Nissan Pathfinder (2005 year). Instruction — part 137
COMBINATION METERS
DI-13
C
D
E
F
G
H
I
J
L
M
A
B
DI
2005 Pathfinder
Next test requested
BAtXX.X
Estimated present bat-
tery voltage.
Next test requested
rES -X
Seat belt buckle switch
LH status.
1= Buckled
0 = Unbuckled
Next test requested
PA -XX
Hex value port A.
Next test requested
Pb -XX
Hex value port B.
Next test requested
PE -XX
Hex value port E.
Next test requested
PL -XX
Hex value port L.
Next test requested
P6 -XX
Hex value port K.
Next test requested
Pn -XX
Hex value port M.
Next test requested
PP -XX
Hex value port P.
Next test requested
PS -XX
Hex value port S.
Next test requested
Pt -XX
Hex value port T.
Next test requested
Pu -XX
Hex value port U.
Next test requested
P4 -XX
Hex value port V.
Next test requested
Puu -XX
Hex value port W.
Next test requested
A01XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A02XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A03XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A04XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A05XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A06XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A07XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A08XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A09XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A10XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A11XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A12XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A13XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A14XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
A15XXX
A/D port A/D value (non-
ratioed).
0-255
Next test requested
PA0-XX
Hex value representing
state of A/D ports 0-7.
Event
Odometer Display
Description of Test/Data
Notes:
DI-14
COMBINATION METERS
2005 Pathfinder
Next test requested
PA1-XX
Hex value representing
state of A/D ports 0-7.
Next test requested
GAGE
Return to beginning of self-
diagnosis.
Event
Odometer Display
Description of Test/Data
Notes:
COMBINATION METERS
DI-15
C
D
E
F
G
H
I
J
L
M
A
B
DI
2005 Pathfinder
CONSULT-II Function (METER)
EKS00D6H
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II BASIC OPERATION
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be
detected in self-diagnosis depending on control unit which carries out CAN communication.
1.
With the ignition switch OFF, connect CONSULT-II and CON-
SULT-II CONVERTER to the data link connector, then turn igni-
tion switch ON.
2.
Touch "START (NISSAN BASED VHCL)".
3.
Touch "METER" on "SELECT SYSTEM" screen. If "METER" is
not indicated, go to
GI-38, "CONSULT-II Data Link Connector
.
METER diagnosis mode
Description
SELF-DIAG RESULTS
Displays combination meter self-diagnosis results.
DATA MONITOR
Displays combination meter input/output data in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
BBIA0538E
BCIA0029E
BCIA0030E
DI-16
COMBINATION METERS
2005 Pathfinder
4.
Select "SELF-DIAG RESULTS", "DATA MONITOR" or "CAN
DIAG SUPPORT MNTR".
SELF-DIAGNOSTIC RESULTS
Operation Procedure
1.
Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
2.
Self-diagnosis results are displayed.
Display Item List
"TIME" indicates the condition of the self-diagnosis results judged by each signal input.
●
Normal: If the system is presently operating properly, but had a malfunction in the past, the time will indi-
cate "1-63".
●
Malfunction: Soon after detecting malfunctions by self-diagnoses or current malfunction, "0" is indicated.
After the system returns to normal operating condition, every time the ignition switch is cycled (turned to OFF
from ON), a value of one is added to the counter (i.e. "1"
→
"2"
→
"3"···"63"). When the ignition switch is cycled
64 times, the result of the self-diagnoses will be erased. If a malfunction is detected again, "0" will be indi-
cated.
DATA MONITOR
Operation Procedure
1.
Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
2.
Touch either "MAIN SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
3.
Touch "START".
BCIA0031E
SKIA4956E
CONSULT-II display
Malfunction
CAN COMM CIRC [U1000]
Malfunction is detected in CAN communication lines.
CAUTION:
Even when there is no malfunction on CAN communication system, malfunction may be
misinterpreted when battery has low voltage (when maintaining 7V-8V for about 2 sec-
onds) or 10A fuse [No. 19, located in the fuse block (J/B)] is removed.
VEHICLE SPEED CIRC [B2205]
Malfunction is detected when an erroneous speed signal is input.
CAUTION:
Even when there is no malfunction on speed signal system, malfunctions may be misin-
terpreted when battery has low voltage (when maintaining 7V-8V for about 2 seconds).
MAIN SIGNALS
Monitors main signals.
SELECTION FROM MENU
Selects and monitors individual signal.
COMBINATION METERS
DI-17
C
D
E
F
G
H
I
J
L
M
A
B
DI
2005 Pathfinder
4.
When "SELECTION FROM MENU" is selected, touch individual
items to be monitored. When "MAIN SIGNALS" is selected,
main items will be monitored.
5.
Touch "RECORD" while monitoring, then the status of the moni-
tored item can be recorded. To stop recording, touch "STOP".
Display Item List
SKIA4957E
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Contents
SPEED METER [km/h] or [mph]
X
X
This is the angle correction value after the speed signal
from the ABS actuator and electric unit (control unit) is con-
verted into the vehicle speed.
SPEED OUTPUT [km/h] or [mph]
X
X
This is the angle correction value before the speed signal
from the ABS actuator and electric unit (control unit) is con-
verted into the vehicle speed.
TACHO METER [rpm]
X
X
This is the converted value for the engine speed signal from
the ECM.
W TEMP METER [
°
C] or [
°
F]
X
X
This is the converted value for the water temp signal from
the ECM.
FUEL METER [lit.]
X
X
This is the processed value for the signal (resistance value)
from the fuel gauge.
DISTANCE [km]
X
X
This is the calculated value for the speed signal from the
ABS actuator and electric unit (control unit), the signal
(resistance signal) from the fuel gauge and fuel consump-
tion from ECM.
FUEL W/L [ON/OFF]
X
X
Indicates [ON/OFF] condition of low fuel warning lamp.
C-ENG W/L [ON/OFF]
X
Indicates [ON/OFF] condition of malfunction indicator lamp.
AIR PRES W/L [ON/OFF]
X
Indicates [ON/OFF] condition of low tire pressure indicator
lamp.
SEAT BELT W/L [ON/OFF]
X
Indicates [ON/OFF] condition of seat belt warning lamp.
BUZZER [ON/OFF]
X
X
Indicates [ON/OFF] condition of buzzer.
DOOR W/L [ON/OFF]
X
Indicates [ON/OFF] condition of door warning lamp.
HI-BEAM IND [ON/OFF]
X
Indicates [ON/OFF] condition of high beam indicator.
TURN IND [ON/OFF]
X
Indicates [ON/OFF] condition of turn indicator.
OIL W/L [ON/OFF]
X
Indicates [ON/OFF] condition of oil pressure warning lamp.
VDC/TCS IND [ON/OFF]
X
Indicates [ON/OFF] condition of VDC OFF indicator lamp.
ABS W/L [ON/OFF]
X
Indicates [ON/OFF] condition of ABS warning lamp.
SLIP IND [ON/OFF]
X
Indicates [ON/OFF] condition of SLIP indicator lamp.
BRAKE W/L [ON/OFF]
X
Indicates [ON/OFF] condition of brake warning lamp.*
KEY G W/L [ON/OFF]
X
Indicates [ON/OFF] condition of key warning lamp (green).
KEY R W/L [ON/OFF]
X
Indicates [ON/OFF] condition of key warning lamp (red).
KEY KNOB W/L [ON/OFF]
X
Indicates [ON/OFF] condition of key knob warning lamp.
M RANGE SW [ON/OFF]
X
X
Indicates [ON/OFF] condition of instruction mode range switch.
NM RANGE SW [ON/OFF]
X
X
Indicates [ON/OFF] condition of except for instruction mode
range switch.
AT SFT UP SW [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift-up switch.
AT SFT DWN SW [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift-down switch.
DI-18
COMBINATION METERS
2005 Pathfinder
NOTE:
Any monitored item that does not match the vehicle being diagnosed is deleted from the display automatically.
*: Monitor keeps indicating “OFF” when brake warning lamp is on because of parking brake operation or low
brake fluid level.
O/D OFF SWITCH [ON/OFF]
X
Indicates [ON/OFF] condition of O/D OFF switch.
BRAKE SW [ON/OFF]
X
Indicates [ON/OFF] condition of parking brake switch.
AT-M IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T instruction mode indicator.
AT-M GEAR [1, 2, 3, 4, 5]
X
X
Indicates [1, 2, 3, 4, 5] condition of A/T instruction mode gear
position.
P RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift P range indicator.
R RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift R range indicator.
N RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift N range indicator.
D RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift D range indicator.
4 RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift 4 range indicator.
3 RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift 3 range indicator.
2 RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift 2 range indicator.
1 RANGE IND [ON/OFF]
X
X
Indicates [ON/OFF] condition of A/T shift 1range indicator.
O/D OFF W/L [ON/OFF]
X
Indicates [ON/OFF] condition of O/D OFF indicator lamp.
CRUISE IND [ON/OFF]
X
Indicates [ON/OFF] condition of CRUISE indicator.
SET IND [ON/OFF]
X
Indicates [ON/OFF] condition of SET indicator.
4WD LOCK SW [ON/OFF]
X
Indicates [ON/OFF] condition of 4WD lock switch.
4WD LOCK IND [ON/OFF]
X
Indicates [ON/OFF] condition of 4WD lock indicator.
4WD W/L [ON/OFF]
X
Indicates [ON/OFF] condition of 4WD warning lamp.
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Contents
COMBINATION METERS
DI-19
C
D
E
F
G
H
I
J
L
M
A
B
DI
2005 Pathfinder
How to Proceed With Trouble Diagnosis
EKS009NG
1.
Confirm the symptom or customer complaint.
2.
Perform diagnosis according to diagnosis flow. Refer to
.
3.
According to the symptom chart, repair or replace the cause of the symptom.
4.
Does the meter operate normally? If so, go to 5. If not, go to 2.
5.
Inspection End.
Diagnosis Flow
EKS009NH
1.
CHECK WARNING INDICATOR ILLUMINATION
1.
Turn ignition switch ON.
2.
Make sure warning indicators (such as malfunction indicator lamp and oil pressure warning indicator) illu-
minate.
Do warning indicators illuminate?
YES
>> GO TO 2.
NO
>> Check ignition power supply system of combination meter. Refer to
.
2.
CHECK SELF-DIAGNOSIS OPERATION OF COMBINATION METER
Perform combination meter self-diagnosis. Refer to
DI-11, "SELF-DIAGNOSIS FUNCTION"
.
Does self-diagnosis function operate?
YES
>> GO TO 3.
NO
>> Check combination meter power supply and ground circuit. Refer to
.
3.
CHECK ODOMETER OPERATION
Check segment display status of odometer.
Is the display normal?
YES
>> GO TO 4.
NO
>> Replace
the
combination
meter.
Refer
to
"Removal and Installation of Combination Meter"
.
4.
CHECK COMBINATION METER CIRCUIT
Check operation of each meter/gauge in self-diagnosis mode.
OK or NG
OK
>> GO TO 5.
NG
>> Replace the combination meter. Refer to
DI-26, "Removal and Installation of Combination Meter"
.
5.
CHECK SELF-DIAGNOSTIC RESULTS OF METER
Select "METER" on CONSULT-II and perform self-diagnosis of meter.
Self-diagnostic results content
CAN COMM CIRC [U1000]>>Refer to
DI-25, "DTC [U1000] CAN Communication Circuit"
.
VEHICLE SPEED CIRC [B2205]>>Refer to
DI-26, "DTC [B2205] Vehicle Speed Circuit"
.
LKIA0581E
DI-20
COMBINATION METERS
2005 Pathfinder
Power Supply and Ground Circuit Inspection
EKS009NI
1.
CHECK FUSES
Check for blown combination meter fuses.
Refer to
DI-8, "Wiring Diagram — METER —"
.
OK or NG
OK
>> GO TO 2.
NG
>> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to
4, "POWER SUPPLY ROUTING CIRCUIT"
.
2.
CHECK POWER SUPPLY CIRCUIT
1.
Disconnect combination meter connector.
2.
Check voltage between combination meter harness connector
terminals and ground.
OK or NG
OK
>> GO TO 3.
NG
>> Check the harness for open between combination meter and fuse.
3.
CHECK GROUND CIRCUIT
Check continuity between combination meter harness connector ter-
minals and ground.
OK or NG
OK
>> Inspection End.
NG
>> Repair harness or connector.
Unit
Power source
Fuse No.
Combination meter
Battery
19
Ignition switch ON or START
14
Terminals
Ignition switch position
(+)
(–)
OFF
ACC
ON
Connector
Terminal
M24
3
Ground
Battery
voltage
Battery
voltage
Battery
voltage
16
0V
0V
Battery
voltage
WKIA3279E
Terminals
Continuity
(+)
(–)
Connector
Terminal
M24
13
Ground
Yes
23
WKIA3280E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст