RAM 1500 (2019 year). Instruction — part 37
Setting Name
Selectable Options
Auto Entry/Exit Suspension
On
Off
NOTE:
When the “Auto Entry/Exit Suspension” feature is selected, the vehicle automatically lowers from ride height posi-
tion when vehicle shifted to park for easy entry/exit.
Display Suspension Messages
All
Warning Only
Automatic Aero Mode
On
Off
NOTE:
When the “Automatic Aero Mode” feature is selected, the Ride Height will automatically be adjusted depending on
the vehicle speed.
Tire Jack Mode
On
Off
NOTE:
When this feature is selected the air suspension system is disabled to prevent auto leveling of the suspension, while
the vehicle is on a jack changing a tire.
Transport Mode
On
Off
NOTE:
When the “Transport Mode” feature is selected, the air suspension system is disabled to assist with flat bed towing.
584
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Wheel Alignment Mode
On
Off
NOTE:
The “Wheel Alignment Mode” feature prevents auto leveling of the air suspension while performing a wheel align-
ment service. Before performing a wheel alignment, this mode must be enabled. Refer to an authorized dealer for fur-
ther information.
Trailer Brake
After pressing the “Trailer Brake” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Trailer Select
Trailer 1
Trailer 2
Trailer 3
Trailer 4
Trailer Brake Type
Light Electric
Heavy Electric
Light EOH
Heavy EOH
Trailer Name
List of Trailer Names Available
NOTE:
You can select and personalize your trailer name depending on the type of trailer you are hauling. Select the trailer
name from the following list: trailer, boat, car, cargo, dump, equipment, flatbed, gooseneck, horse, livestock, motor-
cycle, snow mobile, travel, utility, and 5th wheel.
10
MULTIMEDIA
585
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Audio
After pressing the “Audio” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Balance/Fade
Front
Back
Left
Right
NOTE:
The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon or
use the arrows to adjust, tap the “C” icon to readjust to the center.
Equalizer
+
–
NOTE:
When in the “Equalizer” display you may adjust the Bass, Mid and Treble settings.
Speed Adjusted Vol-
ume
Off
1
2
3
NOTE:
The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed.
586
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Surround Sound —
If Equipped
On
Off
NOTE:
The “Surround Sound” feature provides simulated surround sound mode.
AUX Volume Offset
— If Equipped
On
Off
NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through
the AUX input.
Loudness — If
Equipped
On
Off
NOTE:
The “Loudness” feature improves sound quality at lower volumes.
10
MULTIMEDIA
587
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Compass Settings — If Equipped
After pressing the “Compass Settings” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Variance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE:
• Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differ-
ences the variance should be set for the zone where the vehicle is driven, per the zone map. Once properly set, the
compass will automatically compensate for the differences, and provide the most accurate compass heading.
• Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Laptops and
Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sen-
sor, and it may give false readings.
Perform Compass Calibra-
tion
On
Off
NOTE:
Press the “Calibration” button on the touchscreen to change this setting. This compass is self-calibrating,
which eliminates the need to instructionly reset the compass. When the vehicle is new, the compass may appear erratic
until it is calibrated. You may also calibrate the compass by pressing the “ON” button on the touchscreen and com-
pleting one or more 360-degree turns (in an area free from large metal or metallic objects). The compass will now
function normally.
588
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Compass Variance Zone Map
10
MULTIMEDIA
589
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Phone/Bluetooth
After pressing the “Phone/Bluetooth” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Paired Phones
List of Paired Phones
NOTE:
The “Paired Phones” feature shows which phones are paired to the Phone/Bluetooth system. For further information,
refer to the Uconnect Owner’s Instruction Supplement.
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Tune Start
On
Off
Channel Skip
List of Channels
NOTE:
SiriusXM can be programmed to exclude undesirable channels while scanning. To make your selection, press the
“Channel Skip” button on the touchscreen, select the channels you would like to skip.
590
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Subscription Info
Sirius ID
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the SIRIUS ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
Restore Settings
After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Restore Settings
Yes
Cancel
NOTE:
When the “Restore Settings” feature is selected it will reset the Display, Clock, Audio, and Radio Settings to their de-
fault settings. If “Yes” is selected a pop-up will appear asking
⬙Are you sure you want to reset your settings to de-
fault?” select “Yes” to restore, or “Cancel” to exit.
10
MULTIMEDIA
591
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Clear Personal Data
After pressing the “Clear Personal Data Settings” button on
the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Clear Personal Data
Yes
Cancel
NOTE:
When this feature is selected it will remove all personal data including Bluetooth devices and presets. If “Yes” is se-
lected a pop-up will appear asking
⬙Are you sure you want to clear all personal data?” select “Yes” to Clear, or “Can-
cel” to exit.
