Acura TL (2014 year). Instruction — part 18
Connect the USB flash memory
device to the USB adapter cable
correctly and securely.
When the USB flash memory device
is connected, the USB indicator is
shown in the display.
Each time you press the TITLE
button, the display mode shows you
in sequence, the folder name, the file
name, the artist name, the album
name, the song name, or name off
(which turns off the text display).
Pull out the USB connector from
the holder.
The display shows up to 16
characters (including spaces) of the
selected data. If the text data has
more than 16 characters, you will see
the first 16 characters and the
indicator in the display. Press
and hold the TITLE button until the
next 16 characters are shown.
1.
2.
CONTINUED
Connecting a USB Flash Memory
Device
Text Data Display Function
Playing a USB Flash Memory Device (Models without navigation system)
Fe
a
tu
re
s
275
USB ADAPTER CABLE
USB ADAPTER CABLE
USB CONNECTOR
12/07/20 11:04:45 31TK4640_280
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
+
−
Use the SKIP bar while a USB flash
memory device is playing to select
passages and change files.
Each time you press and
release the
side of the SKIP bar,
the system skips forward to the
beginning of the next file. Press and
release the
side of the bar to
skip backward to the beginning of
the current file. Press it again to skip
to the beginning of the previous file.
To move rapidly within a file, press
and hold either side (
or
)
of the SKIP bar.
Turning the selector knob to the
right or the left also changes the file.
You can also select a folder or file
from the list by using the selector
knob. Push the selector knob
(ENTER) to switch the display to the
folder list, then turn the selector
knob to select a folder. Press
ENTER to change the display to the
file list, then turn the same knob to
select a file. Press ENTER to set
your selection.
To select a
different folder, press and release
either side of the CATEGORY bar.
Press the
side to skip to the next
folder, and press the
side to skip
to the beginning of the previous
folder.
To Change or Select Files
To Select a File f rom Folder and File
Lists
SKIP
Folder Selection
Playing a USB Flash Memory Device (Models without navigation system)
276
Folder Selection
Track Selection
Press ENTER.
12/07/20 11:04:53 31TK4640_281
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Turn the selector knob to select an
appropriate repeat, random or scan
mode, then press the selector knob
(ENTER) to set your selection.
Pressing the RETURN button goes
back to the previous display and
pressing the SETUP button cancels
this setting mode.
You can select any type of repeat,
random and scan modes by using the
SETUP button and the selector knob.
Push the SETUP button to display
the menu items, then turn the
selector knob to select ‘‘PLAY
MODE.’’ Press the selector knob
(ENTER) to set the selection.
To cancel the selected mode, press
the SETUP button and turn the
selector knob to show ‘‘PLAY
MODE,’’ then press ENTER. When
you see ‘‘NORMAL PLAY,’’ press
ENTER again.
CONTINUED
To Select Repeat, Random or Scan
Mode:
Playing a USB Flash Memory Device (Models without navigation system)
Fe
a
tu
re
s
277
MENU ITEMS
12/07/20 11:05:01 31TK4640_282
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
−
−
−
This
feature continuously plays a file.
Select normal play to turn it off.
Pressing either side of the SKIP bar
also turns off this feature.
This function
samples all files in the selected
folder in the order they are stored.
To activate the scan feature, press
and release the SCAN button. You
will see SCAN in the display. You will
get a 10 second sampling of each file
in the folder. Press and hold the
SCAN button to get out of the scan
mode and play the last file sampled.
You can also select the scan feature
from the menu items with the
selector knob (see page
).
This feature
replays all the files on the selected
folder in the order they are stored.
Select normal play to turn it off.
Pressing either side of the
CATEGORY bar also turns off this
feature.
This feature
plays the files in the selected folder
in random order. You will see
F-RANDOM in the display. Select
normal play to turn it off.
This feature
plays all the files in random order.
You will see RANDOM in the display.
Select normal play to turn it off.
277
REPEAT ONE TRK
SCAN TRK
REPEAT ONE FLD
RANDOM IN FLD
RANDOM IN DISC
Playing a USB Flash Memory Device (Models without navigation system)
278
PLAY MODE ITEMS
12/07/20 11:05:09 31TK4640_283
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
If you see an error message in the
display, see page
.
Select normal play to turn either
scan feature off. Pressing either side
of the CATEGORY or SKIP bar also
turns off the feature.
This function
samples the first file in each folder in
the order they are stored. To
activate the folder scan feature,
press and release the SCAN button
repeatedly. You will see F-SCAN in
the display. You will get a 10 second
sampling of the first file in each
folder. Press and hold the SCAN
button to get out of the folder scan
mode and play the last file sampled.
You can also select the folder scan
feature from the menu items with
the selector knob (see page
).
To change modes, press the AM/
FM or
button. Press the CD
button to switch to the disc mode (if
a disc is loaded). Press the AUX
button to switch the audio mode
between the USB or
Audio.
You can disconnect the USB flash
memory device at any time even if
the USB mode is selected on the
audio system. Make sure to follow
the USB flash memory device’s
instructions when you remove it.
If you reconnect the same USB flash
memory device, the system will
begin playing where it left off.
You can also press the MODE
button on the steering wheel to
change modes.
277
280
Bluetooth
USB Flash Memory Device Error
Messages
To Stop Playing a USB Flash
Memory Device
SCAN FLD
Playing a USB Flash Memory Device (Models without navigation system)
Disconnecting a USB Flash Memory
Device
Fe
a
tu
re
s
279
12/07/20 11:05:18 31TK4640_284
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If you see an error message on the
audio display while playing a USB
flash memory device, find the
solution in the chart to the right. If
you cannot clear the error message,
take your vehicle to your dealer.
Cause
Error Message
Solution
USB ROM Error
Appears when an
incompatible device is
connected.
Use of unsupported
files
No files in USB flash
memory device
Use of unsupported
USB flash memory
device
There is a problem with the USB adapter unit.
Disconnect the device. Then, turn the audio
system off, and turn it on again. Do not
reconnect the device that caused the error.
Appears when the files in the USB flash
memory device are DRM or an unsupported
format. This error message appears for about 3
seconds, then plays the next song.
Appears when the USB flash memory device is
empty or there are no MP3, WMA, or AAC files
in the USB flash memory device. Save some
MP3, WMA, or AAC files in the USB flash
memory device.
Appears when an unsupported device is
connected. See page 273 for the specification
information for the USB flash memory device.
If it appears when the supported device is
connected, reconnect the device.
USB Flash Memory Device Error Messages (Models without navigation system)
280
USB ERROR
BAD USB
DEVICE
PLEASE CHECK
OWNERS
MANUAL
UNPLAYABLE FILE
USB NO SONG
UNSUPPORTED
12/07/20 11:05:22 31TK4640_285
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CONTINUED
Bluetooth
Audio System (Models without navigation system)
Fe
a
tu
re
s
281
SKIP BAR
SELECTOR KNOB
TITLE BUTTON
AUX BUTTON
SETUP BUTTON
VOL/
(VOLUME/POWER) KNOB
12/07/20 11:05:27 31TK4640_286
-------------------------------------------------------------------------------------------------------------------------------------------------------------
*
*
Your vehicle is equipped with a
Audio system, which
allows you to listen to streaming
audio from your
Audio
compatible phone. This function is
only available on phones that are
paired and linked to the vehicle’s
HandsFreeLink (HFL)
system (see page
).
Make sure that your phone is paired
and linked to HFL.
Press the AUX button with the
ignition switch in the ACCESSORY
(I) or ON (II) position. The audio
display shows the
Audio
message and mark. Until the phone
is recognized, you will see ‘‘NO
CONNECT’’ on the display. This
message will go off when the phone
is recognized, then the system
begins to play.
If more than one phone is paired to
the HFL system, there will be a
delay before the system begins to
play.
After a device is linked, press the
TITLE button to confirm the device
name. The name of the device will
appear on the audio display.
In some states, provinces,
and territories, it may be illegal to
perform some data device functions
while driving.
If an iPod, USB flash memory
device, or audio unit connected
to the auxiliary input jack was
selected at the last mode, you
will see iPod, USB, or AUX in
the audio display. Push the AUX
button again to play audio files
from your
Audio
phone.
To begin to play the audio files, you
may need to operate your phone. If
so, follow the phone maker’s
operating instructions.
Not all Bluetooth-enabled phones
with streaming audio capabilities are
compatible with the system. You can
find an approved phone by visiting
, or by
calling the HandsFreeLink
consumer support at 1-888-528-7876.
In Canada, visit
,
or call (888) 528-7876.
:
412
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Bluetooth
www.acura.com/handsfreelink
www.handsfreelink.ca
To Play
Audio Files
Bluetooth
Bluetooth
Audio System (Models without navigation system)
282
NOTE:
12/07/20 11:05:36 31TK4640_287
-------------------------------------------------------------------------------------------------------------------------------------------------------------
In the following conditions, the
display shows ‘‘NO CONNECT’’
message.
The phone is not linked to HFL.
The phone is not turned on.
The phone is not in the vehicle.
Another HFL compatible phone,
which is not compatible for
Audio, is already
connected.
Press the
side of the SKIP bar
to skip forward to the next file, and
press the
side to skip backward
to the beginning of the current file.
Push the
side again to skip to
the previous file.
Turning the selector knob to the
right or left also changes a file.
The resume/pause mode can stop
playing a file temporarily. Press the
SETUP button to display the audio
settings.
Turn the selector to select
RESUME/PAUSE mode, then press
ENTER to set your selection. Repeat
to resume play.
The pause function may not
be available on some phone devices.
Press the SETUP button to display
the audio settings. Turn the selector
to select a desired sound mode, then
press ENTER to set your selection.
Turn the selector to your liking (see
page
for more sound setting
information).
The skip function may not be
available on some phone devices.
243
Bluetooth
CONTINUED
To skip a f ile
To pause or resume a f ile
To change sound settings
Bluetooth
Audio System (Models without navigation system)
Fe
a
tu
re
s
283
NOTE:
NOTE:
12/07/20 11:05:50 31TK4640_288
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If you receive a call when the
Audio is playing, press the
HFL Talk button on the steering
wheel. The display switches to the
HFL mode (see page
).
After ending the call, press the HFL
Back button to go back to the
Audio mode.
If you receive a call while the system
is in the pause mode, the mode will
be canceled and
Audio
will continue to play.
Select any other audio mode by
pressing a button: AM/FM,
or CD (if a disc is loaded),
on the audio control panel, or press
the mode button on the steering
wheel to select another audio mode.
If an iPod or USB flash memory
device is connected to the USB
adapter cable, or audio unit is
connected to AUX jack, pressing the
AUX button also changes the mode.
Switching to another mode pauses
the music playing from your phone.
This device complies with the
appropriate requirements or the
required standards. See page
for
more information.
628
407
Bluetooth
Bluetooth
Bluetooth
Bluetooth
Audio System (Models without navigation system)
To switch to HFL mode
To turn of f the Bluetooth Audio
mode
284
12/08/03 20:58:31 31TK4640_289
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Most audio system functions can still
be controlled by standard buttons,
dials, and knobs, but some functions
can only be accessed using the
interface dial. The interface dial has
two parts, a dial and a selector.
The dial turns left and right. Use it to
make selections or adjustments to a
list or menu on the screen.
The selector can be pushed left,
right, up, down, and in. Use the
selector to scroll through lists, to
select menus, and to highlight menu
items. When you make a selection,
press ENTER to go to that selection.
The audio system can also be
operated by voice control. See the
navigation system instruction for
complete details.
When you unlock the doors with
your remote and turn the audio
system on, the driver’s ID (Driver 1
or Driver 2) is detected, and the
radio presets and sound level
settings (see page
) are turned to
the respective memorized mode
automatically.
296
Interf ace Dial
Voice Control System
Personalization Setting
Audio System (Models with navigation system)
Fe
a
tu
re
s
285
SELECTOR
ENTER
DIAL
12/07/20 11:06:05 31TK4640_290
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Playing the AM/FM Radio (Models with navigation system)
286
INTERFACE DIAL
(SOUND) BUTTON
AM/FM BUTTON
PRESET BUTTONS
CATEGORY BAR
TUNE BAR
AUDIO BUTTON
NAVIGATION SCREEN
VOL/
(VOLUME/POWER) KNOB
SKIP BAR
CENTER DISPLAY
SCAN/A.SEL
(SCAN/AUTO SELECT) BAR
TITLE BUTTON
12/07/20 11:06:11 31TK4640_291
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The power mode must be in
ACCESSORY or ON. Press the
AUDIO button to view the audio
control display. Turn the system on
by pressing the VOL/
knob or
the AM/FM button. Adjust the
volume by turning the
VOL/
knob.
Your vehicle has the engine start/
stop button instead of an ignition
switch. For more information on how
to select the power mode, see page
.
You can use any of five methods to
find radio stations on the selected
band: tune, skip (seek), scan, the
preset buttons, and auto select.
On the FM band, you can also use
the features provided by the radio
data system (RDS). For more
information on the RDS, see page
.
On the AM band, AM noise
reduction turns on automatically.
The band and frequency that the
radio was last tuned to are shown on
the display. To change bands, press
the AM/FM button. You can also
change bands by pushing the
interface selector up. Each time you
push it up, the band will change to
FM1, FM2 or AM. On the FM bands,
STEREO will be shown on the
navigation screen and ST on the
center display, if the station is
broadcasting in stereo. Stereo
reproduction on AM is not available.
184
290
CONTINUED
To Play the AM/FM Radio
To Select a Station
Playing the AM/FM Radio (Models with navigation system)
Fe
a
tu
re
s
287
BAND
STEREO INDICATOR
12/07/20 11:06:21 31TK4640_292
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
−
Use the TUNE bar to tune
the radio to a desired frequency.
Press the
side of the bar to tune
to a higher frequency, or the
side to tune to a lower
frequency. To tune with the
interface dial, push the interface
selector down, and turn the interface
dial to select Tune. Then press
ENTER on the interface selector,
and turn the interface dial to the
desired frequency. To exit the
TUNE mode, press ENTER on the
interface selector, then push the
interface selector up to go back.
The skip (seek)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (
or
) of the SKIP bar, then release
it.
The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN A.SEL bar, then release it.
To scan with the interface dial, push
the interface selector down, and turn
the interface dial to select Scan, then
press ENTER on the interface
selector.
Playing the AM/FM Radio (Models with navigation system)
TUNE
SKIP (SEEK)
SCAN
288
TUNE
SCAN
12/07/20 11:06:28 31TK4640_293
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
When the system finds a strong
signal, it will stop and play that
station for about 10 seconds. If you
do nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the SCAN side of the bar again.
Press the preset button, and hold
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Each preset button or
preset icon can store one frequency
on AM and two frequencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
1.
2.
3.
4.
CONTINUED
To store a preset memory location:
Playing the AM/FM Radio (Models with navigation system)
AUTO SELECT
Preset
Fe
a
tu
re
s
289
A.SEL INDICATOR
A.SEL
12/07/20 11:06:37 31TK4640_294
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Push the interface selector down to
display the AUDIO MENU. Turn the
interface dial to select A.SEL, then
press ENTER on the interface
selector. Turn the interface dial to
select ON, then press ENTER on the
interface selector. You will see
A.SEL on the center display and the
audio control display (if selected),
and the system goes into auto select
mode for several seconds.
You can also press the A.SEL side of
the SCAN/A.SEL bar. You will see
A.SEL on the center display or the
screen, and the system goes into
auto select mode for several seconds.
You will see ‘‘0’’ displayed if auto
select cannot find a strong station for
every preset button (icon).
The system stores the frequencies of
six AM and twelve FM stations in
the preset buttons (icons).
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons (icons) as previously
described.
select A.Sel on
the audio menu again and turn the
interface dial to select A.SEL OFF,
or press the A.SEL side of the bar
again. This restores the presets you
originally set.
For information on AM/FM radio
frequencies and reception, see page
.
On the FM band, you can select a
favorite station and display the
program service name provided by
the radio data system (RDS).
The RDS INFO display function
shows the name of the station you
are listening to. With the audio
system on and the FM band selected,
you can turn this function on or off.
385
To cancel auto select,
Playing the AM/FM Radio (Models with navigation system)
Radio Data System (RDS)
RDS INFO Display
290
12/07/20 11:06:45 31TK4640_295
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст