KIA Sedona (2018 year). Manual — part 11

4 69

Features of your vehicle

Horn

To sound the horn, press the horn
symbols on your steering wheel.
Check the horn regularly to be sure it
operates properly.

✽

✽

NOTICE

To sound the horn, press the area
indicated by the horn symbol on
your steering wheel (see illustra-
tion). The horn will operate only
when this area is pressed.

OYP047052

Features of your vehicle

70

4

MIRRORS

Inside rearview mirror

Adjust the rearview mirror so that the
center view through the rear window
is seen. Make this adjustment before
you start driving.
Do not place objects in the rear seat or
cargo area which would interfere with
your vision through the rear window.

Day/night rearview mirror
(if equipped)

Make this adjustment before you
start driving and while the day/night
lever is in the day position.
Pull the day/night lever toward you to
reduce the glare from the headlights
of the vehicles behind you during
night driving.
Remember that you lose some
rearview clarity in the night position.

Electrochromic mirror with
HomeLink system (if equipped)

To operate the electric rearview mirror

Press the I button (1) to turn the
automatic- dimming function on. The
mirror indicator light will illuminate.
Press the O button (2) to turn the
automatic- dimming function off. The
mirror indicator light will turn off.

WARNING

- Mirror

adjustment

Do not adjust the rearview mirror
while the vehicle is moving. This
could result in loss of control.

WARNING

Do not modify the inside mirror
and don’t install a wide mirror. It
could result in injury, during an
accident or deployment of the
air bag.

OAM049023

Day

Night

OHD046025N

4 71

Features of your vehicle

HomeLink

®

Wireless Control System

Your new mirror comes with an inte-
grated HomeLink Universal
Transceiver, which allows you to pro-
gram the mirror to activate your
garage door(s), estate gate, home
lighting, etc. The mirror actually
learns the codes from your various
existing transmitters.

Retain the original transmitter for
future programming procedures (i.e.,
new vehicle purchase). It is also sug-
gested that upon the sale of the vehi-
cle, the programmed HomeLink but-
tons be erased for security purposes
(follow step 1 in the “Programming”
portion of this text).

Programming
Your vehicle may require the ignition
switch to be turned to the ACC posi-
tion for programming and/or opera-
tion of HomeLink. It is also recom-
mended that a new battery be
replaced in the hand-held transmitter
of the device being programmed to
HomeLink for quicker training and
accurate transmission of the radio-
frequency.
Follow these steps to train your
HomeLink mirror:

1. When programming the buttons for

the first time, press and hold the
left and center buttons (

,

)

simultaneously until the indicator
light begins to flash after approxi-
mately 20 seconds. (This proce-
dure erases the factory-set default
codes. Do not perform this step
when programming the additional
HomeLink buttons.)

OHD046305N

Glare detection sensor

Indicator light

Homelink buttons

OHD046306N

Flashing

Features of your vehicle

72

4

✽

✽

NOTICE

For non rolling code garage door
openers, follow steps 2 - 3.
For rolling code garage door open-
ers, follow steps 2 - 6.
For Canadian Programming, please
follow the Canadian Programming
section.
For help with determining whether
your garage door opener is non-
rolling code or rolling code, please
refer to the garage door openers
owner’s manual or

contact

HomeLink customer service at 1-
800-355-3515.

2. Press and hold the button on the

HomeLink system you wish to
train and the button on the trans-
mitter while the transmitter is
approximately 2-8 cm (1 to 3 inch-
es) away from the mirror. Do not
release the buttons until step 3
has been completed.

3. The HomeLink indicator light will

flash, first slowly and then rapidly.
When the indicator light flashes
rapidly, both buttons may be
released. (The rapid flashing light
indicates successful programming
of the new frequency signal.)

✽

✽

NOTICE

Some gate and garage door openers
may require you to replace step #3
with the “cycling” procedure noted
in the “Canadian Programming”
section of this document.

OHD046307N

Flashing

1-3inches

Transmitter

4 73

Features of your vehicle

Rolling code programming
To train a garage door opener (or other
rolling code equipped devices) with the
rolling code feature, follow these
instructions after completing the
“Programming” portion of this text. (A
second person may make the following
training procedures quicker & easier.)
4. Locate the “learn” or “smart” but-

ton on the device’s motor head
unit. Exact location and color of
the button may vary by product
brand. If there is difficulty locating
the “learn” or “smart” button, refer-
ence the device’s owner’s manual
or contact HomeLink at 1-800-
355-3515 or on the internet at
www.homelink.com.

5. Press and release the “learn” or

“smart” button on the device’s
motor head unit. You have 30 sec-
onds to complete step number 6.

6. Return to the vehicle and firmly

press and release the pro-
grammed HomeLink button up to
three times. The rolling code
equipped device should now rec-
ognize the HomeLink signal and
activate when the HomeLink but-
ton is pressed. The remaining two
buttons may now be programmed
if this has not previously been
done. Refer to the “Programming”
portion of this text.

Operating HomeLink
To operate, simply press the pro-
grammed HomeLink button.
Activation will now occur for the
trained product (garage door, securi-
ty system, entry door lock, estate
gate, or home or office lighting). For
convenience, the hand-held trans-
mitter of the device may also be used
at any time. The HomeLink Wireless
Controls System (once programmed)
or the original hand-held transmitter
may be used to activate the device
(e.g. garage door, entry door lock,
etc.). In the event that there are still
programming difficulties, contact
HomeLink at 1-800-355-3515 or on
the internet at www.homelink.com.

Features of your vehicle

74

4

Erasing programmed HomeLink
buttons

To erase the three programmed but-
tons (individual buttons cannot be
erased):
• Press and hold the left and center

buttons simultaneously, until the
indicator light begins to flash
(approximately 20 seconds).
Release both buttons. Do not hold
for longer than 30 seconds.

HomeLink is now in the train (or
learning) mode and can be pro-
grammed at any time.

Reprogramming a single
HomeLink button
To program a device to HomeLink
using a HomeLink button previously
trained, follow these steps:
1. Press and hold the desired

HomeLink button. Do NOT release
until step 4 has been completed.

2. When the indicator light begins to

flash slowly (after 20 seconds),
position the hand-held transmitter
2-8 cm (1 to 3 inches) away from
the HomeLink surface.

3. Press and hold the hand-held

transmitter button (or press and
“cycle” - as described in “Canadian
Programming”).

4. The HomeLink indicator light will

flash, first slowly and then rapidly.
When the indicator light begins to
flash rapidly, release both buttons.

The previous device has now been
erased and the new device can be
activated by pushing the HomeLink
button that has just been pro-
grammed. This procedure will not
affect any other programmed
HomeLink buttons.

OHD046306N

Flashing

4 75

Features of your vehicle

Canadian Programming
Garage & gate openers
During programming, your hand-held
transmitter may automatically stop
transmitting. Continue to press and
hold the HomeLink button (note steps
2 through 4 in the “Programming” por-
tion of this text) while you press and
re-press (“cycle”) your handheld
transmitter every two seconds until
the frequency signal has been
learned. The indicator light will flash
slowly and then rapidly after several
seconds upon successful training.

Accessories
If you would like additional informa-
tion on the HomeLink Wireless
Control System, HomeLink compati-
ble products, or to purchase other
accessories such as the HomeLink

®

Lighting Package, please contact
HomeLink at 1-800-355-3515 or on
the internet at www.homelink.com.

FCC ID: NZLZTVHL3
IC: 4112A-ZTVHL3

This device complies with part 15
of the FCC Rules.
Operation is subject to the following
two conditions:
1. This device may not cause harm-

ful interference, and

2. This device must accept any inter-

ference received, including inter-
ference that may cause undesired
operation.

The transceiver has been tested and
complies with FCC and Industry
Canada rules. Changes or modifica-
tions not expressly approved by the
party responsible for compliance
could void the user's authority to
operate the device.

Features of your vehicle

76

4

Conversation mirror

The mirror is a convenient feature to
help the front passenger talk with
rear passengers without turning the
head or body rearward.
To use the mirror, push the cover and
open it.
Close the cover after use.

Outside rearview mirror

Be sure to adjust the mirror angles
before driving.
Your vehicle is equipped with both
left-hand and right-hand outside
rearview mirrors. The mirrors can be
adjusted remotely with the remote
switch. The mirror heads can be fold-
ed back to prevent damage during an
automatic vehicle wash or when
passing through a narrow street.

The right outside rearview mirror is
convex. Objects seen in the mirror
are closer than they appear.
Use your interior rearview mirror or
direct observation to determine the
actual distance of following vehicles
when changing lanes.

OYP044055K

CAUTION -

Rearview
mirror

Do not scrape ice off the mirror
face; this may damage the sur-
face of the glass. If ice should
restrict the movement of the mir-
ror, do not force the mirror for
adjustment. To remove ice, use a
deicer spray, or a sponge or soft
cloth with very warm water.

4 77

Features of your vehicle

If the mirror is jammed with ice, do
not adjust the mirror by force. Use an
approved spray de-icer (not radiator
antifreeze) to release the frozen
mechanism or move the vehicle to a
warm place and allow the ice to melt.

Adjusting outside rearview mirror

Adjusting the rearview mirrors:
Press either the L (driver’s side) or R
(passenger’s side) button (1) to
select the rearview mirror you would
like to adjust when the ignition switch
is ACC or ON position.
Use the mirror adjustment control (2)
to position the selected mirror up,
down, left or right.
After adjustment, press the L or R
button (1) again to prevent inadver-
tent adjustment.

WARNING

- Mirror

adjustment

Do not adjust or fold the outside
rearview mirrors while the vehi-
cle is moving. This could result
in loss of control.

CAUTION -

Outside mirror

• The mirrors stop moving when

they reach the maximum
adjusting angles,

but the

motor continues to operate
while the switch is pressed.
Do not press the switch longer
than necessary, the motor
may be damaged.

• Do not attempt to adjust the

outside rearview mirror by
hand. Doing so may damage
the parts.

OYP044057K

Features of your vehicle

78

4

Reverse parking aid function
(if equipped)

While the vehicle is moving rear-
ward, the outside rearview mirror(s)
will move downward to aid reverse
parking. According to the position of
the outside rearview mirror switch
(1), the outside rearview mirror(s) will
operate as follows:

L/R : When the remote control outside

rearview mirror switch is select-
ed to the L (left) or R (right) posi-
tion, both outside rearview mir-
rors will move downward.

Neutral : When neither switch is

selected, the outside
rearview mirrors will not
operate.

The outside rearview mirrors will auto-
matically revert to their original posi-
tions under the following conditions:
1. The ignition switch is in the OFF

position.

2. Shift lever is moved to any position

except R (Reverse).

3. Remote control outside rearview

mirror switch is placed in the middle.

Folding the outside rearview mirror

Electric type

The outside rearview mirror can be
folded or unfolded by pressing the
switch when the ignition switch is
ACC or ON position as below.
Left (1) : The mirror will unfold.
Right (2) : The mirror will fold.

OYP046177

OYP044058K

4 79

Features of your vehicle

Center (AUTO, 3) :
The mirror will fold or unfold auto-
matically as follows:
• The mirror will fold or unfold when

the door is locked or unlocked by
the folding key or smart key.

• The mirror will fold or unfold when

the door is locked or unlocked by the
button on the outside door handle.

• The mirror will unfold when you

approach the vehicle (all doors
closed and locked) with a smart
key in possession.

Manual type

To fold the outside rearview mirror,
grasp the housing of the mirror and
then fold it toward the rear of the
vehicle.

OYP044269N

CAUTION -

Electric type

outside rearview mirror

The electric type outside
rearview mirror operates even
though the engine start/stopo
button is in the OFF position.
However, to prevent unneces-
sary battery discharge, do not
adjust the mirrors longer than
necessary while the engine is
not running.
In case it is an electric type out-
side rearview mirror, don’t fold it
by hand. It could cause motor
failure.

Features of your vehicle

80

4

Blind zone mirror (if equipped)

The Blind Zone Mirror (BZM) is a
supplemental mirror that reduces the
driver’s blind zone by showing the
rear side area of the vehicle. The
blind zone mirror is equipped on the
left-hand outside rearview mirror.

CAUTION

Do not clean the mirror with
harsh abrasives, fuel or other
petroleum based cleaning prod-
ucts.

OYP044267N

OYP044268N

WARNING

• Always check the road condi-

tion while driving for unexpect-
ed situations even though the
vehicle is equipped with a blind
zone mirror.

• The blind zone mirror is a

device made for convenience.
Do not solely rely on the mirror
but always pay attention to traf-
fic around you.

4 81

Features of your vehicle

INSTRUMENT CLUSTER

1. Tachometer

2. Speedometer

3. Engine coolant temperature gauge

4. Fuel gauge

5. LCD display

6. Warning and indicator lights

OYP046308N/OYP046101N/OYP046100N

■

■

Type A

❈

The actual cluster in the vehicle may differ

from the illustration.
For more details, refer to the "Gauges" in
this chapter.

■

■

Type B

■

■

Type C

Features of your vehicle

82

4

Instrument Cluster Control

Adjusting Instrument Cluster
Illumination

The brightness of the instrument
panel illumination is changed by
pressing the illumination control button
("+" or "-") when the ignition switch or
Engine Start/Stop button is ON, or the
tale lights are turned on.

• If you hold the illumination control

button ("+" or "-"), the brightness
will be changed continuously.

• If the brightness reaches to the

maximum or minimum level, an
alarm will sound.

LCD Display Control

The LCD display modes can be
changed by using the control buttons
on the steering wheel.

[Type A]
(1)

▲

/

▼

: TRIP scroll switch for

changing trip modes

(2) RESET : RESET button for reset-

ting items

OYP044059K

OYP044300N

OYP044157N

■

Type A

■

Type B, C

OYP047060N

■

Type A

4 83

Features of your vehicle

[Type B, C]
(1)

: MODE button for changing

modes

(2)

▲

/

▼

/ OK : SELECT

scroll

switch for setting the
selected item and
RESET scroll switch
for resetting items

(3)

: RETURN button for move

the previous mode or item (if
equipped)

❈

For the LCD modes, refer to “LCD
Display” in this chapter.

Gauges

Speedometer

The speedometer indicates the
speed of the vehicle and is calibrated
in miles per hour (mph) and/or kilo-
meters per hour (km/h).

Tachometer

The tachometer indicates the
approximate number of engine revo-
lutions per minute (rpm).
Use the tachometer to select the cor-
rect shift points and to prevent lug-
ging and/or over-revving the engine.

OYP047060

■

Type B, C

OYP046102N

OYP044103N

Features of your vehicle

84

4

Engine Coolant Temperature
Gauge

This gauge indicates the tempera-
ture of the engine coolant when the
ignition switch or Engine Start/Stop
button is ON.

If the gauge pointer moves beyond
the normal range area toward the “H”
position, it indicates overheating that
may damage the engine.
Do not continue driving with an over-
heated engine. If your vehicle over-
heats, refer to “If the Engine
Overheats” in chapter 6.

CAUTION -

Red zone

Do not operate the engine with-
in the tachometer's RED ZONE.
This may cause severe engine
damage.

OYP044105K

■

Type A, B

■

Type C

WARNING -

Hot radiator

Never remove the radiator cap
when the engine is hot. The
engine coolant is under pressure
and could severely burn. Wait
until the engine is cool before
adding coolant to the reservoir.