System Information
After pressing the “System Information” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
System Information
System Software Information Screen
NOTE:
When the “System Information” feature is selected, a “System Software Information” screen will appear, displaying
the system software version. You can also update your maps with a USB device. Please see an authorized dealer for
further information.
592
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Uconnect 4/4C/4C NAV Settings
Press the “Apps” button on the touchscreen then press the
“Settings” button on the touchscreen to display the settings
menu screen. In this mode the Uconnect system allows you
to access programmable features that may be equipped
such as Display, Voice, Clock, Safety & Driving Assistance,
Lights, Doors & Locks, Auto-On Comfort (if equipped),
Engine Off Options, Suspension, Trailer Brake, Audio,
Phone/Bluetooth, SiriusXM Setup (if equipped), Restore
Settings, Clear Personal Data and System Information.
NOTE:
Only one category may be selected at a time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
press the back arrow button on the touchscreen to return to
the previous menu or press the “X” button on the touch-
screen to close out of the settings screen. Pressing the Up or
Down Arrow buttons on the touchscreen on the right side
of the screen will allow you to toggle up or down through
the list of available settings.
NOTE:
All settings should be changed with the ignition in
the RUN position.
Uconnect 4/4C/4C NAV With 8.4–inch Display Buttons On
The Touchscreen And Buttons On The Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
10
MULTIMEDIA
593
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Language
After pressing the “Language” button on the touchscreen,
the following settings will be available:
Setting Name
Selectable Options
Set Language
English
Français
Español
NOTE:
When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Espa-
ñol) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set
Language” button on the touchscreen, then press the desired language button on the touchscreen until a check-mark
appears next to the language, showing that setting has been selected.
Display
After pressing the “Display” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Display Mode
Auto
Instruction
NOTE:
When Day or Night is selected for the Display Mode, the usage of the Parade Mode feature will cause the radio to
activate the Display Brightness Day control even though the headlights are on.
594
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Display Brightness With Headlights
ON
–
+
NOTE:
To make changes to the
⬙Display Brightness with Headlights ON⬙ setting, the headlights must be on and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Display Brightness With Headlights
OFF
–
+
NOTE:
To make changes to the
⬙Display Brightness with Headlights OFF⬙ setting, the headlights must be off and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Set Theme
Pre-configured Themes
Touchscreen Beep
On
Off
Controls Screen Time-Out — If
Equipped
On
Off
Fuel Saver Display in Cluster — If
Equipped
On
Off
NOTE:
When selected, the system displays fuel saver mode in the instrument cluster.
10
MULTIMEDIA
595
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Setting Name
Selectable Options
Navigation Next Turn Pop-ups Dis-
played In Cluster — If Equipped
On
Off
Phone Pop-ups Displayed in Cluster
— If Equipped
On
Off
Units
After pressing the “Units” button on the touchscreen, you
may select each unit of measure independently displayed
in the instrument cluster display, and navigation system (if
equipped). The following selectable units of measure are
listed below:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
When the “Custom” setting is selected, units will appear according to your personally configured settings. To
configure these settings, press the “Custom” bar. The following settings will appear:
Speed
MPH
km/h
Distance
mi
km
Fuel Consumption
MPG (US)
MPG (UK)
L/100 km
km/L
Pressure
psi
kPa
bar
Temperature
°F
°C
596
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Voice
After pressing the “Voice” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Never
w/Help
Always
Clock
After pressing the “Clock & Date” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Sync Time With GPS — If Equipped
On
Off
Set Time Hours
–
+
Set Time Minutes
–
+
Time Format
12hrs
24hrs
AM
PM
Show Time In Status Bar — If
Equipped
On
Off
NOTE:
The “Show Time In Status Bar” feature allows you to turn on or shut off the digital clock in the status bar.
10
MULTIMEDIA
597
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Camera
After pressing the “Camera” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
ParkView Backup Camera Delay
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.
Active Parkview Backup Camera
Guidelines
On
Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.
Fixed Parkview Backup Camera
Guidelines
On
Off
598
MULTIMEDIA
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Safety & Driving Assistance
After pressing the “Safety & Driving Assistance” button on
the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Forward Collision Warn-
ing — If Equipped
Off
Warning Only
Warning & Braking
NOTE:
Apples brakes to slow the vehicle in case of potential forward collision, or applies brakes and a warning.
Forward Collision Warning
Sensitivity — If Equipped
Near
Med
Far
NOTE:
Sets the distance in which a Forward Collision Warning occurs.
Lane Sense Warning
Early
Med
Late
NOTE:
Sets what distance the steering wheel provides feedback for potential lane departures.
Lane Sense Strength
Low
Med
High
ParkSense
Sound Only
Sound & Display
NOTE:
The Rear Park Assist system scans for objects behind the vehicle when the transmission gear selector is in REVERSE
and the vehicle speed is less than 7 mph (11 km/h).
10
MULTIMEDIA
599
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст