Nissan Pathfinder (2005 year). Instruction — part 101
FRONT DOOR LOCK
BL-95
C
D
E
F
G
H
J
K
L
M
A
B
BL
2005 Pathfinder
4.
While pulling the outside handle, remove door key cylinder
assembly or escutcheon.
5.
While pulling outside handle, slide toward rear of vehicle to
remove outside handle.
6.
Remove the front gasket and rear gasket.
7.
Remove the TORX bolts (T30), remove the door lock assembly.
8.
While pulling outside handle bracket, slide toward rear of vehicle
to remove outside handle bracket and door lock assembly.
PIIA3554E
LIIA0532E
PIIA3557E
Door lock assembly bolts
7.5 N·m (0.77 kg-m, 00 in-lb)
PIIA1090E
PIIA3558E
BL-96
FRONT DOOR LOCK
2005 Pathfinder
9.
Disconnect the door lock actuator connector.
10. Reach in to separate the key cylinder rod and outside handle
cable connection.
INSTALLATION
Installation in the reverse order of removal.
CAUTION:
To install each rod, be sure to rotate the rod holder until a click is felt.
Disassembly and Assembly
EIS0040A
DOOR KEY CYLINDER ASSEMBLY
Remove the key cylinder escutcheon pawl and remove the door key cylinder.
PIIA5059E
PIIA4136E
REAR DOOR LOCK
BL-97
C
D
E
F
G
H
J
K
L
M
A
B
BL
2005 Pathfinder
REAR DOOR LOCK
PFP:82502
Component Structure
EIS0040B
Removal and Installation
EIS0040C
REMOVAL
1.
Remove the rear door window regulator. Refer to
.
2.
Remove door grommets, and remove outside handle nuts from the hole.
3.
Remove outside handle.
4.
Disconnect the outside handle cable connection.
5.
Remove the inside door handle.
6.
Disconnect the door lock and inside door handle cables from the inside door handle.
7.
Disconnect the door lock actuator connector and remove the assembly.
INSTALLATION
Installation is in the reverse order of removal.
1.
Outside door handle
2.
Rear door striker
3.
Rear door lock assembly
4.
Outside door handle cable
5.
Inside door handle cable
6.
Inside door handle assembly
7.
Door lock cable
LIIA1729E
BL-98
BACK DOOR LOCK
2005 Pathfinder
BACK DOOR LOCK
PFP:90504
Component Structure
EIS0040D
1.
Glass hatch latch assembly
2.
Emergency exit handle cable
3.
Back door latch cable
4.
Back door latch
5.
Back door release handle
6.
Back door striker
7.
Glass hatch release handle
8.
emergency exit handle
LIIA1730E
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
BL-99
C
D
E
F
G
H
J
K
L
M
A
B
BL
2005 Pathfinder
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
PFP:28591
Component Parts and Harness Connector Location
EIS0040E
WIIA0443E
BL-100
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
2005 Pathfinder
System Description
EIS0040F
NVIS (Nissan Vehicle Immobilizer System-NATS) has the following immobilizer functions:
●
Since only NVIS (NATS) ignition keys, whose IDs have been registered into the ECM and BCM, allow the
engine to run, operation of a stolen vehicle without a NVIS (NATS) registered key is prevented by NVIS
(NATS).
NVIS (NATS) will immobilize the engine if someone tries to start it without the registered key of NVIS
(NATS).
●
All of the originally supplied ignition key IDs have been NVIS (NATS) registered.
If requested by the vehicle owner, a maximum of five key IDs can be registered into the NVIS (NATS)
components.
●
The security indicator blinks when the ignition switch is in OFF or ACC position. NVIS (NATS) warns out-
siders that the vehicle is equipped with the anti-theft system.
●
When NVIS (NATS) detects trouble, the security indicator lamp lights up while ignition key is in the ON
position.
●
NVIS (NATS) trouble diagnoses, system initialization and additional registration of other NVIS (NATS)
ignition key IDs must be carried out using CONSULT-II hardware and CONSULT-II NVIS (NATS) software.
When NVIS (NATS) initialization has been completed, the ID of the inserted ignition key is automatically
NVIS (NATS) registered. Then, if necessary, additional registration of other NVIS (NATS) ignition key IDs
can be carried out.
Regarding the procedures of NVIS (NATS) initialization and NVIS (NATS) ignition key ID registration, refer
to CONSULT-II Operation Instruction NATS-IVIS/NVIS.
●
When servicing a malfunction of the NVIS (NATS) (indicated by lighting up of Security Indicator
Lamp) or registering another NVIS (NATS) ignition key ID, it may be necessary to re-register origi-
nal key identification. Therefore, be sure to receive ALL KEYS from vehicle owner.
System Composition
EIS0040G
The immobilizer function of the NVIS (NATS) consists of the following:
●
NATS ignition key
●
NATS antenna amp. located in the ignition key cylinder
●
Body control module (BCM)
●
Engine control module (ECM)
●
Security indicator
NOTE:
The communication between ECM and BCM uses the CAN communication system.
PIIA1121E
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
BL-101
C
D
E
F
G
H
J
K
L
M
A
B
BL
2005 Pathfinder
ECM Re-communicating Function
EIS0040H
The following procedure can automatically perform re-communication of ECM and BCM, but only when the
ECM has been replaced with a new one which has never been energized on-board.
(In this step, initialization procedure by CONSULT-II is not necessary)
NOTE:
●
When registering new key IDs or replacing the ECM other than brand new, refer to CONSULT-II
Operation Instruction NATS-IVIS/NVIS.
●
If multiple keys are attached to the key holder, separate them before work.
●
Distinguish keys with unregistered key ID from those with registered ID.
1.
Install ECM.
2.
Using a registered key (*2), turn ignition switch to ON.
*2: To perform this step, use the key (except for card plate key) that has been used before performing
ECM replacement.
3.
Maintain ignition switch in ON position for at least 5 seconds.
4.
Turn ignition switch to OFF.
5.
Start engine.
If engine can be started, procedure is completed.
If engine cannot be started, refer to CONSULT-II Operation Instruction NATS-IVIS/NVIS and initialize control
unit.
BL-102
NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS)
2005 Pathfinder
Wiring Diagram — NATS —
EIS0040I
WIWA0552E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст