Alfa Romeo 4C (2018 year). Manual — part 58
NOTE:
If the belts retract slowly, inspect the upper
turning loop for soiling. If soiling is present, clean with
a wet soft cloth until all residue is removed.
WARNING!
A frayed or torn belt could rip apart in a collision
and leave you with no protection. Inspect the belt
system periodically, checking for cuts, frays, or
loose parts. Damaged parts must be replaced imme-
diately. Do not disassemble or modify the system.
Seat belt assemblies must be replaced after a colli-
sion if they have been damaged (i.e., bent retractor,
torn webbing, etc.).
Plastic And Coated Parts
Use Mopar Total Clean to clean vinyl upholstery.
CAUTION!
•
Direct contact of air fresheners, insect repellents,
suntan lotions, or hand sanitizers to the plastic,
painted, or decorated surfaces of the interior may
cause permanent damage. Wipe away immediately.
(Continued)
CAUTION!
(Continued)
•
Damage caused by these type of products may not
be covered by your New Vehicle Limited War-
ranty.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet soft cloth. A mild soap solution
may be used, but do not use high alcohol content or
abrasive cleaners. If soap is used, wipe clean with a
clean damp cloth.
2. Dry with a soft cloth.
Leather Parts
Mopar Total Clean is specifically recommended for
leather upholstery.
Your leather upholstery can be best preserved by regu-
lar cleaning with a damp soft cloth. Small particles of
dirt can act as an abrasive and damage the leather
upholstery and should be removed promptly with a
damp cloth. Stubborn soils can be removed easily with
8
SERVICING AND MAINTENANCE
243
a soft cloth and Mopar Total Clean. Care should be
taken to avoid soaking your leather upholstery with
any liquid. Please do not use polishes, oils, cleaning
fluids, solvents, detergents, or ammonia-based cleaners
to
clean
your
leather
upholstery. Application
of
a
leather conditioner is not required to maintain the
original condition.
NOTE:
If equipped with light colored leather, it tends to
show any foreign material, dirt, and fabric dye transfer
more so than darker colors. The leather is designed for
easy cleaning, and FCA recommends Mopar total care
leather cleaner applied on a cloth to clean the leather
seats as needed.
CAUTION!
Do not use Alcohol and Alcohol-based and/or Ke-
tone based cleaning products to clean leather seats,
as damage to the seat may result.
Glass Surfaces
All glass surfaces should be cleaned on a regular basis
with Mopar, or any commercial household-type glass
cleaner. Never use an abrasive type cleaner. Use caution
when cleaning the inside rear window equipped. Do
not use scrapers or other sharp instrument that may
scratch the elements.
Labels can be peeled off after soaking with warm water
(if equipped), keep all objects a safe distance from the
windows.
When cleaning the rear view mirror, spray cleaner on
the towel or cloth that you are using. Do not spray
cleaner directly on the mirror.
244
SERVICING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
CONTENTS
²
VEHICLE IDENTIFICATION NUMBER
. . . . . .
246
²
WHEEL AND TIRE TORQUE
SPECIFICATIONS
. . . . . . . . . . . . . . . . . . . . .
246
▫
Torque Specifications
. . . . . . . . . . . . . . . . . .
246
²
BRAKE SYSTEM
. . . . . . . . . . . . . . . . . . . . . .
248
²
FUEL REQUIREMENTS — 1750 TURBO
. . . . .
248
▫
Reformulated Gasoline
. . . . . . . . . . . . . . . .
248
▫
Materials Added To Fuel
. . . . . . . . . . . . . . .
248
▫
Gasoline/Oxygenate Blends
. . . . . . . . . . . . .
249
▫
E-85 Usage In Non-Flex Fuel Vehicles
. . . . . .
249
▫
CNG And LP Fuel System Modifications
. . . .
250
▫
MMT In Gasoline
. . . . . . . . . . . . . . . . . . . .
250
▫
Fuel System Cautions
. . . . . . . . . . . . . . . . . .
250
▫
Carbon Monoxide Warnings
. . . . . . . . . . . .
251
²
FLUID CAPACITIES
. . . . . . . . . . . . . . . . . . .
252
²
FLUIDS AND LUBRICANTS
. . . . . . . . . . . . .
253
▫
Engine
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
253
▫
Chassis
. . . . . . . . . . . . . . . . . . . . . . . . . . .
254
9
VEHICLE IDENTIFICATION NUMBER
The Vehicle Identification Number (VIN) is found on
the left front corner of the instrument panel, visible
through the windshield. This number also appears
engraved on an Aluminum plate glued and riveted on
the floor crossmember under the passenger seat.
NOTE:
It is illegal to remove or alter the VIN.
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure
that the wheel is properly mounted to the vehicle. Any
time a wheel has been removed and reinstalled on the
vehicle, the lug nuts/bolts should be torqued using a
properly calibrated torque wrench using a high quality
six sided (hex) deep wall socket.
Torque Specifications
Lug Nut/Bolt
Torque
**Lug Nut/
Bolt Size
Lug Nut/Bolt
Socket Size
72 Ft-Lbs (98
N·m)
M12 x 1.25
17 mm
**Use only your authorized dealer recommended lug
nuts/bolts and clean or remove any dirt or oil before
tightening.
Vehicle Identification Number
246
TECHNICAL SPECIFICATIONS
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст