearview mirror
Whenever the shift lever is shifted into R
WARNING
(if equipped)
(Reverse), the mirror will automatically go
Do not adjust the rearview mirror
Make this adjustment before you start
to the brightest setting in order to improve
while the vehicle is moving. This
driving and while the day/night lever is in
the drivers view behind the vehicle.
could result in loss of control, and
the day position.
an accident which could cause
Pull the day/night lever toward you to
CAUTION
death, serious injury or property
reduce glare from the headlights of vehi-
When cleaning the mirror, use a
damage.
cles behind you during night driving.
paper towel or similar material
Remember that you lose some rearview
dampened with glass cleaner. Do not
clarity in the night position.
spray glass cleaner directly on the
WARNING
mirror as that may cause the liquid
Do not modify the inside mirror and
cleaner to enter the mirror housing.
do not install a wide mirror. It could
result in injury, during an accident
or deployment of the air bag.
4 44
Features of your vehicle
Outside rearview mirror
CAUTION
Be sure to adjust mirror angles before
Do not scrape ice off the mirror face;
driving.
this may damage the surface of the
Your vehicle is equipped with both left-
glass. If ice should restrict move-
hand and right-hand outside rearview
ment of the mirror, do not force the
mirrors. The mirrors can be adjusted
mirror for adjustment. To remove ice,
remotely with the remote switch. The mir-
use a deicer spray, or a sponge or
ror heads can be folded back to prevent
soft cloth with very warm water.
damage during an automatic car wash or
Indicator
when passing in a narrow street.
CAUTION
OMD040032
WARNING - Rearview
If the mirror is jammed with ice, do
mirrors
To operate the electric rearview mirror:
not adjust the mirror by force. Use
•
The outside rearview mirror is
an approved spray de-icer (not radi-
• Press the on/off button (1) to turn the
convex. Objects seen in the mir-
ator antifreeze) to release the
automatic dimming function on. The
ror are closer than they appear.
frozen mechanism or move the
mirror indicator light will illuminate.
•
Use your interior rearview mirror
vehicle to a warm place and allow
Press the on/off button to turn the auto-
or direct observation to determine
the ice to melt.
matic dimming function off. The mirror
the actual distance of following
indicator light will turn off.
vehicles when changing lanes.
• The mirror defaults to the ON position
whenever the ignition switch is turned
WARNING
on.
Do not adjust or fold the outside
rearview mirrors while the vehicle
is moving. This could result in loss
of control, and an accident which
could cause death, serious injury
or property damage.
4 45
Features of your vehicle
CAUTION
•
The mirrors stop moving when
they reach the maximum adjust-
ing angles, but the motor contin-
ues to operate while the switch is
pressed. Do not press the switch
longer than necessary, the motor
may be damaged.
•
Do not attempt to adjust the out-
side rearview mirror by hand.
Doing so may damage the parts.
OJD042033
OJD042034
Remote control
Folding the outside rearview mirror
The electric remote control mirror switch
Manual type
allows you to adjust the position of the
To fold outside rearview mirror, grasp the
left and right outside rearview mirrors. To
housing of mirror and then fold it toward
adjust the position of either mirror, move
the rear of the vehicle.
the lever (1) to R (Right) or L (Left) to
select the right side mirror or the left side
mirror, then press a corresponding point
on the mirror adjustment control to posi-
tion the selected mirror up, down, left or
right.
After adjustment, put the lever into neu-
tral (center) position to prevent inadver-
tent adjustment.
4 46
Features of your vehicle
The mirror will fold or unfold automatical-
ly as follows:
CAUTION
•
Without smart key system
The electric type outside rearview
- The mirror will fold or unfold when the
mirror operates even though the
door is locked or unlocked by the
ignition switch is in the OFF posi-
transmitter.
tion. However, to prevent unneces-
sary battery discharge, do not adjust
•
With smart key system
the mirrors longer than necessary
- The mirror will fold or unfold when the
while the engine is not running.
door is locked or unlocked by the
smart key.
- The mirror will fold or unfold when the
CAUTION
door is locked or unlocked by the but-
OJD042035
ton on the outside door handle.
In case it is an electric type outside
Electric type
rearview mirror, don’t fold it by
- The mirror will unfold when you
The outside rearview mirror can be fold-
approach the vehicle (all doors closed
hand. It could cause motor failure.
ed or unfolded by pressing the switch as
and locked) with a smart key in pos-
below.
session.
Up (1) : The mirror will unfold.
Down (2) : The mirror will fold.
Center (AUTO, 3) :
4 47
Features of your vehicle
INSTRUMENT CLUSTER (NORMAL VISION)
1. Tachometer
2. Speedometer
3. Fuel gauge
4. Warning and indicator lights (if equipped)
5. Turn signal indicators
6. LCD display
❈ The actual cluster in the vehicle may differ
from the illustration.
For more details, refer to "Gauges" in the
following pages.
OJD042036
4 48
Features of your vehicle
■ Gasoline Engine
■ Diesel Engine
OJD042047
OJD042040
OJD042044/OJD042045
Instrument panel illumination
Gauges
Tachometer
The tachometer indicates the engine
The instrument panel illumination intensity
Speedometer
can be adjusted as follows:
speed in revolutions per minute (rpm).
The speedometer indicates the vehicle
• Ignition switch in the ON position
speed.
Use the tachometer to select the correct
• Pressing the upper or lower part of the
shift points and to prevent lugging and/or
The speedometer is calibrated in kilome-
switch
over-revving the engine.
ters per hour and/or miles per hour.
The illumination intensity is shown on the
CAUTION
instrument cluster LCD display.
Do not operate the engine within
the tachometer's RED ZONE. This
may cause severe engine damage.
4 49
Features of your vehicle
WARNING - Fuel gauge
Running out of fuel can expose
vehicle occupants to danger.
You must stop and obtain addition-
al fuel as soon as possible after the
warning light comes on or when the
gauge indicator comes close to the
“O (Empty)” level.
OJD042046
CAUTION
OJD042058
Avoid driving with an extremely low
Fuel gauge
Engine coolant temperature gauge
fuel level. Running out of fuel could
The fuel gauge indicates the approxi-
This gauge shows the temperature of the
cause the engine to misfire damag-
mate amount of fuel remaining in the fuel
engine coolant when the ignition switch
ing the catalytic converter.
tank.
is ON.
Do not continue driving with an overheat-
✽ NOTICE
ed engine. If your vehicle overheats, refer
to “If the engine overheats” in chapter 6.
• The fuel tank capacity is given in
chapter 8.
• The fuel gauge is supplemented by a
low fuel warning light, which will illu-
minate when the fuel tank is nearly
empty.
• On inclines or curves, the fuel gauge
may fluctuate or the low fuel warning
light may come on earlier than usual
due to the movement of fuel in the tank.
4 50
Features of your vehicle
CAUTION
If the gauge pointer moves beyond
the normal range area toward the
“130°C”, it indicates overheating
that may damage the engine.
WARNING
Never remove the radiator cap
when the engine is hot. The engine
coolant is under pressure and
OJD042231/OJD042232
OJD042233
could cause severe burns. Wait
Manual transaxle shift indicator
Automatic transaxle shift position
until the engine is cool before
(if equipped)
indicator (if equipped)
adding coolant to the reservoir.
This indicator informs you which gear is
The indicator displays which automatic
desired while driving to save fuel.
transaxle shift lever is selected.
For example
: Indicates that shifting up to the 3rd
gear is desired (currently the shift
lever is in the 2nd or 1st gear).
: Indicates that shifting down to the
3rd gear is desired (currently the
shift lever is in the 4th or 5th gear).
You can turn off the indicator. Refer to
“User setting” in this chapter.
4 51
Features of your vehicle
■ Type A
■ Type B
CAUTION - DCT
•
When the problem of gear system
occurs, the transaxle indicator
will blink. For your safety, we rec-
ommend that you contact an
authorized Kia dealer and have
the system checked.
•
When the clutch is overheated,
the safe protection mode oper-
ates. According to the safe protec-
tion mode, the transaxle indicator
OJD042231/OJD042232
OJD042234
blinks with buzzer sound. The
buzzer beeps 3 times. In this time,
Automatic Transaxle Shift Indicator in
Dual clutch transmission
the LCD warning about safe pro-
sports mode (if equipped, For Europe)
(DS mode) shift indicator
tection mode also displays. In this
In the Sports Mode, this indicator informs
(if equipped)
condition, the driving may not be
which gear is desired while driving to
The indicator displays which Dual clutch
smoothly. If you ignore this warn-
save fuel.
transmission shift lever is selected.
ing, the driving condition is get-
In DS mode, the “SPORTS” indicator dis-
ting worse and the system may
For example
plays in cluster. For more detailed infor-
have problem. To return the nor-
: Indicates that shifting up to the 3rd
mation about DS mode, refer to the chap-
mal driving condition, apply the
gear is desired (currently the shift
ter 5.
foot brake and stop the vehicle for
lever is in the 2nd or 1st gear).
few minutes before driving off.
: Indicates that shifting down to the 3rd
gear is desired (currently the shift
* DCT : Dual clutch transmission
lever is in the 4th, 5th, or 6th gear).
When the system is not working properly,
the indicator is not displayed.
4 52
Features of your vehicle
OJD052031
OJD042051
OJD042050
Speed limiter indicator
Odometer (km or mi.)
Trip computer
(if equipped)
The odometer indicates the total dis-
The trip computer is a microcomputer-
The indicator illuminates when the speed
tance the vehicle has been driven.
controlled driver information system that
limit control system is enabled by move
You will also find the odometer useful to
displays information related to driving
the
lever up on the steering wheel.
determine when periodic maintenance
when the ignition switch is in the ON
The indicator goes off when the
lever
should be performed.
position. All stored driving information
up again to deactivate the system.
(except odometer, distance to empty and
instant fuel economy) resets if the battery
If there is a problem with the speed limit
is disconnected.
control system, the “---” indicator will blink.
If this occurs, we recommend that the
system be checked by an authorized Kia
dealer.
For more details, refer to “Speed limit
control system” in chapter 5.
The speed limiter indicators illuminates
on the LCD display.
4 53
Features of your vehicle
Press the ▲ or ▼ button for less than 1
second to select any mode as follows:
Tripmeter A
Tripmeter B
Distance to empty*
Average fuel consumption*
OJD042052
OJD042053
Tripmeter (km or mi.)
Distance to empty (km or mi.)
Instant fuel consumption*
This mode indicates the distance of indi-
This mode indicates the estimated dis-
vidual trips selected since the last trip-
tance the vehicle can be driven with the
Average speed*
meter reset.
remaining fuel. When the remaining dis-
The meter's working range is from 0.0 to
tance is below 50 km (30 miles), “---” will
9999.9 km (0.0 to 9999.9 miles).
be displayed.
Elapsed time*
Pressing the
button for more than 1
The meter’s working range is from 50 to
second, clears the tripmeter to zero (0.0).
999 km (30 to 999 miles).
Engine coolant temperature gauge
Service*
User setting*
* : if equipped
4 54
Features of your vehicle
• When the “AVG Fuel Economy” of
“User Setting” is in the “Auto Reset”
If the vehicle speed exceeds 1 km/h after
refueling more than 6 l, the average fuel
consumption will be cleared to zero (---).
• When the “AVG Fuel Economy” of
“User Setting” is in the “Manual Reset”
Pressing the
button for more than 1
second, when the average fuel consump-
tion is displayed, clears the average fuel
consumption to zero (--.-).
OJD042054
OJD042055
Average fuel economy (if equipped)
Instant fuel economy (if equipped)
(L/100 km or MPG)
(L/100 km or MPG)
This mode calculates the average fuel
This mode calculates the instant fuel con-
consumption from the total fuel used and
sumption during the last few seconds.
the distance since the last average fuel
economy reset. The total fuel used is cal-
culated from the fuel consumption input.
For an accurate calculation, drive more
than 50 m (0.03 miles).
To clear the average fuel economy to
zero (--.-), do as follow;
4 55
Features of your vehicle
✽ NOTICE
•
If the vehicle is not on level ground or
the battery power has been interrupt-
ed, the “Distance to empty” function
may not operate correctly.
The trip computer may not register
additional fuel if less than 6 liters (1.6
gallons) of fuel are added to the vehicle.
•
The fuel economy and distance to
empty may vary significantly based
on driving conditions, driving habits,
and condition of the vehicle.
•
The distance to empty is an estimate
OJD042056
OJD042057
of the available driving distance. This
Average speed (km/h or MPH)
Elapsed time
value may differ from the actual driv-
This mode calculates the average speed
This mode indicates the total time trav-
ing distance.
of the vehicle since the last average
eled since the last driving time reset.
speed reset.
Even if the vehicle is not in motion, the
Even if the vehicle is not in motion, the
driving time keeps going while the engine
average speed keeps going while the
is running.
engine is running.
The meter’s working range is from
Pressing the
button for more than 1
0:00~99:59.
second, when the average speed is dis-
Pressing the
button for more than 1
played, clears the average speed to zero
second, when the driving time is being
(---).
displayed, clears the driving time to zero
(0:00).
4 56
Features of your vehicle
If you want to change the interval of the
maintenance service schedule, we rec-
ommend that you consult an authorized
Kia dealer.
✽ NOTICE
•
If you reset the maintenance schedule,
when the displayed service schedule
has not elapsed or elapsed without
actual vehicle service, the displayed
service schedule on the LCD display
might not be match the actual service
OJD042059
OJD042061
schedule anymore.
Service mode
If you do not have your vehicle serviced
You should comply with the displayed
This mode calculates when you need a
according to the scheduled maintenance
service schedule on the LCD display
scheduled maintenance service (mileage
service on the LCD display, this LCD dis-
for the maintenance of your vehicle.
or days)
play will show the elapsed mileage or days.
•
If the battery is disconnected or dis-
charged, the displayed service sched-
If you want to see the service mode when
ule might not match the actual service
other modes are displayed, press the ▲
If you want to reset the maintenance
schedule.
or ▼ button less than 1 second.
schedule, when the service required mes-
sage is displayed :
- Press the
button more than 5 sec-
onds.
- "
: Reset" will be shown on the LCD
display.
- Press the
button again more than 1
second.
If you do not press the
button within 5
seconds, "
: Reset" will disappear.
4 57
Features of your vehicle
OJD042060
OJD042063
OJD042064
If service mode is not activated, the LCD
User Settings
1. Stop the vehicle with the ignition
display shows, like the above picture.
In this mode there are 3 kinds of the sub-
switch in the ON position or engine
In this case, we recommend that you
menu.
running.
consult an authorized Kia dealer.
2. Press the ▲ or ▼ button until the User
setting mode is displayed.
WARNING
3. With the User setting mode displayed,
Do not adjust the User Setting
press the
button until the screen
while driving. You may lose your
is changed.
steering control and cause severe
4. You can change the item by pressing
personal injury or accidents.
the ▲ or ▼ button and select an item
by pressing the
button.
4 58
Features of your vehicle
Door Menu
Lamp Menu
Settings Menu
• Auto Door Lock
• Headlamp delay (if equipped)
• Seat Easy Access (for Driver Position
Off - The auto door lock operation will be
If the headlamp delay function is checked :
Memory System equipped vehicle)
canceled.
The Headlamp delay and Headlamp
(if equipped)
Speed - All doors will be automatically
Welcome function will be activated.
If the seat easy access function is
locked when the vehicle speed
checked :
exceeds 15km/h (9.3mph).
The driver's seat will automatically move
• Welcome Light (if equipped)
Shift Lever - All doors will be automati-
If the welcome light function is checked :
forward or rearward for the driver to enter
cally locked if the shift lever
or exit the vehicle comfortably.
The welcome light function of puddle
is shifted from the P(Park)
lamp will activate.
position to the R(Reverse),
• Steering position (if equipped)
N(Neutral) or D(Drive) posi-
• Auto Triple Turn
If the steering position function is
tion. (for automatic transaxle
(One-touch triple turn signal)
checked:
shift lever)
If the auto triple turn function is checked :
The warning illuminates on the LCD dis-
play when the steering wheel is not
The lane change signals will blink 3 times
• Auto Door Unlock
aligned with the ENGINE STRAT/STOP
when the turn signal lever is moved
Off - The auto door unlock operation will
button in the ON position.
slightly.
be canceled.
Key Out - All doors will be automatically
• Shift indicator (for manual transaxle)
unlocked when the ignition key
If the shift indicator function is checked :
is removed from ignition switch
(or smart key is in the OFF
The shift indicator function will be activated.
position).
For more details, refer to
“Manual
transaxle shift indicator” in this chapter.
Shift Lever - All doors will be automati-
cally unlocked if the shift
lever is shifted to the
P(Park) position. (for auto-
matic transaxle shift lever)
4 59
Features of your vehicle
• AVG fuel ECO Reset
Auto Reset - The average fuel economy
will reset automatically
when you drive after refuel-
ing.
Manual Reset - The average fuel econo-
my will not reset auto-
matically when you drive
after refueling. You can
reset the average fuel
economy by pressing
the
button for more
than 1 second when the
average fuel economy is
displayed.
• Language
Choose the language you prefer within
the LCD display.
4 60
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст