Nissan X-Trail 32. Instruction — part 1719
PG-130
< BASIC INSPECTION >
FUSE INSPECTION
• Type A
- To turn the extended storage fuse switch OFF, pull it up in
direction as shown in the figure.
- To turn the extended storage fuse switch ON, press it in
direction as shown in the figure.
• Type B
- To turn the extended storage fuse switch OFF, hold
of the switch and pull up in
direction as shown in
the figure.
- To turn the extended storage fuse switch ON, press it in
direction as shown in the figure.
• Type C
- To turn the extended storage fuse switch OFF, pull it up in
direction as shown in the figure.
- To turn the extended storage fuse switch ON, press it in
direction as shown in the figure.
How To Remove Extended Storage Fuse Switch
Type A
JSMIA0472ZZ
JSMIA0473ZZ
JSMIA0794ZZ
PG
FUSE INSPECTION
PG-131
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
1.
Turn the ignition switch OFF.
2.
Turn the extended storage fuse switch OFF.
3.
Press pawl
and tilt to disengage the extended storage fuse
switch. Press pawl
and tilt to remove the extended storage
fuse switch.
CAUTION:
Never use fuse for bus bar.
NOTE:
• Extended storage fuse switch and bus bar are removed together. Remove bus bar from extended stor-
age fuse switch, if necessary.
• Install removed bus bar to fuse block.
• Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the
removal.
Type B
1.
Turn the ignition switch OFF.
2.
Turn the extended storage fuse switch OFF.
3.
Hold
and pull up the extended storage fuse switch hard in
direction.
CAUTION:
Never use fuse for bus bar.
NOTE:
• Extended storage fuse switch and bus bar may be removed together. Remove bus bar from extended
storage fuse switch, if necessary.
• Install removed bus bar to fuse block.
• Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the
removal.
Type C
1.
Turn the ignition switch OFF.
2.
Turn the extended storage fuse switch OFF.
JSMIA0476ZZ
JSMIA0477ZZ
PG-132
< BASIC INSPECTION >
FUSE INSPECTION
3.
Hold
and pull up the extended storage fuse switch hard in
direction.
CAUTION:
Never use fuse for bus bar.
NOTE:
• Extended storage fuse switch and bus bar are removed together. Remove bus bar from extended stor-
age fuse switch, if necessary.
• Install removed bus bar to fuse block.
• Extended storage fuse switch is for transportation and storage. Reinstallation is not required after the
removal.
JSMIA0795ZZ
PG
FUSIBLE LINK INSPECTION
PG-133
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
FUSIBLE LINK INSPECTION
How To Check
INFOID:0000000010709232
A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is
questionable, use circuit tester or test lamp.
CAUTION:
• If fusible link should melt, it is possible that critical circuit (power supply or large current carrying
circuit) is shorted. In such a case, carefully check and eliminate cause of malfunction.
• Never wrap outside of fusible link with vinyl tape. Important: Never let fusible link touch any other
wiring harness, vinyl or rubber parts.
Fusible link
Battery - QR25DE engine models
Battery - MR20DD engine models
Battery - R9M engine models
Engine room fuse box
Under the headlamp right - R9M en-
gine models
Under the headlamp left- R9M en-
gine models
Under the headlamp - Except for
R9M engine models
JSMIA1831ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст