Kia Stonic (2018 year). Manual — part 12
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)
1. Temperature control knob
2. AUTO (automatic control) button
3. Climate control display
4. Fan speed control knob
5. OFF button
6. Front windshield defroster button
7. Rear window defroster button
8. Mode selection button
9. Air conditioning button (if equipped)
10. Air intake control button
CAUTION
Operating the blower when the igni‐
tion switch is in the ON position
could cause the battery to discharge.
Operate the blower when the engine
is running.
Features of your vehicle
4-108
Automatic heating and air
conditioning
1. Push the AUTO button. The modes,
fan speeds, air intake and air-con‐
ditioning will be controlled auto‐
matically according to the temper‐
ature setting.
2. Set the temperature control knob
to set the desired temperature.
NOTICE
• To turn the automatic operation
off, select any button or switch of
the following:
- Mode selection button
- Air conditioning button
(Continued)
(Continued)
- Front windshield defroster but‐
ton (Press the button one more
time to deselect the front wind‐
shield defroster function. The
AUTO sign will illuminate on the
information display once again.)
- Air intake control button
- Fan speed control knob
The selected function will be con‐
trolled manually while other func‐
tions operate automatically.
• For your convenience and to im‐
prove the effectiveness of the cli‐
mate control, use the AUTO but‐
ton and set the temperature to
23°C (73°F).
4-109
4
Featur
es of your v
ehicle
NOTICE
Never place anything over the sen‐
sor located on the instrument panel
to ensure better control of the heat‐
ing and cooling system.
Manual heating and air
conditioning
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this
case, the system works sequentially
according to the order of buttons selec‐
ted.
When pressing any button (or turning
any knob) except the AUTO button
while using automatic operation, the
functions not selected will be controlled
automatically.
1. Start the engine.
2. Set the mode to the desired posi‐
tion.
To improve the effectiveness of
heating and cooling:
- Heating:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to the
outside (fresh) air position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn
the air conditioning system on.
Press the AUTO button in order to con‐
vert to full automatic control of the
system.
Mode selection
The mode selection button controls the
direction of the air flow through the
ventilation system.
The air flow outlet port is converted as
follows:
Refer to the illustration in the Manual
climate control system on page 4-99 .
Features of your vehicle
4-110
Floor & Defrost (A, C, D, E)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
Face-Level (B, D)
Air flow is directed toward the upper
body and face. Additionally, each outlet
can be controlled to direct the air dis‐
charged from the outlet.
Bi-Level (B, D, C, E)
Air flow is directed towards the face
and the floor.
Floor-Level (C, A, D, E)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and
side window defrosters.
Defrost mode
When you select the defrost mode, the
following system settings will be made
automatically:
• The air conditioning system will be
turned on.
• The outside (fresh) air position will be
selected.
• The fan speed will be set to the high
speed.
To turn the defrost mode off, press the
mode button or defrost button again or
AUTO button.
Instrument panel vents
OYB047304
The outlet port can be opened or closed
separately using the horizontal thumb‐
wheel. To close the vent, rotate it
downward to the maximum position. To
open the vent, rotate it upward to the
desired position.
Also, you can adjust the direction of air
delivered from these vents using the
vent control lever as shown.
4-111
4
Featur
es of your v
ehicle
Temperature control
The temperature will increase to the
maximum (HI) by turning the knob to
the right extremely.
The temperature will decrease to the
minimum (Lo) by turning the knob to
the left extremely.
When turning the knob, the tempera‐
ture will increase or decrease by 0.5°C/
1°F. When set to the lowest tempera‐
ture setting, the air conditioning will
operate continuously.
Temperature conversion
You can switch the temperature mode
between Centigrade to Fahrenheit as
follows:
While pressing the OFF button, press
the AUTO button for 4 seconds or
more.
The display will change from Centi‐
grade to Fahrenheit, or from Fahrenheit
to Centigrade.
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Centigrade.
Air intake control
This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi‐
tion, press the control button.
Recirculated air position
With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat‐
ing system and heated
or cooled according to
the function selected.
Outside (fresh) air position
With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.
NOTICE
Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas‐
(Continued)
Features of your vehicle
4-112
(Continued)
senger compartment may become
stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in exces‐
sively dry air in the passenger com‐
partment.
WARNING
• Continued climate control system
operation in the recirculated air
position may allow humidity to in‐
crease inside the vehicle which
may fog the glass and obscure vis‐
ibility.
• Do not sleep in a vehicle with the
air conditioning or heating system
on. It may cause serious harm or
death due to a drop in the oxygen
level and/or body temperature.
(Continued)
(Continued)
• Continued climate control system
operation in the recirculated air
position can cause drowsiness or
sleepiness, and loss of vehicle con‐
trol. Set the air intake control to
the outside (fresh) air position as
much as possible while driving.
Fan speed control
The fan speed can be set to the desired
speed by operating the fan speed con‐
trol knob.
The higher the fan speed is, the more
air is delivered.
Pressing the OFF button turns off the
fan.
Air conditioning (A/C)
Press the A/C button to turn the air
conditioning system on (indicator light
will illuminate).
Press the button again to turn the air
conditioning system off.
4-113
4
Featur
es of your v
ehicle
OFF mode
Press the OFF button to turn off the air
climate control system. However, you
can still operate the air intake buttons
as long as the ignition switch is in the
ON position.
System operation
Ventilation
1. Set the mode to the
position.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
1. Set the mode to the
position.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If dehumidified heating is desired,
turn the air conditioning system (if
equipped) on.
• If the windshield fogs up, set the
mode to the
or
position.
Operation Tips
• To keep dust or unpleasant fumes
from entering the vehicle through the
ventilation system, temporarily set
the air intake control to the recircula‐
ted air position. Be sure to return the
control to the fresh air position when
the irritation has passed to keep
fresh air in the vehicle. This will help
keep the driver alert and comforta‐
ble.
• Air for the heating/cooling system is
drawn in through the grilles just
ahead of the windshield. Care should
be taken that these are not blocked
by leaves, snow, ice or other obstruc‐
tions.
• To prevent interior fog on the wind‐
shield, set the air intake control to
the fresh air position and fan speed
to the desired position, turn on the
air conditioning system, and adjust
the temperature control to desired
temperature.
Air conditioning
Kia Air Conditioning Systems are filled
with environmentally friendly refriger‐
ant
*
.
1. Start the engine. Push the air con‐
ditioning button.
2. Set the mode to the
position.
*
Your vehicle is filled with R-134a or
R-1234yf according to the regula‐
tion in your country at the time of
producing. You can find out which air
conditioning refrigerant is applied
your vehicle at the label inside of en‐
gine room. Refer to Refrigerant la‐
bel on page 9-22 for more detail
location of air conditioning refriger‐
ant label.
Features of your vehicle
4-114
3. Set the air intake control to the
outside air or recirculated air posi‐
tion.
4. Adjust the fan speed control and
temperature control to maintain
maximum comfort.
CAUTION
• The refrigerant system should on‐
ly be serviced by trained and certi‐
fied technicians to insure proper
and safe operation.
• The refrigerant system should be
serviced in a well-ventilated place.
• The air conditioning evaporator
(cooling coil) shall never be re‐
paired or replaced with one re‐
moved from a used or salvaged
vehicle and new replacement MAC
evaporators shall be certified (and
labeled) as meeting SAE Standard
J2842.
NOTICE
• When using the air conditioning
system, monitor the temperature
gauge closely while driving up hills
or in heavy traffic when outside
temperatures are high. Air condi‐
tioning system operation may
cause engine overheating. Contin‐
ue to use the blower fan but turn
the air conditioning system off if
the temperature gauge indicates
engine overheating.
• When opening the windows in hu‐
mid weather air conditioning may
create water droplets inside the
vehicle. Since excessive water
droplets may cause damage to
electrical equipment, air condition‐
ing should only be used with the
windows closed.
Air conditioning system operation tips
• If the vehicle has been parked in di‐
rect sunlight during hot weather,
open the windows for a short time to
let the hot air inside the vehicle es‐
cape.
• To help reduce moisture inside of the
windows on rainy or humid days, de‐
crease the humidity inside the vehicle
by operating the air conditioning sys‐
tem.
• During air conditioning system opera‐
tion, you may occasionally notice a
slight change in engine speed as the
air conditioning compressor cycles.
This is a normal system operation
characteristic.
• Use the air conditioning system every
month only for a few minutes to en‐
sure maximum system performance.
• When using the air conditioning sys‐
tem, you may notice clear water
dripping (or even puddling) on the
ground under the passenger side of
the vehicle. This is a normal system
operation characteristic.
• Operating the air conditioning system
in the recirculated air position pro‐
vides maximum cooling, however,
continual operation in this mode may
cause the air inside the vehicle to be‐
come stale.
• During cooling operation, you may oc‐
casionally notice a misty air flow be‐
cause of rapid cooling and humid air
intake. This is a normal system oper‐
ation characteristic.
4-115
4
Featur
es of your v
ehicle
Climate control air filter (if
equipped)
A : Outside air
B : Recirculated air
C : Climate control air filter
D : Blower
E : Evaporator core
F : Heater core
The climate control air filter installed
behind the glove box filters the dust or
other pollutants that come into the ve‐
hicle from the outside through the
heating and air conditioning system.
If dust or other pollutants accumulate
in the filter over a period of time, the
air flow from the air vents may de‐
crease, resulting in moisture accumula‐
tion on the inside of the windshield
even when the outside (fresh) air posi‐
tion is selected. If this happens, have
the climate control air filter replaced by
a professional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
NOTICE
• Replace the filter according to the
Maintenance Schedule.
If the vehicle is being driven in se‐
vere conditions such as dusty or
rough roads, more frequent air
conditioner filter inspections and
changes are required.
• When the air flow rate suddenly
decreases, have the system
checked by a professional work‐
shop. Kia recommends to visit an
authorized Kia dealer/service part‐
ner.
Air Conditioning refrigerant label
■ Example
Type A
Type B
❈
The actual Air Conditioning refriger‐
ant label in the vehicle may differ
from the illustration.
Features of your vehicle
4-116
Each symbols and specification on air
conditioning refrigerant label means as
below ;
1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of Compressor lubri‐
cant
You can find out which air conditioning
refrigerant is applied your vehicle at
the label inside of the engine room.
Refer to Refrigerant label on page
9-22 for more detailed location of the
air conditioning refrigerant label.
Checking the amount of air
conditioner refrigerant and
compressor lubricant
When the amount of refrigerant is low,
the performance of the air conditioning
is reduced. Overfilling also has a bad in‐
fluence on the air conditioning system.
Therefore, if abnormal operation is
found, have the system inspected by a
professional workshop.
Kia recommends to visit an authorized
Kia dealer/service partner.
WARNING
n Vehicles
equipped
with
R-134a
*
Because the refrigerant is
at very high pressure, the
air conditioning system
should only be serviced
by trained and certified
technicians.
It is important that the correct type
and amount of oil and refrigerant is
used.
Otherwise, it may cause damage to
the vehicle and personal injury.
*
Your vehicle is filled with R-134a or
R-1234yf according to the regula‐
tion in your country at the time of
producing. You can find out which air
conditioning refrigerant is applied
your vehicle at the label inside of en‐
gine room. Refer to Refrigerant la‐
bel on page 9-22 for more detail
location of air conditioning refriger‐
ant label.
WARNING
n Vehicles
equipped
with
R-1234yf
*
Because the refrigerant is
mildly inflammable and at
very high pressure, the
air conditioning system
should only be serviced
by trained and certified
technicians.
It is important that the correct type
and amount of oil and refrigerant is
used.
Otherwise, it may cause damage to
the vehicle and personal injury.
*
Your vehicle is filled with R-134a or
R-1234yf according to the regula‐
tion in your country at the time of
producing. You can find out which air
conditioning refrigerant is applied
your vehicle at the label inside of en‐
gine room. Refer to Refrigerant la‐
bel on page 9-22 for more detail
location of air conditioning refriger‐
ant label.
4-117
4
Featur
es of your v
ehicle
WINDSHIELD DEFROSTING AND DEFOGGING
WARNING
n Windshield heating
Do not use the
or
position
during cooling operation in extreme‐
ly humid weather. The difference be‐
tween the temperature of the out‐
side air and that of the windshield
could cause the outer surface of the
windshield to fog up, causing loss of
visibility. In this case, set the mode
selection knob or button to the
position and fan speed control knob
or button to the lower speed.
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set the
mode to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window,
outside rear view mirrors, and all side
windows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to im‐
prove heater and defroster efficiency
and to reduce the probability of fog‐
ging up the inside of the windshield.
Manual climate control system
To defog inside windshield
1. Select any fan speed except 0 po‐
sition.
2. Select the desired temperature.
3. Select the
or
position.
4. The outside (fresh) air and air con‐
ditioning will be selected automati‐
cally.
If the air conditioning and outside
(fresh) air position are not selected au‐
tomatically, press the corresponding
button manually.
To defrost outside windshield
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the ex‐
treme hot position.
3. Select the
position.
4. The outside (fresh) air and air con‐
ditioning will be selected automati‐
cally.
Features of your vehicle
4-118
Automatic climate control
system
To defog inside windshield
1. Set the fan speed to the desired
position.
2. Select desired temperature.
3. Press the defroster button (
).
4. The air conditioning will be turned
on according to the detected ambi‐
ent temperature and outside
(fresh) air position will be selected
automatically.
If the air conditioning and outside
(fresh) air position are not selected au‐
tomatically, adjust the corresponding
button manually. If the
position is
selected, lower fan speed is adjusted to
a higher fan speed.
To defrost outside windshield
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the ex‐
treme hot (HI) position.
3. Press the defrost button (
).
4. The air conditioning will be turned
on according to the detected ambi‐
ent temperature and outside
(fresh) air position will be selected
automatically.
If the
position is selected, lower fan
speed is adjusted to a higher fan speed.
Defogging logic (if equipped)
To reduce the possibility of fogging up
the inside of the windshield, the air in‐
take or air conditioning are controlled
automatically according to certain con‐
ditions such as
or
position. To
cancel or return to the defogging logic,
do the following.
Manual climate control system
4-119
4
Featur
es of your v
ehicle
1. Turn the ignition switch to the ON
position.
2. Turn the mode selection knob to
the defrost position (
).
3. Push the air intake control button
at least 5 times within 3 seconds.
The indicator light in the air intake con‐
trol button will blink 3 times. It indi‐
cates that the defogging logic is can‐
celed or returned to the programmed
status.
If the battery has been discharged or
disconnected, it resets to the defog
logic status.
Automatic climate control system
(if equipped)
1. Turn the ignition switch to the ON
position.
2. Select the defrost position pressing
defrost button (
).
3. While holding the air conditioning
button (A/C) pressed, press the air
intake control button at least 5
times within 3 seconds.
The A/C display blinks 3 times. It indi‐
cates that the defogging logic is can‐
celed or returned to the programmed
status.
If the battery has been discharged or
disconnected, it is reset to the defog
logic status.
Auto defogging system (Only for
automatic climate control system,
if equipped)
Auto defogging reduces the possibility
of fogging up the inside of the wind‐
shield by automatically sensing the
moisture of inside the windshield and
air flow toward the windshield can in‐
crease.
The auto defogging system operates
when the AUTO mode is on.
For Europe
If your vehicle is equipped with the auto
defogging system, it is automatically
activated when the conditions are met.
Features of your vehicle
4-120
When the auto fogging system senses
moisture inside of the windshield, air
flow towards the windshield can in‐
crease.
However, if you would like to deactivate
the auto defogging system, keep the
front defroster button pressed longer
than 3 seconds.
The ADS OFF symbol will be shown in
the climate display to inform you that
the system is deactivated.
To re-activate the auto defogging sys‐
tem again, follow the procedure men‐
tioned above and the ADS OFF symbol
will disappear.
If the battery has been disconnected or
discharged, it resets to the auto defog‐
ging status.
Except Europe
This indicator illuminates
when the auto defogging
system senses the moisture
of inside the windshield and
operates.
If more moisture is in the vehicle, high‐
er steps operate as follow.
Step 1 : Operating the air conditioning
Step 2 : Outside air position
Step 3 : Blowing air flow toward the
windshield
Step 4 : Increasing air flow toward the
windshield
If your vehicle is equipped with the auto
defogging system, it is automatically
activated when the conditions are met.
However, if you would like to deactivate
the auto defogging system, keep the
front defroster button pressed longer
than 3 seconds.
The ADS OFF symbol will be shown in
the climate display to inform you that
the system is deactivated.
To re-activate the auto defogging sys‐
tem again, follow the procedure men‐
tioned above and the ADS OFF symbol
will disappear.
If the battery has been disconnected or
discharged, it resets to the auto defog‐
ging status.
4-121
4
Featur
es of your v
ehicle
STORAGE COMPARTMENTS
These compartments can be used to
store small items required by the driver
or passengers.
CAUTION
• To avoid possible theft, do not
leave valuables in the storage
compartments.
• Always keep the storage compart‐
ment covers closed while driving.
Do not attempt to place so many
items in the storage compartment
that the storage compartment
cover cannot close securely.
WARNING
n Flammable materials
Do not store cigarette lighters, pro‐
pane cylinders, or other flammable/
explosive materials in the vehicle.
These items may catch fire and/or
explode if the vehicle is exposed to
hot temperatures for extended peri‐
ods.
Center console storage (if
equipped)
These compartments can be used to
store small items required by the driver
or front passenger.
To open the center console storage pull
up the lever .
Glove box
To open the glove box, pull the handle
and the glove box will automatically
open. Close the glove box after use.
WARNING
To reduce the risk of injury in an ac‐
cident or sudden stop, always keep
the glove box door closed while driv‐
ing.
Features of your vehicle
4-122
CAUTION
Do not keep food in the glove box for
a long time.
Sunglass holder (if equipped)
To open the sunglass holder, press the
cover and the holder will slowly open.
Place your sunglasses with the lenses
facing out. To close the sunglass holder,
push it up.
WARNING
• Do not keep objects except sun‐
glasses inside the sunglass holder.
Such objects can be thrown from
the holder in the event of a sudden
stop or an accident, possibly injur‐
ing the passengers in the vehicle.
• Do not open the sunglass holder
while the vehicle is moving. The
rear view mirror of the vehicle can
be blocked by an opened sunglass
holder.
• Do not put the glasses forcibly into
a sunglass holder to prevent
breakage or deformation of the
glasses. It may cause personal in‐
jury if you try to open it forcibly
when the glasses are jammed in
the holder.
Luggage net holder (if equipped)
To keep items from shifting in the car‐
go area, you can use the 4 holders loca‐
ted in the cargo area to attach the lug‐
gage net.
If necessary, Kia recommends to con‐
tact an authorized Kia dealer/service
partner.
CAUTION
To prevent damage to the goods or
the vehicle, care should be taken
when carrying fragile or bulky ob‐
jects in the luggage compartment.
4-123
4
Featur
es of your v
ehicle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст