Nissan Pathfinder (2005 year). Instruction — part 1
ACC-1
ACCELERATOR CONTROL SYSTEM
B ENGINE
CONTENTS
C
D
E
F
G
H
I
J
K
L
M
SECTION
A
ACC
2005 Pathfinder
ACCELERATOR CONTROL SYSTEM . . . . . .. 2
Components . . . . . . . . . . . . . . . . 2
Removal and Installation . . . . . . . . . . .. 3
SERVICE DATA AND SPECIFICATIONS (SDS) . . 5
Accelerator Control . . . . . . . . . . . . ... 5
ADJUSTABLE AND NON-ADJUSTABLE
ACCELERATOR PEDAL . . . . . . . . . ... 5
ACC-2
ACCELERATOR CONTROL SYSTEM
2005 Pathfinder
ACCELERATOR CONTROL SYSTEM
PFP:18005
Components
EBS00M4J
Adjustable Accelerator Pedal
WBIA0628E
1.
Adjustable accelerator pedal assembly
2.
Adjustable brake pedal cable
3.
Adjustable brake pedal cable lock
tab (part of the cable)
ACCELERATOR CONTROL SYSTEM
ACC-3
C
D
E
F
G
H
I
J
K
L
M
A
ACC
2005 Pathfinder
Non-adjustable Accelerator Pedal
CAUTION:
●
Before removal and installation, the adjustable accelerator and brake pedals must be in the front-
most position, if equipped. This is to align the base position of the accelerator and brake pedals.
●
Do not disassemble the accelerator pedal assembly.
●
Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
●
Do not disassemble the accelerator pedal adjusting mechanism.
●
Avoid damage from dropping the accelerator pedal assembly during handling.
●
Keep the accelerator pedal assembly away from water.
Removal and Installation
EBS00KB3
REMOVAL FOR ADJUSTABLE ACCELERATOR PEDAL
1.
Move the accelerator and brake pedals to the frontmost position.
2.
Turn the ignition switch OFF and disconnect the negative battery terminal.
3.
Disconnect the adjustable pedal electric motor electrical connector.
4.
Disconnect the adjustable pedal electric motor memory electrical connector, if equipped.
5.
Disconnect the accelerator position sensor electrical connector.
a.
Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b.
Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
WBIA0629E
1.
Non-adjustable accelerator pedal assembly
LBIA0333E
ACC-4
ACCELERATOR CONTROL SYSTEM
2005 Pathfinder
6.
Disconnect the adjustable brake pedal cable from the adjustable
accelerator pedal.
●
Release the two lock tabs, then pull the adjustable brake
pedal cable to disconnect it from the adjustable accelerator
pedal.
7.
Remove the two upper and one lower accelerator pedal nuts.
8.
Remove the adjustable accelerator pedal assembly.
CAUTION:
●
Do not disassemble the accelerator pedal assembly.
●
Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
●
Do not disassemble the accelerator pedal adjusting mechanism.
●
Avoid damage from dropping the accelerator pedal assembly during handling.
●
Keep the accelerator pedal assembly away from water.
REMOVAL FOR NON-ADJUSTABLE ACCELERATOR PEDAL
1.
Disconnect the negative battery terminal.
2.
Disconnect the accelerator position sensor electrical connector.
a.
Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b.
Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
3.
Remove the two upper and one lower accelerator pedal nuts.
4.
Remove the accelerator pedal assembly.
CAUTION:
●
Do not disassemble the accelerator pedal assembly.
●
Do not remove the accelerator pedal position sensor
from the accelerator pedal bracket.
●
Avoid damage from dropping the accelerator pedal assembly during handling.
●
Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
INSPECTION AFTER INSTALLATION
●
Check that the accelerator pedal moves smoothly within the
specified range.
●
Check that the accelerator pedal smoothly returns to the original
position.
●
Perform an electrical inspection of the accelerator pedal position
sensor. Refer to
EC-650, "DTC P2138 APP SENSOR"
.
CAUTION:
When the harness connector of the accelerator pedal posi-
tion sensor is disconnected, perform
″
Accelerator Pedal
Released Position Learning
″
. Refer to
EC-88, "Accelerator Pedal Released Position Learning"
.
LFIA0233E
LBIA0333E
Accelerator pedal - total pedal
applied stroke “A”
: 48 mm (1.89 in)
LBIA0434E
SERVICE DATA AND SPECIFICATIONS (SDS)
ACC-5
C
D
E
F
G
H
I
J
K
L
M
A
ACC
2005 Pathfinder
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
Accelerator Control
EBS00KB4
ADJUSTABLE AND NON-ADJUSTABLE ACCELERATOR PEDAL
Unit: mm (in)
Accelerator pedal - total pedal applied stroke “A”
48 (1.89)
LBIA0434E
ACC-6
SERVICE DATA AND SPECIFICATIONS (SDS)
2005 Pathfinder
ACS-1
AUTO CRUISE CONTROL SYSTEM
K ELECTRICAL
CONTENTS
C
D
E
F
G
H
I
J
L
M
SECTION
A
B
ACS
2005 Pathfinder
ASCD
ACS-2
[ASCD]
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
2005 Pathfinder
AUTOMATIC SPEED CONTROL DEVICE (ASCD)
PFP:18930
Description
EKS009X5
Regarding the information for ASCD system, refer to
EC-30, "AUTOMATIC SPEED CONTROL DEVICE
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст