Chrysler Pacifica (2019 year). Instruction — part 4

To reinstall the seat, align the seat into the detent positions
on the floor. Tilt seat rearward to lock the seat back into its
original position.

WARNING!

If not properly latched, the seat could become loose.
Personal injuries could result.

Fold-Flat — Quad Seats

To fold the seat, lift the recliner lever to the full upward
position and push the seatback forward until it rests on the
seat cushion.

In Floor Detent Guides

Fold-Flat Seat Recline Lever

3

GETTING TO KNOW YOUR VEHICLE

57

NOTE:
• The seatback may lock into the fold flat position. Use the

recline lever to unlock the seatback.

• When returning the seat to the original position, the

headrest must be folded back to the original position.

Easy Entry

Easy Tilt Seat — With Or Without Child Seat Installed

The second row seats can be tilted forward for easy entry
into the third row with or without a child seat installed.

1. Located in the seatback of the second row seat is a

handle that provides easier access to the third row by
tilting the seat forward.

Fold Headrest To Upward Position

Easy Tilt Seat Handle

58

GETTING TO KNOW YOUR VEHICLE

2. To put the seat back into original position, just pull back

on the seatback and lock the seat into position.

WARNING!

Do not use this feature with a child in seat. Serious
injury or death my occur.

Easy Entry — With The Seat Folded Flat

The seats can be folded and tilted for more accessibility for
passengers to enter and exit the third row.

1. Without a child seat installed, you can fold the seat by

pulling the recliner handle on the bottom part of the
seat. Before pulling the recliner lever, make sure the arm
rests are folded up.

Seat Folded Forward With Child Seat Installed

Recliner Lever

3

GETTING TO KNOW YOUR VEHICLE

59

Pull the strap on the back of the seat and the seat will tilt
forward.

2. To put it back into position, pull back on the folded seat

and make sure that it locks into position. Then, pull the
seatback toward the back and fold down the arm rests.

Exit For Third Row Passengers

For passengers seated in the third row, there is a pull strap
located on the outboard side of the seat near the bottom of
the seat back. Third row passengers can pull on the strap
and push the seat forward for folding the seatback down
and tilting the seat to the floor.

NOTE:

This process is for when there is no child seat

installed. Use the easy entry lever if a child seat is installed.

Pull Strap

Pull Strap For Third Row Passengers

60

GETTING TO KNOW YOUR VEHICLE

Instructionly Folding Third Row Seats — If Equipped

1. Lower the center head restraint down to the seatback by

pushing the button on the guide and pushing the head
restraint down.

2. Pull release strap marked “1” to release the anchors.

3. Pull release strap marked “2” and tumble the seat

rearward into the storage bin.

Release Strap “1”

Strap “2”

3

GETTING TO KNOW YOUR VEHICLE

61

To Unfold Third Row Seats

1. Pull up on the assist strap to lift the seat out of the

storage bin and push the seat forward until the anchors
latch.

Stowed Third Row Seat

Assist Straps

62

GETTING TO KNOW YOUR VEHICLE

2. Pulling strap “2” releases the seatback to return to its

full upright position.

3. Raise the head restraint to its upright position.

WARNING!

• In a collision, you or others in your vehicle could be

injured if seats are not properly latched to their floor
attachments. Always be sure the seats are fully
latched.

(Continued)

WARNING! (Continued)

• Sitting in a seat with the head restraint in its lowered

position could result in serious injury or death in a
collision. Always make sure the head restraints are in
their upright positions when the seat is to be occu-
pied.

Stow ’n Go Seating

On vehicles equipped with Stow ’n Go seating, the second
and third row seats can be folded into the floor for
convenient storage.

Auto Advance ‘n Return — If Equipped

On vehicles equipped with the Auto Advance ‘n Return
feature, the front seat will move forward automatically to a
location that will allow the second row Stow ‘n Go seat
movement, without interference by the front seat. After the
second row seat is stowed, the front seat will move back to
the previous location once the Auto Advance ‘n Return
button is pushed again.

The Auto Advance ‘n Return feature is available to both the
front driver and passenger power seats, if equipped.

Strap “2”

3

GETTING TO KNOW YOUR VEHICLE

63

WARNING!

During power seat operation, personal injury or cargo
damage may occur. Ensure the front seat is not occu-
pied and the seat travel path is clear.

A one-touch Auto Advance ‘n Return button is located on
the B-pillar trim panel, just in front of the power sliding
door.

Using the Auto Advance ‘n Return Feature

NOTE:
• The button is only functional when the power sliding

door is open and the vehicle is in PARK. If the door is
not open or the vehicle is not in PARK when the button
is pushed, the front seat will not move and a message
will be displayed in instrument cluster display.

• If the power sliding door is closing when the button is

pushed, the front seat will not move and a message will
be displayed in the instrument cluster display.

1. Push and release the Auto Advance ‘n Return button.

The front seat cushion and seat back will move as
necessary to a location that will allow space for the
second row Stow ‘n Go seat movement.

2. Perform the second row Stow ‘n Go seat movement.

Refer to “Second Row Stow ‘n Go” for further informa-
tion.

3. Push and release the Auto Advance ‘n Return button a

second time. The front seat cushion and seat back will
return to the original starting location.

Auto Advance ‘n Return Button

64

GETTING TO KNOW YOUR VEHICLE

NOTE:
• To abort seat operation while seat is in motion, push the

Auto Advance ‘n Return button, or push the front power
seat button to stop the seat movement. Pushing the Auto
Advance ‘n Return button again will return the front
seat to the original starting location.

• The Auto Advance ‘n Return system includes obstacle

detection. When the system detects an obstacle, the seat
will stop, reverse direction, and return to the previous
location. A message will be displayed in the instrument
cluster indicating that an obstacle has been detected.

• If the front seat is already in a location that will allow

space for Stow ‘n Go of the second row seat, the front
seat will not move and a message will be displayed in
the instrument cluster.

• If calibration of the front seat is lost, the seat will

automatically re-calibrate when the Auto Advance ‘n
Return button is pushed. This may result in the seat
cushion moving forward and downward, before moving
to the location that will allow space for the second row
Stow ‘n Go seat movement.

Second Row Stow ’n Go

For Instruction Seats:

To stow the seat in the floor, move the

front seat all the way forward using the instruction seat
adjustment bar. Move the seat back all the way forward
using the recliner handle located on the outboard side of
the cushion. Move the seat height to at least mid position
using the height adjuster handle in the outboard side of the
cushion.

For Power Seats:

Push the Auto Advance ‘n Return button

located on the B pillar trim (if equipped.) Refer to

⬙Auto

Advance ‘n Return - If Equipped

⬙ in this section for

instructions.

1. To access the storage bin, place the lock rod in the locked

position.

3

GETTING TO KNOW YOUR VEHICLE

65

NOTE:

• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.
• For information on storage bin function with the seats

rearward refer to “Second Row Floor Storage Bins” in
“Internal Equipment” for further information.

2. Pull the latch located near the second row seat to open

the floor panel.

Lock Rod

Floor Latch

66

GETTING TO KNOW YOUR VEHICLE

3. Pull the floor panel and position it toward the front seats

while folding the top half down and rest it against the
front seats.

4. Fold the armrest upward and stow the seat by grabbing

the strap on the lower part of the seat back, and guide
the seat into the tub.

Push Panel Forward

Pull Strap

3

GETTING TO KNOW YOUR VEHICLE

67

5. Push down on the seat back to lock the seat in the tub.

6. Close the floor by pulling the floor panel backwards by

the bottom corner edge of the panel.

Push To Lock

Extend Floor Panel

68

GETTING TO KNOW YOUR VEHICLE

7. Push down on floor panel to lock into place.

8. Readjust the front seat as needed.

WARNING!

In a collision, serious injury could result if the seat
storage bin covers are not properly latched:
• Do not drive the vehicle with the storage bin covers

open.

• Keep the storage bin covers closed and latched while

the vehicle is in motion.

• Do not use a storage bin latch as a tie down.

CAUTION!

• The storage bin cover must be locked and flat to

avoid damage from contact with the front seat tracks,
which have minimal clearance to the cover.

• Do not sit on the second row seat when it is in the

stowed position with the seatback upright otherwise
damage to the seat may occur.

To Unstow Second Row Seats

For Instruction Seats:

To unstow the seat from the floor, move

the front seat all the way forward using the instruction seat
adjustment bar.

For Power Seats:

Push the Auto Advance ‘n Return button

located on the B pillar trim (if equipped). Refer to

⬙Auto

Advance ‘n Return - If Equipped

⬙ in this section for

instructions.

1. To access the storage bin, place the lock rod in the locked

position.

Push To Lock

3

GETTING TO KNOW YOUR VEHICLE

69

NOTE:

• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.

2. Pull the latch located near the second row seat to open

the floor panel.

Lock Rod

Floor Latch

70

GETTING TO KNOW YOUR VEHICLE

3. Pull the floor panel and position it toward the front seats

while folding the top half down and rest it against the
front seats.

4. Pull the strap located on the seat and pull the seat out of

the storage bin. Push the seat rearward making sure that
it locks into the floor. Fold the seatback into the upright
position and pull the headrest up.

NOTE:

The seatback may be locked, if it is, it will be

necessary to use the recliner handle to unlock the back
before folding into the upright position.

Push Panel Forward

Pull Strap

3

GETTING TO KNOW YOUR VEHICLE

71

5. To position the floor panel back into its original state,

grab the bottom corner and extend it outward.

6. Lay the floor panel flat and push down until it clicks

into position. Replace the floor mat as needed.

7. Readjust the front seat as needed.

WARNING!

• In a collision, you or others in your vehicle could be

injured if seats are not properly latched to their floor
attachments. Always be sure the seats are fully
latched.

(Continued)

Extend Panel

Push Down To Lock

72

GETTING TO KNOW YOUR VEHICLE