KIA Stinger (2018 year). Manual — part 30

7 49

Maintenance

GVWR:

Gross Vehicle Weight Rating

GAWR FRT:

Gross Axle Weight

Rating for the Front Axle.

GAWR RR:

Gross Axle Weight

Rating for the Rear axle.

Intended Outboard Sidewall:

The

side of an asymmetrical tire, that
must always face outward when
mounted on a vehicle.

Kilopascal (kPa):

The metric unit for

air pressure.

Light truck(LT) tire:

A tire designat-

ed by its manufacturer as primarily
intended for use on lightweight trucks
or multipurpose passenger vehicles.

Load Index:

An assigned number

ranging from 1 to 279 that corre-
sponds to the load carrying capacity
of a tire.

Load ratings:

The maximum load

that a tire is rated to carry for a given
inflation pressure.

Maximum Inflation Pressure:

The

maximum air pressure to which a
cold tire may be inflated. The maxi-
mum air pressure is molded onto the
sidewall.

Maximum Load Rating:

The load

rating for a tire at the maximum per-
missible inflation pressure for that
tire.

Maximum Loaded Vehicle Weight:

The sum of curb weight; accessory
weight; vehicle capacity weight; and
production options weight.

Normal Occupant Weight:

The

number of occupants a vehicle is
designed to seat multiplied by 150
lbs. (68kg).

Occupant Distribution:

Designated

seating positions.

Outward Facing Sidewall:

The side

of a asymmetrical tire that has a par-
ticular side that faces outward when
mounted on a vehicle. The outward
facing sidewall bears white lettering
or bears manufacturer, brand, and/or
model name molding that is higher or
deeper than the same moldings on
the inner facing sidewall.

Passenger (P-Metric) Tire:

A tire

used on passenger cars and some
light duty trucks and multipurpose
vehicles.

Ply:

A layer of rubber-coated parallel

cords

Pneumatic tire:

A mechanical

device made of rubber, chemicals,
fabric and steel or other materials,
that, when mounted on an automo-
tive wheel, provides the traction and
contains the gas or fluid that sustains
the load.

Maintenance

50

7

Production options weight:

The

combined weight of installed regular
production options weighing over 5
lb.(2.3 kg) in excess of the standard
items which they replace, not previ-
ously considered in curb weight or
accessory weight, including heavy
duty brakes, ride levelers, roof rack,
heavy duty battery, and special trim.

Recommended Inflation Pressure:

Vehicle manufacturer's recommend-
ed tire inflation pressure and shown
on the tire placard.

Radial Ply Tire:

A pneumatic tire in

which the ply cords that extend to the
beads are laid at 90 degrees to the
centerline of the tread.

Rim:

A metal support for a tire and

upon which the tire beads are seat-
ed.

Sidewall:

The portion of a tire

between the tread and the bead.

Speed Rating:

An alphanumeric

code assigned to a tire indicating the
maximum speed at which a tire can
operate.

Traction:

The friction between the

tire and the road surface. The
amount of grip provided.

Tread:

The portion of a tire that

comes into contact with the road.

Treadwear Indicators:

Narrow

bands, sometimes called "wear
bars," that show across the tread of a
tire when only 1/16 inch of tread
remains.

UTQGS:

Uniform Tire Quality

Grading Standards, a tire information
system that provides consumers with
ratings for a tire's traction, tempera-
ture and treadwear. Ratings are
determined by tire manufacturers
using government testing proce-
dures. The ratings are molded into
the sidewall of the tire.

Vehicle Capacity Weight:

The num-

ber of designated seating positions
multiplied by 150 lbs. (68kg) plus the
rated cargo and luggage load.

Vehicle Maximum Load on the
Tire:

Load on an individual tire due

to curb and accessory weight plus
maximum occupant and cargo
weight.

Vehicle Normal Load on the Tire:

Load on an individual tire that is
determined by distributing to each
axle its share of the curb weight,
accessory weight, and normal occu-
pant weight and driving by 2.

Vehicle Placard:

A label permanent-

ly attached to a vehicle showing the
original equipment tire size and rec-
ommended inflation pressure.

7 51

Maintenance

All season tires

Kia specifies all season tires on
some models to provide good per-
formance for use all year round,
including snowy and icy road condi-
tions. All season tires are identified
by ALL SEASON and/or M+S (Mud
and Snow) on the tire sidewall. Snow
tires have better snow traction than
all season tires and may be more
appropriate in some areas.

Summer tires

Kia specifies summer tires on some
models to provide superior perform-
ance on dry roads. Summer tire per-
formance is substantially reduced in
snow and ice. Summer tires do not
have the tire traction rating M+S
(Mud and Snow) on the tire side wall.
If you plan to operate your vehicle in
snowy or icy conditions, Kia recom-
mends the use of snow tires or all
season tires on all four wheels.

Snow tires

If you equip your car with snow tires,
they should be the same size and
have the same load capacity as the
original tires. Snow tires should be
installed on all four wheels; other-
wise, poor handling may result.
Snow tires should carry 4 psi (28
kPa) more air pressure than the
pressure recommended for the stan-
dard tires on the tire label on the dri-
ver's side of the center pillar, or up to
the maximum pressure shown on the
tire sidewall, whichever is less.
Do not drive faster than 75 mph (120
km/h) when your vehicle is equipped
with snow tires.

Tire chains

Tire chains, if necessary, should be
installed on the rear wheels.
Be sure that the chains are installed
in accordance with the manufactur-
er's instructions.
To minimize tire and chain wear, do
not continue to use tire chains when
they are no longer needed.
• When driving on roads covered

with snow or ice, drive at less than
20 mph (30 km/h).

• Use AutoSock fabric snow chain.
• If you hear noise caused by chains

contacting the body, retighten the
chain to avoid contact with the
vehicle body.

• To prevent body damage, retighten

the chains after driving 0.3~0.6
miles (0.5~1.0 km).

Maintenance

52

7

Radial-ply tires

Radial-ply tires provide improved
tread life, road hazard resistance and
smoother high speed ride. The radi-
al-ply tires used on this vehicle are
of belted construction and are select-
ed to complement the ride and han-
dling characteristics of your vehicle.
Radial-ply tires have the same load
carrying capacity as bias-ply or bias
belted tires of the same size and use
the same recommended inflation
pressure. Mixing of radial-ply tires
with bias-ply or bias belted tires is
not recommended. Any combina-
tions of radial-ply and bias-ply or bias
belted tires when used on the same
vehicle will seriously deteriorate
vehicle handling. The best rule to fol-
low is: identical radial-ply tires should
always be used as a set of four.

Longer wearing tires can be more
susceptible to irregular tread wear. It
is very important to follow the tire
rotation interval shown in this section
to achieve the tread life potential of
these tires. Cuts and punctures in
radial-ply tires are repairable only in
the tread area, because of sidewall
flexing. Consult your tire dealer for
radial-ply tire repairs.

Low aspect ratio tire
(if equipped)

Low aspect ratio tires, whose aspect
ratio is lower than 50, are provided
for sporty looks.
Because the low aspect ratio tires
are optimized for handling and brak-
ing, it may be more uncomfortable to
ride in and there is more noise com-
pare with normal tires.

7 53

Maintenance

• It is not easy to recognize the tire

damage with your own eyes. But if
there is the slightest hint of tire
damage, even though you cannot
see it, have the tire checked or
replaced because the tire damage
may cause air leakage from the tire.

• If the tire is damaged by driving on

a rough road, off road, pothole,
manhole, or curb stone, it will not
be covered by the warranty.

• You can find out the tire information

on the tire sidewall.

CAUTION

Because the sidewall of the low
aspect ratio tire is shorter than
the normal, the wheel and tire of
the low aspect ratio tire is easi-
er to be damaged. So, follow the
instructions below.
• When driving on a rough road

or off road, drive cautiously
because tires and wheels may
be damaged. And after driv-
ing, inspect tires and wheels.

• When passing over a pothole,

speed bump, manhole, or curb
stone, drive slowly so that the
tires and wheels are not dam-
aged.

• If the tire is impacted, we rec-

ommend that you inspect the
tire condition or contact an
authorized Kia dealer.

• To prevent damage to the tire,

inspect the tire condition and
pressure every 1,900 miles
(3,000 km).

Maintenance

54

7

FUSES

❈ Left side : Normal , Right side : Blown

A vehicle’s electrical system is pro-
tected from electrical overload dam-
age by fuses.
This vehicle has 4 (or 5) fuse panels,
one located in the driver’s side panel
bolster, the other in the engine com-
partment near the battery.
If any of your vehicle’s lights, acces-
sories, or controls do not work, check
the appropriate circuit fuse. If a fuse
has blown, the element inside the
fuse will melt.
If the electrical system does not
work, first check the driver’s side
fuse panel.
Always replace a blown fuse with
one of the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and imme-
diately consult an authorized Kia
dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.

• Do not arbitrarily modify or add-on

electric wiring to the vehicle.

WARNING

- Fuse replace-

ment

• Never replace a fuse with any-

thing but another fuse of the
same rating.

• A higher capacity fuse could

cause damage and possibly a
fire.

• Never install a wire or alu-

minum foil instead of the
proper fuse - even as a tem-
porary repair. It may cause
extensive wiring damage and
a possible fire.

CAUTION

Do not use a screwdriver or any
other metal object to remove
fuses because it may cause a
short circuit and damage the
system.

OCK077071

■ Blade type

■ Cartridge type

■ Multi fuse

■ Fusible link

7 55

Maintenance

✽

✽

NOTICE

• When replacing fuse, turn the

ignition “OFF” and turn off
switches of all electrical devices
then remove battery (-) terminal.

• The actual fuse/relay panel label

may differ from equipped items.

WARNING

- Electrical Fire

Always ensure replacements
fuses and relays are securely
fastened when installed. Failure
to do so can result in a vehicle
fire.

CAUTION

• When replacing a blown fuse

or relay, make sure the new
fuse or relay fits tightly into
the clips. Failure to tightly
install the fuse or relay may
cause damage to the wiring
and electric systems.

• Do not remove fuses, relays

and terminals fastened with
bolts or nuts. The fuses, relays
and terminals may not be fas-
tened correctly which may
cause vehicle damage.

CAUTION

• Do not input any other objects

except fuses or relays into
fuse/relay terminals such as a
driver or wiring. It may cause
contact failure and system
malfunction.

• Do not plug in screwdrivers or

aftermarket wiring into the ter-
minal originally designed for
fuse and relays only. The elec-
trical system and wiring of the
vehicle interior may be dam-
aged or burned due to contact
failure.

• If you directly connect the

wire on the taillight or replace
the bulb which is over the reg-
ulated capacity to install trail-
ers etc., the inner junction
block can get burned.

Maintenance

56

7

✽

✽

NOTICE

- Remodeling

Prohibited

Do not rewire your vehicle in any
way as doing so may affect the per-
formance of several safety features
in your vehicle. Rewiring your vehi-
cle may also void your warranty and
cause you to be responsible for any
subsequent vehicle damage which
may result.

✽

✽

NOTICE

- Window tinting

precaution

Window tint(especially metallic
film) might cause communication
disorder or poor radio reception,
and malfunction of the automatic
lighting system due to excessive
change of illumination inside the
vehicle. The solution used might also
flow into electric, electronic devices
causing disorder and failure.

Inner panel fuse replacement

1. Turn the ignition switch and all

other switches off.

2. Open the fuse panel cover.
If the switch is located in the “OFF”
position, a caution indicator will be
displayed in the cluster.

CAUTION

Visually inspect the battery cap
to ensure it is securely closed.
If the battery cap is not securely
closed, moisture may enter the
system and damage the electri-
cal components.

WARNING

- Electrical wiring repairs

All electrical repairs should be
performed by authorized Kia
dealerships using approved Kia
parts. Using other wiring com-
ponents, especially when retro-
fitting AVN or theft alarm sys-
tem, remote engine control, car
phone or radio may cause vehi-
cle damage and increase the
risk of a vehicle fire.

OCK077032

7 57

Maintenance

3. Pull the suspected fuse straight

out. Use the removal tool provided
on the engine compartment fuse
panel cover.

4. Check the removed fuse; replace it

if it is blown.

Spare fuses are provided in the
engine compartment fuse panel.

5. Push in a new fuse of the same

rating, and make sure it fits tightly
in the clips.

If it fits loosely, consult an authorized
Kia dealer.

If you do not have a spare, use a
fuse of the same rating from a circuit
you may not need for operating the
vehicle, such as the power outlet
fuse.
If the head lamp, turn signal lamp,
stop signal lamp, fog lamp, DRL, tail
lamp, HMSL do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced.

✽

✽

NOTICE

If the headlamp, fog lamp, turn sig-
nal lamp, or tail lamp malfunction
even without any problem to the
lamps, have the vehicle checked by
an authorized Kia dealer for assis-
tance.

Fuse switch

Always set the fuse switch to the ON
position before using the vehicle.
If you move the switch to the OFF
position, some items such as audio
and digital clock must be reset and
transmitter (or smart key) may not
work properly. When the switch is
Off, the caution indicator will be dis-
played on the instrument cluster.
Always place the fuse switch in the
ON position while driving the vehicle.
If the switch is located in the “OFF”
position, a caution indicator will be
displayed in the cluster.

OCK077033

OCK077034

Maintenance

58

7

✽

✽

NOTICE

• Set all switches to ON before driv-

ing.

• If the vehicle is going to be unused

for over 1 month, set all switches
to OFF to prevent the batteries
from draining.

Engine compartment fuse
replacement

1. Turn the ignition switch and all

other switches off.

2. Remove the fuse panel cover by

pressing the tab and pulling the
cover up. When the blade type
fuse is disconnected, remove it by
using the clip designed for chang-
ing fuses located in the engine
compartment fuse box. Upon
removal, securely insert reserve
fuse of the same rating.

3. Check the removed fuse; replace it

if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.

4. Push in a new fuse of the same

rating, and make sure it fits tightly
in the clips. If it fits loosely, consult
an authorized Kia dealer.

CAUTION

Always securely install the fuse
panel cover in the engine com-
partment to protect against
electrical failure which may
occur from water contact.
Listen for the audible clicking
sound to ensure fuse panel
cover is securely fastened.

CAUTION -

Fuse Panel
Covers

The contact points of the
switches may wear out with
excessive use. Please refrain
from excessive use of the
switches (except for long-term
parking for over 1 month).

OCK077035

7 59

Maintenance

Multi fuse

If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery

cable.

3. Remove the nuts shown in the pic-

ture above.

4. Replace the fuse with a new one

of the same rating.

5. Reverse these steps to reinstall

the multi fuse.

✽

✽

NOTICE

Do not disassemble nor assemble the
multi fuse when it is secured with
nuts and bolts. Incorrect or partial
assembly torque may cause a fire.
Have the vehicle checked by an
authorized Kia dealer.

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery

cable.

3. Remove the nuts shown in the pic-

ture above.

4. Replace the fuse with a new one

of the same rating.

5. Reverse these steps to reinstall

the main fuse.

OCK077037

OCK077036

Maintenance

60

7

✽

✽

NOTICE

The electronic system may not func-
tion correctly even when the engine
compartment and internal fuse
box’s individual fuses are not dis-
connected. In such case the cause of
the problem may be disconnection
of the main fuse.
Since the main fuse is designed more
intricately than other parts, have the
vehicle checked by an authorized
Kia dealer.

Fuse/relay panel description

■

Engine compartment fuse panel

■

Driver’s side fuse panel

OCK077040

■

Battery box fuse panel

■

Rear fuse box panel

OCK077043

OCK077045

OCK077038

Inside the fuse/relay panel covers, you can find the fuse/relay label
describing fuse/relay name and capacity.

7 61

Maintenance

✽

✽

NOTICE

Not all fuse panel descriptions in
this manual may be applicable to
your vehicle. It is accurate at the
time of printing. When you inspect
the fuse panel in your vehicle, refer
to the fuse panel label.

Maintenance

62

7

Driver’s side fuse panel

OCK077093L

7 63

Maintenance

Fuse Name

Fuse rating

Circuit Protected

MULTI MEDIA 1

25A

Low DC-DC Converter (Audio)

AIR BAG

15A

SRS (Supplemental Restraint System) Control Module

INTERIOR LAMP

10A

Overhead Console Lamp, Center Room Lamp, Room Lamp, Vanity Lamp Switch Left Handle side/Right
Handle side, Luggage Lamp Left Handle side/Right Handle side, Glove Box Lamp, Driver/Passenger Door
Mood Lamp, Driver/Passenger Door Lamp, Driver/Passenger Foot Lamp

STOP LAMP

10A

IBU, Stop Lamp Switch

CLUSTER

10A

Instrument Cluster, Head-Up Display

E-SHIFTER 2

10A

Electronic Auto Transmission Shift Lever (IG1)

IBU 4

10A

IBU (IG1)

MULTI MEDIA 3

10A

Instrument Cluster, Head-Up Display, Air Conditioner Switch

MULTI MEDIA 2

15A

Audio

MEMORY 1

10A

Air Conditioner Control Module, Air Conditioner Switch, Security Indicator, Head-Up Display

IBU 3

10A

IBU (B+)

Instrument panel (Driver’s side fuse panel)

Maintenance

64

7

Fuse Name

Fuse rating

Circuit Protected

E-SHIFTER 1

10A

Electronic Auto Transmission Shift Lever (B+)

A/BAG IND.

10A

Instrument Cluster, Passenger Air Bag IND.

IBU 1

15A

IBU (B+)

DAU

10A

Driver Door Module, Driver/Passenger Power Outside Mirror

MODULE 2

10A

IBU (IG2)

MODULE 3

10A

Auto Transmission Shift Lever Switch, Driver Door Module, Stop Lamp Switch

DOOR LOCK

20A

Door Lock Relay, Door Unlock Relay, Two Turn Unlock Relay

S/HEATER
DRV/PASS

25A

Front Air Ventilation Seat Control Module, Front Seat Warmer Control Module

TAIL GATE

10A

Tail Gate Lid Relay, Fuel Lid Relay, Crash Pad Switch

IBU 2

10A

Rain Sensor

POWER OUTLET 1

20A

Front Power Outlet #2